Buttons are pressed without touching them!!

[saver]

I also tried another sd card with another image but again the same problem. On the pi i have only the screen hdmi cable the power supply and the keybord

[voljega]

@saver it's likely you have some autofire button and/or combination of your buttons on your xinmo if such thing exists, and your nephew activated it, check the doc

or your connections were crappy and by pressing a bit violently on the buttons, your nephew created a shortcut, check connections of your buttons

[saver]

@voljega but i have the same problem with xinmo buttons unplugged. Only with the keybord. I also tried ps3 controler and again the same problem. I am desperate. Maybe i have to buy a brand new raspberry pi

[Substring]

@saver with a bluetooth PS3 pad you mean ?

[saver]

@substring sorry ps1 usb controler not bluetooth

[Substring]

@saver so you have a mad usb uh ? Does the same happen if you unplug ecerything but power supply, hdmi, and you try raspbian ?

[saver]

The problem is solved fortunately. I tried to connect the hole system with my tv screen via hdmi and everything was OK. So i replaced the hdmi cable of the cabinet with the tv hdmi cable and everythik work perfect. Although i don t think this was the problem. Thank you very much for your time.

[saver]

How can i upload a video to show you the problem? I am desperate. I have tried everything. I have replaced all the parts of my setup but i have the same problem.

[Substring]

@saver run evtest for each input and see which one is doing that mess

[saver]

@substring can you please give me directions how to run evtest because i m not so familiar with this. Thanks in advance

[Substring]

@saver ssh to your recalbox, type evtest, then test input 0 to see if there are some events happening by themselves with no user action. Press CTRL+C, try then with input 1 etc ...

In the end, give me the name of the input(s) that had ghost inputs

[saver]

@substring thank you very much but i need additional help. I run evtest then i press 0 and then i don t know what to do. How can i understand if some events are happening by themselves with no user action?

[Substring]

@saver they'd just pop after the description of known events the input reports

[saver]

@substring i run evtest via putty and i took a photo to show you the results. I couldn t copy the text. How can i upload a photo please?

[saver]

@saver said in Buttons are pressed without touching them!!:

@substring i run evtest via putty and i took a photo to show you the results. I couldn t copy the text. How can i upload a photo please?

https://postimg.cc/image/iaejz53yd/

[Substring]

@saver nothing happens after the "Testing..." You should try events 2 and 3. By tthe way, are you using the GPIO controllers as you have a xinmo ?

[Andrei]

I got the same problem but only in Kody, with "Zero delay" arcade joystick

[saver]

@substring how do i continue to event 2 or 3? And sorry but i didn t understad your question. I use the xin mo set - 18buttons. I bought it from ultracabs while i was following orders from here http://www.instructables.com/id/2-Player-Bartop-Arcade-Machine-Powered-by-Pi/ . Ps. Thank you for your patience with me and for your answers and realy sorry for my awful english

[Substring]

@saver use the recalbox webmanager to edit recalbox.conf and disable the gpio driver. Set controllers.gpio.enabled to 0

[saver]

@substring i have this image to my sdcard https://www.youtube.com/watch?v=kklTCp8HZBo and i can t find to the menu the recalbox webmanager to edit recalbox.conf. I tried from the config text but i didn t find "controllers.gpio.enabled"
I made two arcade cabinet with the same setup and i have this problem only in one of them. Do you thing that if i disable the gpio driver i will fix it?