Config joystick ultra ulia eurofp

strikers94

Bonjour Merci pour ta réponse radpie, donc il faut que j'edite le fichier de conf si j'ai compris...(??) Je teste ce soir et te donne un retour Encore merci

acris

Bonjour non tu lances la configuration de la manette dans emulationstation comme la première fois. bouton start puis options manettes et tu configures le D-PAD et tu échappes les joysticks analogiques car tu n'en as pas sur ce type de stick arcade.

strikers94

ok Merci j'essaye ce soir

strikers94

Bonsoir Bon je viens de tester la manipe... rien.. j'ai bien la manette qui est reconnue comme un contrôleur ps3, mais après avoir configurer le bouton haut du joystick plus rien ne passe sauf les boutons... J'ai tester le joystick sur ma ps3 pour être sur qu'il fonctionne, et pas de soucis... J'ai cru lire qu'il y avait un outil pour configurer manuellement les manettes sur recalbox... je cherche de ce coté la... Merci a vous pour votre aide, si je trouve, je vous dit Serge

strikers94

Pour info si ca peut aider... voici le resultat de la commande dsmeg: # dmesg [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.13-v7 (root@e2db399ee219) (gcc version 4.9.3 (Buildroot 2016.02-git-gd2f6fbf-dirty) ) #1 SMP PREEMPT Sat Mar 12 22:59:58 UTC 2016 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] cma: Reserved 8 MiB at 0x1e400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 126976 [ 0.000000] free_area_init_node: node 0, pgdat 80873000, node_mem_map 9dfa4000 [ 0.000000] Normal zone: 1116 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010) [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 [ 0.000000] PERCPU: Embedded 13 pages/cpu @9efae000 s20608 r8192 d24448 u53248 [ 0.000000] pcpu-alloc: s20608 r8192 d24448 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125860 [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=592 bcm2708_fb.fbheight=448 bcm2709.boardrev=0xa01041 bcm2709.serial=0x7176ee87 smsc95xx.macaddr=B8:27:EB:76:EE:87 bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p7 rootwait fastboot noswap ro [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 485096K/507904K available (6043K kernel code, 534K rwdata, 1652K rodata, 420K init, 757K bss, 14616K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0x9f800000 - 0xff000000 (1528 MB) [ 0.000000] lowmem : 0x80000000 - 0x9f000000 ( 496 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x8078c0b4 (7697 kB) [ 0.000000] .init : 0x8078d000 - 0x807f6000 ( 420 kB) [ 0.000000] .data : 0x807f6000 - 0x8087bb54 ( 535 kB) [ 0.000000] .bss : 0x8087e000 - 0x8093b7dc ( 758 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:608 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000033] Switching to timer-based delay loop, resolution 52ns [ 0.000323] Console: colour dummy device 80x30 [ 0.000559] console [tty3] enabled [ 0.000598] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000624] pid_max: default: 32768 minimum: 301 [ 0.000992] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001013] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002288] Initializing cgroup subsys blkio [ 0.002328] Initializing cgroup subsys memory [ 0.002363] Initializing cgroup subsys devices [ 0.002390] Initializing cgroup subsys freezer [ 0.002428] Initializing cgroup subsys net_cls [ 0.002498] CPU: Testing write buffer coherency: ok [ 0.002581] ftrace: allocating 20249 entries in 60 pages [ 0.051795] CPU0: update cpu_capacity 1024 [ 0.051839] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.051856] [bcm2709_smp_prepare_cpus] enter [ 0.051983] Setting up static identity map for 0x8240 - 0x8274 [ 0.111652] [bcm2709_boot_secondary] cpu:1 started (0) 18 [ 0.112089] [bcm2709_secondary_init] enter cpu:1 [ 0.112149] CPU1: update cpu_capacity 1024 [ 0.112157] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.131627] [bcm2709_boot_secondary] cpu:2 started (0) 17 [ 0.131982] [bcm2709_secondary_init] enter cpu:2 [ 0.132015] CPU2: update cpu_capacity 1024 [ 0.132023] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.151674] [bcm2709_boot_secondary] cpu:3 started (0) 16 [ 0.151929] [bcm2709_secondary_init] enter cpu:3 [ 0.151960] CPU3: update cpu_capacity 1024 [ 0.151968] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.152059] Brought up 4 CPUs [ 0.152090] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.152101] CPU: All CPU(s) started in HYP mode. [ 0.152110] CPU: Virtualization extensions available. [ 0.153121] devtmpfs: initialized [ 0.177304] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.177612] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.178731] pinctrl core: initialized pinctrl subsystem [ 0.179524] NET: Registered protocol family 16 [ 0.185434] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.186776] bcm2709.uart_clock = 3000000 [ 0.191987] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.192006] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.192194] Serial: AMBA PL011 UART driver [ 0.192378] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2 [ 0.192934] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.263252] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35 [ 0.263300] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy) [ 0.264003] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver [ 0.264021] bcm2708-dmaengine 3f007000.dma: dma_debug:0 [ 0.264752] SCSI subsystem initialized [ 0.265007] usbcore: registered new interface driver usbfs [ 0.265126] usbcore: registered new interface driver hub [ 0.265277] usbcore: registered new device driver usb [ 0.265987] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-09 18:11 [ 0.293475] Switched to clocksource arch_sys_counter [ 0.345545] FS-Cache: Loaded [ 0.345942] CacheFiles: Loaded [ 0.359187] NET: Registered protocol family 2 [ 0.360601] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.360688] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.360795] TCP: Hash tables configured (established 4096 bind 4096) [ 0.360883] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.360925] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.361244] NET: Registered protocol family 1 [ 0.361742] RPC: Registered named UNIX socket transport module. [ 0.361761] RPC: Registered udp transport module. [ 0.361773] RPC: Registered tcp transport module. [ 0.361784] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.363060] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.364619] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.380595] VFS: Disk quotas dquot_6.6.0 [ 0.381012] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.383668] FS-Cache: Netfs 'nfs' registered for caching [ 0.384892] NFS: Registering the id_resolver key type [ 0.384962] Key type id_resolver registered [ 0.384975] Key type id_legacy registered [ 0.387719] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.387907] io scheduler noop registered [ 0.387930] io scheduler deadline registered (default) [ 0.388269] io scheduler cfq registered [ 0.390758] BCM2708FB: allocated DMA memory de800000 [ 0.390803] BCM2708FB: allocated DMA channel 0 @ f3007000 [ 0.396442] Console: switching to colour frame buffer device 74x28 [ 0.399814] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled [ 0.401076] vc-cma: Videocore CMA driver [ 0.401093] vc-cma: vc_cma_base = 0x00000000 [ 0.401105] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 0.401116] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 0.401347] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 0.417693] brd: module loaded [ 0.426755] loop: module loaded [ 0.427774] vchiq: vchiq_init_state: slot_zero = 0x9e880000, is_master = 0 [ 0.429532] Loading iSCSI transport class v2.0-870. [ 0.430427] usbcore: registered new interface driver smsc95xx [ 0.430507] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.630854] Core Release: 2.80a [ 0.630888] Setting default values for core params [ 0.630938] Finished setting default values for core params [ 0.831355] Using Buffer DMA mode [ 0.831371] Periodic Transfer Interrupt Enhancement - disabled [ 0.831382] Multiprocessor Interrupt Enhancement - disabled [ 0.831394] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.831411] Dedicated Tx FIFOs mode [ 0.831789] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0x9e814000 dma = 0xde814000 len=9024 [ 0.831828] FIQ FSM acceleration enabled for : [ 0.831828] Non-periodic Split Transactions [ 0.831828] Periodic Split Transactions [ 0.831828] High-Speed Isochronous Endpoints [ 0.831852] dwc_otg: Microframe scheduler enabled [ 0.831921] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80415604 [ 0.831942] WARN::hcd_init_fiq:413: FIQ ASM at 0x80415974 length 36 [ 0.831961] WARN::hcd_init_fiq:438: MPHI regs_base at 0x9f89a000 [ 0.832007] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.832057] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.832102] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000 [ 0.832157] Init: Port Power? op_state=1 [ 0.832168] Init: Power Port (0) [ 0.832471] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.832491] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.832508] usb usb1: Product: DWC OTG Controller [ 0.832524] usb usb1: Manufacturer: Linux 4.1.13-v7 dwc_otg_hcd [ 0.832540] usb usb1: SerialNumber: 3f980000.usb [ 0.833574] hub 1-0:1.0: USB hub found [ 0.833644] hub 1-0:1.0: 1 port detected [ 0.834133] dwc_otg: FIQ enabled [ 0.834147] dwc_otg: NAK holdoff enabled [ 0.834158] dwc_otg: FIQ split-transaction FSM enabled [ 0.834197] Module dwc_common_port init [ 0.834583] usbcore: registered new interface driver usb-storage [ 0.834875] mousedev: PS/2 mouse device common for all mice [ 0.835719] bcm2835-cpufreq: min=600000 max=900000 [ 0.838337] sdhci: Secure Digital Host Controller Interface driver [ 0.838346] sdhci: Copyright(c) Pierre Ossman [ 0.838676] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 0.838690] mmc-bcm2835 3f300000.mmc: DMA channels allocated [ 0.873573] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.873982] ledtrig-cpu: registered to indicate activity on CPUs [ 0.874118] hidraw: raw HID events driver (C) Jiri Kosina [ 0.874277] usbcore: registered new interface driver usbhid [ 0.874285] usbhid: USB HID core driver [ 0.874521] Initializing XFRM netlink socket [ 0.874555] NET: Registered protocol family 17 [ 0.874700] Key type dns_resolver registered [ 0.875109] Registering SWP/SWPB emulation handler [ 0.877056] registered taskstats version 1 [ 0.881543] vc-sm: Videocore shared memory driver [ 0.881560] [vc_sm_connected_init]: start [ 0.882105] [vc_sm_connected_init]: end - returning 0 [ 0.887938] Waiting for root device /dev/mmcblk0p7... [ 0.910769] mmc0: host does not support reading read-only switch, assuming write-enable [ 0.912834] mmc0: new high speed SDHC card at address b368 [ 0.913276] mmcblk0: mmc0:b368 USD 3.75 GiB [ 0.917699] mmcblk0: p1 p2 < p5 p6 p7 p8 > [ 0.994423] EXT4-fs (mmcblk0p7): couldn't mount as ext3 due to feature incompatibilities [ 0.995031] EXT4-fs (mmcblk0p7): couldn't mount as ext2 due to feature incompatibilities [ 1.007349] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) [ 1.007402] VFS: Mounted root (ext4 filesystem) readonly on device 179:7. [ 1.012453] devtmpfs: mounted [ 1.012934] Freeing unused kernel memory: 420K (8078d000 - 807f6000) [ 1.033602] Indeed it is in host mode hprt0 = 00021501 [ 1.213567] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.213780] Indeed it is in host mode hprt0 = 00001101 [ 1.413924] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 1.413948] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.414971] hub 1-1:1.0: USB hub found [ 1.415094] hub 1-1:1.0: 5 ports detected [ 1.580800] udevd[99]: starting version 3.1.5 [ 1.614236] random: udevd urandom read with 70 bits of entropy available [ 1.693590] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.788164] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 1.794042] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 1.794076] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.797003] smsc95xx v1.0.4 [ 1.856441] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:76:ee:87 [ 1.933556] usb 1-1.2: new high-speed USB device number 4 using dwc_otg [ 2.035406] usb 1-1.2: New USB device found, idVendor=045b, idProduct=022a [ 2.035435] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.035448] usb 1-1.2: Product: uPD720231A [ 2.035459] usb 1-1.2: Manufacturer: Renesas Electronics [ 2.035472] usb 1-1.2: SerialNumber: 3131313934313331313439302020202020202020 [ 2.036489] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 2.037216] scsi host0: usb-storage 1-1.2:1.0 [ 2.113547] usb 1-1.5: new full-speed USB device number 5 using dwc_otg [ 2.222191] usb 1-1.5: New USB device found, idVendor=054c, idProduct=0268 [ 2.222216] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.222228] usb 1-1.5: Product: PLAYSTATION(R)3 Controller [ 2.222239] usb 1-1.5: Manufacturer: Sony [ 3.034350] scsi 0:0:0:0: Direct-Access SanDisk SSD P4 32GB SSD PQ: 0 ANSI: 6 [ 3.035784] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 3.036530] sd 0:0:0:0: [sda] Write Protect is off [ 3.036556] sd 0:0:0:0: [sda] Mode Sense: 33 00 10 08 [ 3.037217] sd 0:0:0:0: [sda] No Caching mode page found [ 3.037239] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.042362] sda: sda1 [ 3.045681] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.310844] input: Sony PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0001/input/input0 [ 5.313409] sony 0003:054C:0268.0001: input,hiddev0,hidraw0: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0 [ 5.500786] random: nonblocking pool is initialized [ 5.952414] FAT-fs (sda1): utf8 is not a recommended IO cha**et for FAT filesystems, filesystem will be case sensitive! [ 5.965351] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 8.918734] Bluetooth: Core ver 2.20 [ 8.918853] NET: Registered protocol family 31 [ 8.918865] Bluetooth: HCI device and connection manager initialized [ 8.918888] Bluetooth: HCI socket layer initialized [ 8.918904] Bluetooth: L2CAP socket layer initialized [ 8.918940] Bluetooth: SCO socket layer initialized [ 8.996875] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.996902] Bluetooth: BNEP filters: protocol multicast [ 8.996925] Bluetooth: BNEP socket layer initialized [ 11.063689] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 11.063744] Bluetooth: HIDP socket layer initialized [ 13.795655] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 15.455141] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 19.671609] NET: Registered protocol family 10 [ 1274.617313] usb 1-1.5: USB disconnect, device number 5 [ 1303.780980] usb 1-1.5: new full-speed USB device number 6 using dwc_otg [ 1303.888349] usb 1-1.5: New USB device found, idVendor=054c, idProduct=0268 [ 1303.888370] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1303.888382] usb 1-1.5: Product: PLAYSTATION(R)3 Controller [ 1303.888393] usb 1-1.5: Manufacturer: Sony [ 1303.899501] input: Sony PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0002/input/input1 [ 1303.901995] sony 0003:054C:0268.0002: input,hiddev0,hidraw0: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0 # Je continue de chercher....

acris

Bonsoir vraiement étrange.... que tu n arrives pas à configurer les joysticks peux tu poster l archive que va créer cette commande : /recalbox/scripts/recalbox-support.sh à faire via putty en ssh qui sera mise dans un dossier tmp. et l'heberger sur dl.free.fr

strikers94

bonsoir Merci pour ta réactivité... Le fichier est hébergé ici => http://dl.free.fr/mGhbfXNsB Le mot de passe est : recalboxroot Merci pour ton aide... Serge

acris

As tu essayé de désactiver le pilote psx dans recalbox.conf et de reconfigurer ta manette via emulationstation ? j'ai demandé à un dev @subs de regarder tes fichiers. https://github.com/recalbox/recalbox-os/wiki/recalbox.conf-(FR)

# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=1
## Choose an driver beetween official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
controllers.ps3.driver=official

devient

# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=0
## Choose an driver beetween official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
controllers.ps3.driver=official

rebooter apres modification requis winscp avec putty et notepad++ : https://github.com/recalbox/recalbox-os/wiki/acces-via-WinSCP-(FR) ou via recalbox-manager : https://github.com/recalbox/recalbox-os/wiki/recalbox-manager-WEB-interface-(FR)

strikers94

Bonjour, Ok je vais essayer ca ce soir et voir ce qui se passe...... Je vous donne un retour rapide, mais merci pour le coup de main... Serge

Substring

@strikers94 ton joystick envoie des codes non gérés par linux. Alors linux voit ces codes mais ne sait pas trop à quoi ils correspondent. Ensuite pour ton pb de joystick : ca ressemble au pb des triggers qu'on a. Zappe la foncig des sticks, puis une fois que tu dois valider, revient sur les elements non mappés voir si tu peux les réassigner

strikers94

ok pour infos hier soir, lors des différentes manipes, le haut est apparus en bouton 16, jusque la c logique, c'est toujours celui-la, et UNE FOIS la direction gauche est venue au bouton 17... Mais après plus rien, bref je réessaye ce soir toutes ces manipes et vous donne un retour... au pire, j'ai lu sur le forum une personne qui avait un pb équivalent, et au final il à changer le pcb du joy... au pire je ferais de même si ca prend trop la tête... Encore une fois merci pour l'aide Serge

strikers94

re bon jour j'ai pas pu tester les manipes (suis au boulot) mais en cherchant un peut.... sur le net j'ai trouvé ca => https://github.com/xboxdrv/xboxdrv apparement ca serait des drivers alternatifs qui ferait marche le ultra ulia.... désolé je suis pas un as en dev... mais si ca peut faire avancer le schmilblique...

acris

Salut actuellement l encodeur usb de ton stick arcade n envoie pas les bonnes informations avec le pilote psx. Il faut le désactiver comme indiqué dans mon précédent message et surtout rebooter entre les différentes manipulations pour désactiver et activer le pilote. et pourquio pas essayer le driver indiqué dans ton sujet

# ------------ D2 - XBOX Controllers ------------ #
## Xbox controllers are already supported, but xboxdrv can solve some compatibility issues 
## Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)
controllers.xboxdrv.enabled=0
## Set the amount of controllers to use with xboxdrv (0..4)
controllers.xboxdrv.nbcontrols=2

strikers94

Bonsoir Je reviens à la charge Bon j'ai essayé toutes manipes (3 drivers ps3, désactiver drivers ps3 et activé Xbox, et passer tous les boutons et revenir sur le joy... et j'ai bien redémarré entre chaque manipe) Bah peanuts... avec les drivers xbox ca fonctionne pas du tous, avec les ps3 (official et autres) tjs le même soucis avec la direction gauche... bref, je pense me rabattre sur un changement de pcb ...(si bous en avez un a me conseillez ) et vous remercie en tous cas pour votre aide... Vs ferait quand même un dont paypal !!!! parce que franchement, au delà de ce soucis, c quand même du pur bonheur Merci a vous et si vous avez des infos, n'hésitez pas Serge

acris

Bonsoir tu configures bien le dpad ? pour l encodeur usb on te conseillera le xin-mo.

strikers94

Oui oui bien le d-pad pas la croix .... ok pour le pcb, y a moyen que je vous embette encore un peut???? ??? peut vous envoyez une photo de l interieur du joy pour etre sur que ca passera bien avec le nvx pcb .... ? Merci a vs serge

acris

LE D-PAD C est la croix directionnel et c'est ce que tu dois configurer avec ton joystick haut gauche. et passer le joystick analogique

strikers94

Aie ... Suis un ane alors desole... bon bah je reesaye et je vous tiens au courant... Desole

acris

Voici une capture d ecran prise en hazard j ai pas de recalbox sous la main

strikers94

Ouais bah je faisais l autre moi ????? ... desole j essaye demain soir et je vs donne un retour... rohhh la honte quand meme.... Suis confus...

Config joystick ultra ulia eurofp

Want to support us ?

85
Online

96.5k
Users

27.7k
Topics

186.3k
Posts

Config joystick ultra ulia eurofp

Want to support us ?

85Online

96.5kUsers

27.7kTopics

186.3kPosts

85
Online

96.5k
Users

27.7k
Topics

186.3k
Posts