manette neo geo usb ps3
-
@spro j'essaie de regarder ce soir ou demain, je ne te promets rien
-
Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x1f4f product 0x8 version 0x111 Input device name: "EXAR USB JOYSTICK PS3" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 304 (BTN_SOUTH) Event code 305 (BTN_EAST) Event code 306 (BTN_C) Event code 307 (BTN_NORTH) Event code 308 (BTN_WEST) Event code 309 (BTN_Z) Event code 310 (BTN_TL) Event code 311 (BTN_TR) Event code 312 (BTN_TL2) Event code 313 (BTN_TR2) Event code 314 (BTN_SELECT) Event code 315 (BTN_START) Event code 316 (BTN_MODE) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 0 Min 0 Max 255 Flat 15 Event code 1 (ABS_Y) Value 0 Min 0 Max 255 Flat 15 Event code 2 (ABS_Z) Value 0 Min 0 Max 255 Flat 15 Event code 5 (ABS_RZ) Value 0 Min 0 Max 255 Flat 15 Event code 16 (ABS_HAT0X) Value 0 Min -1 Max 1 Event code 17 (ABS_HAT0Y) Value 0 Min -1 Max 1 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Properties: Testing ... (interrupt to exit)
P: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1F4F:0008.0003/input/input2/event2 N: input/event2 S: input/by-id/usb-EXAR_USB_JOYSTICK_PS3_1.0.0-event-joystick S: input/by-path/platform-3f980000.usb-usb-0:1.4:1.0-event-joystick E: DEVLINKS=/dev/input/by-id/usb-EXAR_USB_JOYSTICK_PS3_1.0.0-event-joystick /dev/input/by-path/platform-3f980000.usb-usb-0:1.4:1.0-event-joystick E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1F4F:0008.0003/input/input2/event2 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_JOYSTICK=1 E: ID_MODEL=USB_JOYSTICK_PS3 E: ID_MODEL_ENC=USB\x20JOYSTICK\x20PS3 E: ID_MODEL_ID=0008 E: ID_PATH=platform-3f980000.usb-usb-0:1.4:1.0 E: ID_PATH_TAG=platform-3f980000_usb-usb-0_1_4_1_0 E: ID_REVISION=0001 E: ID_SERIAL=EXAR_USB_JOYSTICK_PS3_1.0.0 E: ID_SERIAL_SHORT=1.0.0 E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=EXAR E: ID_VENDOR_ENC=EXAR E: ID_VENDOR_ID=1f4f E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: USEC_INITIALIZED=12741734
[ 2.591638] usb 1-1.4: New USB device found, idVendor=1f4f, idProduct=0008 [ 2.591652] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.591658] usb 1-1.4: Product: USB JOYSTICK PS3 [ 2.591664] usb 1-1.4: Manufacturer: EXAR [ 2.591670] usb 1-1.4: SerialNumber: 1.0.0 [ 4.837820] cfg80211: Calling CRDA to update world regulatory domain [ 7.997820] cfg80211: Calling CRDA to update world regulatory domain [ 11.157819] cfg80211: Calling CRDA to update world regulatory domain [ 12.597836] hid-generic 0003:1F4F:0008.0003: usb_submit_urb(ctrl) failed: -1 [ 12.597847] hid-generic 0003:1F4F:0008.0003: timeout initializing reports [ 12.598072] input: EXAR USB JOYSTICK PS3 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1F4F:0008.0003/input/input2 [ 12.598204] hid-generic 0003:1F4F:0008.0003: input,hidraw2: USB HID v1.11 Gamepad [EXAR USB JOYSTICK PS3] on usb-3f980000.usb-1.4/input0
-
@spro ca devrait marcher ... Tu peux te connecter en SSH lancer la sommande
evtest
, choisir ton pad et voir que ca réagit ? -
@spro faut pas oublier que pour lancer la configuration du nouveau pad,
il faut lancer la configuration avec le clavier ou virtualgamepad ou une autre manette. -
dsl du temps jai du partir, alors elle est detecter mais ne repond pas du tout, merci du teps passer à m aider @Substring
-
@spro tu as essayé evtest ?
-
@substring hello, oui j ai tester, ça ne marche pas, cdt
-
@spro pas bon ça
-
Hello dsl du temps de rep, la manette serait peu etre zoner, ou ferait je mal quelque chose, je decouvre en meme temps pas mal de chose j avoue donc je suis loin detre doué en info @substring
-
@spro non, le pb est que linux n'arrive pas a dialoguer avec otn pad. Donc là je seche