GPIO ONOFF Powerswitch / Resetbutton Problem

[supernature2k]

@megakoni what is your issue?

[megakoni]

@supernature2k i still get the power button triggered with pluging something into usb or audio jack and it shuts down. This only happens when the system.power.switch=PIN356ONOFFRESET script is enabled. So i was wondering if there is a new script for power and reset function since the new update

[supernature2k]

@megakoni no sorry, the fix is ready and should be in the next release.
Meanwhile, you can try the script posted above.

[megakoni]

@supernature2k ok thanks i'll wait then. I tried to implement (i'm a noob xD) the script but it didn't seem to run, so i don't know yet if it works

[megakoni]

@supernature2k so i got the new update.
Can you explain me how exactly the new power switch works? Reset button is i guess like 3 seconds of pressing down to reboot.
But i don't know exactly how the power switch works to turn off.
Turning on is simple, just switch it to on.
But turning off it seems i have to switch 3 times, but sometimes it does not work.
Is there a specific period of time i have to wait for the 3 times switching?

[unik314r]

Also interrested here: looks like my power and reset buttons doesn't work anymore since the last update (X-MAS update)
Any hints?

[unik314r]

@megakoni said in GPIO ONOFF Powerswitch / Resetbutton Problem:

But i don't know exactly how the power switch works to turn off.

Well I managed to find out by myself: POWER button works the exact same way as RESET button: when Recalbox ON, push the power button during 3 seconds, release it --> shutdown launched.

So according to me, you don't have to push the button 3 times.

EDIT: to show they work the same way: they have the same code line:

# grep GPIO.add_event_detect /recalbox/scripts/rpi-pin356-power.py 
GPIO.add_event_detect(RESETPLUS, GPIO.BOTH, callback=button_pressed, bouncetime=2)
GPIO.add_event_detect(POWERPLUS, GPIO.BOTH, callback=button_pressed, bouncetime=2)

[megakoni]

@unik314r but i have a power switch, not a button. My Reset trigger is a momentary button. for power i use a switch (i build my raspberry into a snes case)
and i use the system.power.switch=PIN356ONOFFRESET that was commented in the recalbox.conf.

And by the way, how and where can i find this script? And can i simply edit it?

[NeeeeB]

Have a look here :
/recalbox/scripts/

[unik314r]

@megakoni To edit a file: have a look at https://github.com/recalbox/recalbox-os/wiki/Edit-the-config.txt-file-(EN)
The file you're looking for is /recalbox/scripts/rpi-pin356-power.py .

--
I Also use a modified SNES but don't like switch buttons (Recalbox python script looks for a status change --> going from on to off is the same as going from off to on and I find it not very convenient)
So I turned the original power switch button into a momentary one (inside the SNES, a simple spring makes the button go back) so that when I want to turn on (or off) the SNES, it pushes a momentary button (that I glued inside the snes) and automatically comes back: that way, even if there is a general power cut and then power restored (or something else that electrically unplugs/plugs the SNES), the system doesn't boot with a power button positionned to off.

But I suppose this is not what you're looking for^^

[megakoni]

@unik314r thanks for the info. I also thought of glueing a button in the inside, so the "switch" then just bounces back.
But i think i stay with the switch. I just really enjoy that satisfying click sound and feel of using that original switch.
Then i'll just have to shut down switching 3 times or using the menu command. At least i get no shut downs anymore when i plug in something to usb etc.

[unik314r]

@megakoni I agree with you, the switch sound is oddly satisfying But I have it on my original non-modified SNES