Adjustment of the video clip of the composite video signal at the output of 3.5 jack

[Edvis]

@Эдвис-Фатходинов overscan sorry

[Edvis]

@Эдвис-Фатходинов After entering the overscan, the picture is mixed only when the recalbox is loaded, and there are no changes in the menu and in the games

[Substring]

@Эдвис-Фатходинов Privet !

How have you edited the config.txt ? by plugging your SD on windows ?

[Edvis]

@Substring Through SSH with the help of the program Putty)

[Substring]

@Эдвис-Фатходинов noobs has some overscan by default, but ypu should be able to manage it by yourself. Could you paste your config.txt bet between triple back-quotes (if not, nevermind, that's just for how the text would be displayed)

[Edvis]

@Substring вы по русски говорите?

[Edvis]

@Substring http://prntscr.com/ek8aok
http://prntscr.com/ek8ave
http://prntscr.com/ek8b0e

[Substring]

@Эдвис-Фатходинов ja tchut tchut i ochen ploxo govorju po russki. Nekogda ne pishu ruskom

Anyway : you can select text in putty, it's automatically copied to the clipboard. I'm not sure I can see what I would like

[Edvis]

@Substring what text? This is all that is in the config. What exactly would you like to see?

[Substring]

@Эдвис-Фатходинов open putty then `cat /boot/config.txt' and give me the full result

[Edvis]

@Substring I gave you the full result and threw off in three links

[Edvis]

@Substring # uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1

disable_overscan=1

uncomment to force a specific HDMI mode (this will force VGA)

#hdmi_group=1
#hdmi_mode=1

comment to get jack audio

audio_pwm_mode=2

force hdmi while the tv can take time before sending the signal on the hdmi output

#hdmi_force_hotplug=1

comment for composite PAL

sdtv_mode=2
sdtv_aspect=1

uncomment for lirc-rpi

#dtoverlay=lirc-rpi

if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or give a low resolution because tv had no enough time to initialize it

#boot_delay=3

uncomment if you don't want the rainbow at startup

#isable_splash=1

Overclock

gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512

avoid_safe_mode=1

kernel=zImage

NOOBS Auto-generated Settings:

hdmi_ignore_hotplug=1
overscan_scale=0

[Substring]

As i thought, you have no overscan values. So enabling it is like having an overscan of 0. You should manually add the values yourself

[Edvis]

@Substring Hooray!!! Hooray!!! WOW !!! At me all has turned out !!!! thank you very much!!! You are the best moderator, thank you. Sorry that wasted your time! Thanks)))

[Substring]

@Эдвис-Фатходинов i'm glad i could help you have fun with your recalbox ^^

[Edvis]

@Substring thank you very match))

[Edvis]

@Эдвис-Фатходинов Suddenly komuto help. Shorter off any shaders, in the menu ui settings enabled the function overscan
And already in the config, I entered on the screen in which direction to move the screen.
my config: uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
disable_overscan=0
uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
comment to get jack audio
audio_pwm_mode=2
force hdmi while the tv can take time before sending the signal on the hdmi ou tput
#hdmi_force_hotplug=1
comment for composite PAL
sdtv_mode=2
sdtv_aspect=1
uncomment for lirc-rpi
#dtoverlay=lirc-rpi
if you plug your tv at the same time as your rpi and that the rpi switches fro m the hdmi or give a low resolution because tv had no enough time to initialize it
#boot_delay=3
uncomment if you don't want the rainbow at startup
#isable_splash=1
Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
avoid_safe_mode=1
kernel=zImage
NOOBS Auto-generated Settings:
hdmi_ignore_hotplug=1
overscan_scale=1
overscan_left=25
overscan_right=7
overscan_top=-22
overscan_bottom=-25