Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...)

[fosi]

Hello I made a fresch flash with the Christmas beta and now the Dreamcast games don't start anymore.
Anybody else have this problem?

[olivierdroid92]

@OyyoDams, @paradadf
Dear All dev team
Thanks a lot for all works performed

Board : XU4
Image : 2018.12.24.Christmas.Beta

Issue : I can not connect with SSH,
also, I failed to get support archive link

Regards

[OyyoDams]

@olivierdroid92 maybe because old ssh keys are still registered in putty, try to reset them

[smashboy2000]

@olivierdroid92 J'ai eu le même problème : il faut appuyer très légèrement sur L2 et R2 sinon ça s'emballe.
I had the same issue : you have to press L2 and R2 gently or you'll get into trouble.

[OyyoDams]

@smashboy2000 quel rapport entre putty et L2/R2 ?

[smashboy2000]

@oyyodams Aucun : regarde le message auquel je répond.

... Oh flûte, j'ai répondu à un message vieux de 4 mois en croyant qu'il venait d'être posté.
Cette page regroupe toutes les updates en fait, c'est ça ? (j'suis encore novice dans ce forum)

[smashboy2000]

Après une petite demi-heure de test sur mon Rapsberry Pi 3, quelques conclusions :

• Tous les jeux qui fonctionnaient avant, fonctionnent toujours
• Mes jeux PSP ne fonctionnaient pas : c'est dorénavant le cas ^^
• Seul problème rencontré : au moment de configurer la manette PS4, il m'est impossible d'assigner le touchpad à un bouton

Je n'utilise pas le Wi-Fi ni de clavier, je n'ai donc pas pu essayer.

[olivierdroid92]

@oyyodams

Board : XU4 (192.168.4.105)
Image : 2018.12.24.Christmas.Beta
I've tried again with another system and can not acces to XU4 using SSH
I did not get the box to update key

Board : RPI3B (192.168.4.106)
Image : 2018-07-13
It's work
I confirm key was updated

[Marco Polo]

Pas d'update c'est bien pour ceux qui non encore rien installer sur leurs PI3B+ mais pour les autres il faut attendre une mise a jour ou c'est mort??

[OyyoDams]

@marco-polo vu la complexité de cette mise à jour, il est difficilement concevable d'envisager une mise à jour standard justement. Prévois un backup de tes roms

[Pattick76]

@paradadf B*mp 507 RPI3 (2018/11/12) beta was the best release for me! Running like a stable release with everything working. All my games from 20 Systems, PS4-Bluetooth-Controller, 5GHz-Wifi,1500Mhz-overclocking, overall stability on my RPi3B+...everything just running perfectly. Nice to have it. Thanks for good work!
Where can I find my UI-settings, overall gameplay- and emulatorsettings, audio etc. stored to copy&paste them later into the future final release (foldername?/filename?)? Not all my menu-settings are stored in the recalbox.conf(?). (My games are stored on external USB-drive.)
Thanks for reply.

[Marco Polo]

@oyyodams Je vais prévoir cela, en tout cas super taf de la team Recalbox et beau cadeau de noël pour les Retro Gamers que nous sommes ^^
Juste les roms pour le backup pas autre choses avant de me lancer?

[Mathis Demonceaux]

Bonjour je joue avec une manette PS4 dans les menus celle ci ne fonctionne dans aucun jeu

[Mathis Demonceaux]

J'utilise un raspberry pi 3 b+

[Marco Polo]

Ça y est j'ai sauter le pas par contre il m'est impossible d’associer ma 8bitdo NES30 Pro, il la trouve bien mais "impossible d'associer la manette" et les touche A et B sont inverser sur ma manette filaire Xbox !

[olivierdroid92]

@OyyoDams
I think there is a SSH issue

Image : 2018.12.24.Christmas.Beta on XU4 = SSH access failed
Image : 2018.12.24.Christmas.Beta on RPI3B = SSH access failed
Image : 2018.07.13 on both RPI3 and XU4 = SSH access granted

[x08fd]

@olivierdroid92 said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

@OyyoDams
I think there is a SSH issue

Image : 2018.12.24.Christmas.Beta on XU4 = SSH access failed
Image : 2018.12.24.Christmas.Beta on RPI3B = SSH access failed
Image : 2018.07.13 on both RPI3 and XU4 = SSH access granted

I somehow experienced the same. I actually was able to SSH in, but since I have chosen external storage devices, SSH will tell me the connection was closed by xxxx. Not sure if those are related.

[x08fd]

I'm fairly new here, Christmas beta was actually the first recalbox I have installed on RPI3B+.
This is driving me nuts. I tried to modify the save/load state keys mapping and change to left/right shoulder button. However, every time I modify the file retroarchcustom.cfg, it gets reverted once I enter the game. With a yellow text below saying "Configuration Override loaded", which I assume was doing the change.

I also modified the input/DEFAULT.cfg file but it doesn't seem helpful either.

And the config file in share_init folder, I modified what I could find, not helpful.

So who's reverting those files? I'm rather confused. What should I do to change those settings?

[olivierdroid92]

@x08fd , @OyyoDams
You are right !
On RPI3B, image 2018.12.24.Christmas.Beta

• with storage set as INTERNAL, SSH access WORKS,
• with storage set as USB Stick, SSH access FAILED.

[lhari84]

@lhari84 said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

@lhari84
Sorry, have to reply instead of further updating last post, because of some spam protection...:
Really have troubles with Wifi, connection just crashes when copying just 16 Megabytes of savegames by using SMB share.
Can exclude a problem with my Wifi, all clients, including latest Recalbox stable work like a charm with my wireless network, so problem occurs with latest beta only.
See screenshot (ping) too, in the end copy process crashes because auf connection loss:

Also interferrence with bluetooth controller is still present.
And I'm using Pi 3 B+ for testing.

Hi,
In the meanwhile I have changed my Repeater, since I had another one for backup.
Here I used the 5 GHz network and everything seems to work fine. No bluetooth issues, no fail of connection when copying files....

Old repeater: TP-Link RE450 v1
New repeater: Fritz! Repeater 1750E
... both with latest firmware installed.

So in conclusion I cannot say if it's a 2,4 GHz problem (with many or all routers/repeaters affected), or it's just a problem with that christmas beta has with TP-Link RE450 v1... But there is a problem for sure, because as mentioned, I never had any problem with the old repeater in cooperation with other devices/systems.
Hope this information helps to improve.