Odroid Go Advance Super - No Wireless - Recalbox 7.2
-
New install of 7.2 does not detect any USB WiFi module. WiFi adapter : TP-Link TL-WN725N. Odroid Go Advance Super.
Have burnt Batocera to spare SD, booted in same Odroid an using same adapter - wireless works fine. Booted into Recalbox 7.2, nothing. Wired Ethernet works fine. Have also tried updating .conf file, and tried using different SSIDs and keys - no luck.
WiFi region is UK/GB. Have tried setting to FR, no change.
Any thoughts? Thanks.
-
@junkptb try wifi.region=JP
do you have an other module to test it ? -
Hi - yes, have tried JP, same issue. Have tried multiple WLAN adapters, same issue :(.
Have been doing a bit of debugging and it looks to be a driver issue. dmesg shows:dmesg |tail -f
[ 1396.842112] usb 1-1.3: SerialNumber: 00E04C0001
[ 1396.843573] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[ 1396.964602] r8188eu 1-1.3:1.0 wlan1: renamed from wlan0
[ 1396.973478] udevd[1213]: renamed network interface wlan0 to wlan1
[ 1397.117191] r8188eu 1-1.3:1.0: Direct firmware load for rtlwifi/rtl8188eufw.bin failed with error -2
[ 1397.117225] r8188eu 1-1.3:1.0: Firmware rtlwifi/rtl8188eufw.bin not available
[ 1397.124569] MAC Address = 0c:82:68:26:c8:e3
[ 1397.150527] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1397.284619] usb 1-1.3: USB disconnect, device number 6
[ 1397.285386] R8188EU: indicate disassocI can't create /rtlwifi to scp the missing .bin file due to the closed nature of the FS.
Any thoughts? Thanks!
-
@Scavy Sorry - just realised I didn't tag you on my response!
-
Hi @junkptb
Looks like wifi firmware are missing.
I'll create an issue for adding them for next bugfix release.Thanks for your report!
David
-
@davidb2111 Hi. Thx for the confirmation. Do we know timelines yet? Seems to be a fairly fundamental omission . Appreciate your response
-
It depends of all know regressions and our ability to fix them asap
-
@junkptb said in Odroid Go Advance Super - No Wireless - Recalbox 7.2:
@davidb2111 Hi. Thx for the confirmation. Do we know timelines yet? Seems to be a fairly fundamental omission . Appreciate your response
It should for the end of this week.
-
If you are enough adventurous, you can flash or update the beta: see here for details: https://forum.recalbox.com/topic/24142/recalbox-7-2-1-beta3-public-release/52?_=1620043776356
David
-
@davidb2111 Hi,
I installed the beta but no WiFi.
I installed via the update file on the SD card -
@subzero666 said in Odroid Go Advance Super - No Wireless - Recalbox 7.2:
@davidb2111 Hi,
I installed the beta but no WiFi.
I installed via the update file on the SD cardwhat's the wifi adapter you use?
-
@davidb2111 I bought the TP Link AC600 (archer T2U Nano)
-
@davidb2111 by the way, the Odroid Go Super USB port is ok since a Bluetooth adapter is recognized et the WiFi adapter works on an Odroid XU4Q running Recalbox 7.2
-
@davidb2111 this morning I installed the final 7.2.1 using the offline method on the Odroid Go Super.
The TP-Link Archer T2U Nano supposedly using the Realtek RTL8811AU chipset doesn't work. Link to Amazon France.
Here are the specs I found about the chipset used in this adapter.
I guess I'll order the fugly official Odroid adapter.
-
@fabriceroux hi,
I ordered the official Odroid wireless adapter. If there's no hurry, I'll be able to tell you if it works on 7.2.1 -
@subzero666 nice of you.
I'll try a couple of USB to RJ45 adapters I have in the office. Then I'll probably go ahead and get the Odroid wireless adapter anyway. Not being able to connect via SMB to work on ROM directories is painful.
-
Hi @subzero666
Personnaly, I use this one flawlessly:
https://www.amazon.fr/gp/product/B07Y8BMNSG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1* -
@davidb2111 thanks I just placed the order for the Cudy WU650S AC on Amazon France. Delivery is scheduled for tonight.
A wiki page with the supported Wi-Fi chipsets might be useful for the Odroid Go users.
-
@davidb2111 I received the Cudy WU650S wi-fi adapter... it works. \o/ Thanks again.
-
@fabriceroux The offical Odroid adapter works fine