Keybindings via GPIO

[hstampfl]

Thanks for your fast response. I asked for rebinding, so that I can use the portapi image or recalboxos vice versa without recabeling the whole arcade. In this case it makes sense to do one one system a redefineing the keys. But in this case I think I will do it on the portapi image.

[digitaLumberjack]

That would be the best solution, because even if you recompile you own version of mk_arcade_joystick_rpi on the recalbox, an update would erase overwrite your module with the original one...

[hstampfl]

When I only use GPIO based Josystick, what is the Hotkey there? On the pinout I only can see Start and Select.

[digitaLumberjack]

You can use select, no shortcut is set for select.

[hstampfl]

thank you. I just finished the cabeling in my cabinet. I enabled GPIO Interface in the Settings, but it seems that they are not working on my RPi2. Is there a way to troubleshoot this? I verfied the cabeling twice. When I try to configure the controller it detects 2 controllers. I only have an 1 Player cabinet. But I think this could not be an issue only to do the cabeling for player 1.

[hstampfl]

A small update: With a RaspberryPi B+ the GPIO Controller works. Only with my RaspberyPi 2 it does not work. PS: When I assign the Hotkey to the Select button is not a real good solution. When I do that it cloeses the emulations wenn I need to use the select button.

[digitaLumberjack]

A small update: With a RaspberryPi B+ the GPIO Controller works. Only with my RaspberyPi 2 it does not work.

I openened an issue https://github.com/digitalLumberjack/recalbox-os/issues/24

When I assign the Hotkey to the Select button is not a real good solution. When I do that it cloeses the emulations wenn I need to use the select button.

That's a bug since the shortcut to exit games is : Hotkey + Start Could you tell me more about that ?

[hstampfl]

When I assign the Hotkey to the Select button is not a real good solution. When I do that it cloeses the emulations wenn I need to use the select button.

It's not a bug. I found a cabeling error on my side. It works as it should - Hotkey + Start to exit. Do you need more information about the GPIO stuff on RPi2?

[digitaLumberjack]

I found why it doesn't work, thank you for the feedback. It will be corrected in the next release

[hstampfl]

Thank you, I hope it does not take too long until the next release