manette neo geo usb ps3

[spro]

http://www95.zippyshare.com/v/tQWyrrGt/file.html
et voila, merci beaucoup @substring

[Substring]

@spro j'essaie de regarder ce soir ou demain, je ne te promets rien

[acris]

@Substring

Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x1f4f product 0x8 version 0x111
Input device name: "EXAR USB JOYSTICK PS3"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 304 (BTN_SOUTH)
    Event code 305 (BTN_EAST)
    Event code 306 (BTN_C)
    Event code 307 (BTN_NORTH)
    Event code 308 (BTN_WEST)
    Event code 309 (BTN_Z)
    Event code 310 (BTN_TL)
    Event code 311 (BTN_TR)
    Event code 312 (BTN_TL2)
    Event code 313 (BTN_TR2)
    Event code 314 (BTN_SELECT)
    Event code 315 (BTN_START)
    Event code 316 (BTN_MODE)
  Event type 3 (EV_ABS)
    Event code 0 (ABS_X)
      Value      0
      Min        0
      Max      255
      Flat      15
    Event code 1 (ABS_Y)
      Value      0
      Min        0
      Max      255
      Flat      15
    Event code 2 (ABS_Z)
      Value      0
      Min        0
      Max      255
      Flat      15
    Event code 5 (ABS_RZ)
      Value      0
      Min        0
      Max      255
      Flat      15
    Event code 16 (ABS_HAT0X)
      Value      0
      Min       -1
      Max        1
    Event code 17 (ABS_HAT0Y)
      Value      0
      Min       -1
      Max        1
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
Properties:
Testing ... (interrupt to exit)

P: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1F4F:0008.0003/input/input2/event2
N: input/event2
S: input/by-id/usb-EXAR_USB_JOYSTICK_PS3_1.0.0-event-joystick
S: input/by-path/platform-3f980000.usb-usb-0:1.4:1.0-event-joystick
E: DEVLINKS=/dev/input/by-id/usb-EXAR_USB_JOYSTICK_PS3_1.0.0-event-joystick /dev/input/by-path/platform-3f980000.usb-usb-0:1.4:1.0-event-joystick
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1F4F:0008.0003/input/input2/event2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_JOYSTICK=1
E: ID_MODEL=USB_JOYSTICK_PS3
E: ID_MODEL_ENC=USB\x20JOYSTICK\x20PS3
E: ID_MODEL_ID=0008
E: ID_PATH=platform-3f980000.usb-usb-0:1.4:1.0
E: ID_PATH_TAG=platform-3f980000_usb-usb-0_1_4_1_0
E: ID_REVISION=0001
E: ID_SERIAL=EXAR_USB_JOYSTICK_PS3_1.0.0
E: ID_SERIAL_SHORT=1.0.0
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=EXAR
E: ID_VENDOR_ENC=EXAR
E: ID_VENDOR_ID=1f4f
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=12741734

[    2.591638] usb 1-1.4: New USB device found, idVendor=1f4f, idProduct=0008
[    2.591652] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.591658] usb 1-1.4: Product: USB JOYSTICK PS3
[    2.591664] usb 1-1.4: Manufacturer: EXAR
[    2.591670] usb 1-1.4: SerialNumber: 1.0.0
[    4.837820] cfg80211: Calling CRDA to update world regulatory domain
[    7.997820] cfg80211: Calling CRDA to update world regulatory domain
[   11.157819] cfg80211: Calling CRDA to update world regulatory domain
[   12.597836] hid-generic 0003:1F4F:0008.0003: usb_submit_urb(ctrl) failed: -1
[   12.597847] hid-generic 0003:1F4F:0008.0003: timeout initializing reports
[   12.598072] input: EXAR USB JOYSTICK PS3 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1F4F:0008.0003/input/input2
[   12.598204] hid-generic 0003:1F4F:0008.0003: input,hidraw2: USB HID v1.11 Gamepad [EXAR USB JOYSTICK PS3] on usb-3f980000.usb-1.4/input0

[Substring]

@spro ca devrait marcher ... Tu peux te connecter en SSH lancer la sommande evtest, choisir ton pad et voir que ca réagit ?

[acris]

@spro faut pas oublier que pour lancer la configuration du nouveau pad,
il faut lancer la configuration avec le clavier ou virtualgamepad ou une autre manette.

[spro]

dsl du temps jai du partir, alors elle est detecter mais ne repond pas du tout, merci du teps passer à m aider @Substring

[Substring]

@spro tu as essayé evtest ?

[spro]

@substring hello, oui j ai tester, ça ne marche pas, cdt

[Substring]

@spro pas bon ça

[spro]

Hello dsl du temps de rep, la manette serait peu etre zoner, ou ferait je mal quelque chose, je decouvre en meme temps pas mal de chose j avoue donc je suis loin detre doué en info @substring

[Substring]

@spro non, le pb est que linux n'arrive pas a dialoguer avec otn pad. Donc là je seche