Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...)

[voljega]

@bkg2k besides resume issue, which bugs on amiga ? (Did you upgrade the version already ?)

[Tarotho]

I want to report an error so that you fix in future updates.

I installed the image for raspberry pi 3 b +

recalbox sends the wrong signal by ctr. the image looks choppy

[lhari84]

@bkg2k Thanks, great news and work! If you have a new beta or even release candidate to test, I'm ready

Were you able to fix wifi issues on Pi3 B+ too? Or anything I should test here? I'd have few possibilities. For example I could try various access points with different settings, if this helps you finding the root of problem.

[Bkg2k]

@voljega amiberry has been b*mped to 2.24. The new configgen is almost finished.

[voljega]

@bkg2k Nice ! Sorry to not have been able to participate (in the middle of moving to a new flat)

Is it possible to have a link to commit branch for this update ?

[paradadf]

@voljega
https://gitlab.com/recalbox/recalbox/merge_requests/445

[voljega]

@paradadf thank you
(but the right one I was searching for is this one : https://gitlab.com/recalbox/recalbox-configgen/merge_requests/198/commits

@Bkg2k beautiful work ! I'll have to read more than the commits to understand it as I'm not that fluent nor good with OO Python ahahah

[Bkg2k]

@voljega
lol, I'm not that fluent either, but I like readable and efficient code

[naitreia]

Hi,

sorry for my bad english...

i tested the beta with the following Graficcards:
R9380X
RX580

With both Cards you can boot into the menu of Recalbox but than everything is extremely slow and unusable.

Im not sure if you meant this with:
some AMD GPU can have a glitched output, should be fixed in a coming release
so far, couldn't add the amdgpu driver (see this link for the GPU list), i'll try to fix this later

If so, take it only as info.

Regards
naitreia

[olivierdroid92]

@Bkg2k
Board : XU4
Image : Xmas 2018-12-24
Micro SD Only
Controller : Wired GameStop PS4 Fun Controller
I've noticed the following issues.

A-
When go to advanced setting, and change core MAME from DEFAUT to ADVANCEDMAME --> Crash. With "restart ES" it works but not possible to activate 'ADVANCED MAME".

B-
When I want to play with MAME2010 (release 0.139) I do not have any folder /recalbox/share/bios/mame2010/ so I've created one to copy CHEAT.ZIP. I only have /recalbox/share/bios/mame2003/ folder
Can be a good idea to create this folder to help newcomer

C-
In Web Manager, concerning Bios validation.
I do not have no information neither green nor red cross with SCPH1001.BIN
MD5 are OK

Merci d'avance

[Bkg2k]

@olivierdroid92 thanks for your report:
A- Metadata are very buggy on the Christmas beta. Everything has been fixed for next betas/releases
B- Easy improvement, validated
C- Never seen that issue before. Did you try with another browser?

[voljega]

@bkg2k I also had this C issue ((always had it), I think it's related to case of the filename

[olivierdroid92]

@Bkg2k @voljega

using Google chrome on W10

Case C
Image 2018-07-13
Bord RPI3B not +
Screenshoot RPI3B - Microcard only, RJ45, wired pad
No issue with scph1001.bin

Image Xmas 2018-12-24
Bord RPI3B not +
Screenshoot RPI3B - Microcard only, RJ45, wired pad
Iissue with scph1001.bin

--> When I change scph1001.bin to SCPH1001.BIN all was OK .

Point C Solved

[olivierdroid92]

@Bkg2k
For MAME2003-PLUS (0.78)
Cheat.dat file to be uploaded in : libretro system dir/mame2003-plus/
so it will be /recalbox/share/bios/mame2003-plus/
Same question : can this folder be created from the image ?

[benjy51]

@substring
Bonjour:

Pour ma part, sur odroid XU4:

• probleme sur manette 8bitdo:
  la premiere synchronisation: Ok . Puis, après plusieurs redémarages, les manettes sont oubliés, et on ne peux plus les associer.
• problème pour changer la durée du splashscreen (les intro ne sont pas lu en entier malgré les modifications dans le fichier S02splash).

Bon courage a l'équipe

[olivierdroid92]

@benjy51
Maybe the threat in French can help you
https://forum.recalbox.com/topic/13471/odroid-xu4-8bitdo-sn30-pro-probleme-avec-bt

Try / essai
Méthode 2b
bluetoothctl

[olivierdroid92]

@Bkg2k
Image : Xmas
Board XU4
RJ45
MicroSD card only
Wired pad

I played 1944 game on different MAME LIBRETRO cores : MAME0.78(2003) - MAME2003PLUS - MAME2010
Controls are not the same
To be clear I have 3 full complete rom set.

Any chance to remap controls on core MAME2003 PLUS and MAME2010 based on MAME2003.

Controls configured for MAME2003 are the most usefull.

[paradadf]

@olivierdroid92 definitely not. That‘s something the core manages and for thousands of roms and different cores it is practically impossible to achieve.

[toto23]

Hello there!
First of all, thank you for all that work, u are awesome.
I just bought a a raspberry 3b+ and installed the beta on it. I found 2 issues:

• Favorites are not "remembered" when you reboot. Always forgotten by recalbox when you restart, even if you don't choose the fast shutdown.
• Moonlight seems to have a problem with the 3.16 version of Geforce. It's a known issue, that some programmers did solve by compiling again Moonlight with some code correction :lien vers github. But for those who are not familiar with coding, there is no available solution.
  Thank u for reading this.

[phoenix887]

Hello,

I want to play with 4:3 ratio, because for me, the only one solution, I dont like 16:9 at my retro games. That is the reason why I need overlays, it looks much nicer for me, without black space at the left and right side.

But it doesnt work. Here what I did:

snes.cfg

path: recalbox\share\system\configs\retroarch\snes.cfg

content of snes.cfg:

input_overlay = "/recalbox/share/system/configs/retroarch/overlays/snes_overlay.cfg"

snes_overlay.cfg

path: "/recalbox/share/system/configs/retroarch/overlays/snes_overlay.cfg"

content of snes_overlay.cfg:

overlays = "1"

overlay0_overlay = "snes.png"

overlay0_full_screen = "true"

overlay0_descs = "0"

snes.png

path: "/recalbox/share/system/configs/retroarch/overlays

Can anybody help me? where is the error? Or a Bug of the beta version of recalbox?

Thanks in advance

PS: Yes I know the manual: https://github.com/recalbox/recalbox-os/wiki/Retroarch-setup-overlays-(EN)

I did every step within the chapter Overlays by system