Xbox 360 wireless controller working ?

[hstampfl]

1. I cannot fully complete the button setup, it does not fully recognize the LT and RT buttons, it seems to think that I am holding a button when I press another one, as a result it will skip button R2 automatically as soon as I finish setting up L2. Other then that it just works fine.

I have this issue also seen with the Logitech F710 Controller. You can then go up with the arrow keys on a connected keyboard and press this button again on the Controller. With this procedure I could complete the whole keymapping.

[supaaman]

Hello, I'm glad to hear that the wireless xbox 360 controller works but unfortunately I'm not able to make it work at home. Can you tell me what is the procedure to follow from the beginning? Thanks a lot.

[neko]

Hi Supaaman, you do have the "Wireless Gaming Receiver for Windows" right? The procedure is the same as using it on windows, except you don't need to install any software. Just plug, connect, and play. also be aware that there is a lot of fake mock up receiver on the market, make sure you get a real one.

[supaaman]

This is exactly what I did and I try reinstalling Recalbox but same issue. I bough my Wireless gaming receiver several years ago and it worked, I tried on my Macbook Air and no issue.

[hstampfl]

@supaaman: can you please post the exact model number from your wireless gaming receiver?

[supaaman]

P/N X809782-008, PID 84294-523-5147585-00738 Is this the serial you're looking for? Thanks for your help

[digitaLumberjack]

Hi, https://github.com/digitalLumberjack/recalbox-os/issues/89 If someone has it

[hstampfl]

@Supaaman: I do have exactly the same dongle. I've just verified. The dongle is recognized correctly. You can verify when you plug in the dongle and execute dmesg from commandline. You should get something simmilar to this:

[  131.098217] usb 1-1.5: new full-speed USB device number 6 using dwc_otg
[  131.227347] usb 1-1.5: New USB device found, idVendor=045e, idProduct=0719
[  131.227404] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  131.227424] usb 1-1.5: Product: Xbox 360 Wireless Receiver for Windows
[  131.227442] usb 1-1.5: Manufacturer: ©Microsoft
[  131.227457] usb 1-1.5: SerialNumber: FF589EE0
[  131.385676] input: Xbox 360 Wireless Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/input/input2
[  131.403216] input: Xbox 360 Wireless Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.2/input/input3
[  131.422131] input: Xbox 360 Wireless Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.4/input/input4
[  131.444205] input: Xbox 360 Wireless Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.6/input/input5
[  131.451429] usbcore: registered new interface driver xpad

The controller is alwas flashing on the XBOX buton, even after pressing the sync buttons on both sides. You can try to configure the controller via emulationstation, and press the A butten and you should see that emulationstation does recognize your controler. There is an issue with the HOTKEY assignmend in emulationstation.

[hstampfl]

@Supaaman: a short update, there is a lot going on about the xbox driver implementation, be patient

[supaaman]

I'm glad to hear it, I'm a noob but I try to understand.

[supaaman]

I saw the 3.2.7 version and tried it, everything works perfectly but I notice an issue for me: I don't have any USB keyboard (only mouse) so I cannot enter the information for my Wifi network. Is there a way to add a virtual keyboard usable by the Xbox 360 controller? Perhaps I ask to much but It will be great Thanks a lot for all the time you spend on this project!

[hstampfl]

have a look here: https://github.com/digitalLumberjack/recalbox-os/wiki/recalbox.conf-(EN) it's on a fat32 partition, you can edit the file from a windows pc.