[7.0] [x64] Plantage avec GPU RX 570
-
[ 1.588106] ata5: SATA link down (SStatus 0 SControl 330) [ 1.901618] ata6: SATA link down (SStatus 0 SControl 330) [ 1.909107] scsi host9: pata_legacy [ 1.909578] ata11: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 [ 2.074291] libphy: Fixed MDIO Bus: probed [ 2.074752] tun: Universal TUN/TAP device driver, 1.6 [ 2.075283] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.075770] ehci-pci: EHCI PCI platform driver [ 2.076253] ehci-platform: EHCI generic platform driver [ 2.076733] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.077210] ohci-pci: OHCI PCI platform driver [ 2.077695] ohci-platform: OHCI generic platform driver [ 2.078177] uhci_hcd: USB Universal Host Controller Interface driver [ 2.078746] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.079235] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 1 [ 2.135016] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 qu irks 0x0000000000000410 [ 2.135598] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.04 [ 2.136050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 2.136496] usb usb1: Product: xHCI Host Controller [ 2.136935] usb usb1: Manufacturer: Linux 5.4.52 xhci-hcd [ 2.137369] usb usb1: SerialNumber: 0000:01:00.0 [ 2.137874] hub 1-0:1.0: USB hub found [ 2.138341] hub 1-0:1.0: 10 ports detected [ 2.142318] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.142791] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 2 [ 2.143270] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.143827] usb usb2: We don't know the algorithms for LPM for this host, dis abling LPM. [ 2.144275] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 5.04 [ 2.144706] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 2.145133] usb usb2: Product: xHCI Host Controller [ 2.145556] usb usb2: Manufacturer: Linux 5.4.52 xhci-hcd [ 2.145974] usb usb2: SerialNumber: 0000:01:00.0 [ 2.146566] hub 2-0:1.0: USB hub found [ 2.147024] hub 2-0:1.0: 4 ports detected [ 2.149040] xhci_hcd 0000:09:00.3: xHCI Host Controller [ 2.149450] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus numbe r 3 [ 2.149944] xhci_hcd 0000:09:00.3: hcc params 0x0270f665 hci version 0x100 qu irks 0x0000000040000410 [ 2.150440] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.04 [ 2.150853] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 2.151277] usb usb3: Product: xHCI Host Controller [ 2.151722] usb usb3: Manufacturer: Linux 5.4.52 xhci-hcd [ 2.152167] usb usb3: SerialNumber: 0000:09:00.3 [ 2.152718] hub 3-0:1.0: USB hub found [ 2.153120] hub 3-0:1.0: 4 ports detected [ 2.153599] xhci_hcd 0000:09:00.3: xHCI Host Controller [ 2.153985] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus numbe r 4 [ 2.154369] xhci_hcd 0000:09:00.3: Host supports USB 3.0 SuperSpeed [ 2.154751] usb usb4: We don't know the algorithms for LPM for this host, dis abling LPM. [ 2.155144] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 5.04 [ 2.155576] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 2.156004] usb usb4: Product: xHCI Host Controller [ 2.156431] usb usb4: Manufacturer: Linux 5.4.52 xhci-hcd [ 2.156857] usb usb4: SerialNumber: 0000:09:00.3 [ 2.157339] hub 4-0:1.0: USB hub found [ 2.157791] hub 4-0:1.0: 4 ports detected [ 2.158291] usbcore: registered new interface driver cdc_acm [ 2.158670] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters [ 2.159219] usbcore: registered new interface driver uas [ 2.159653] usbcore: registered new interface driver usb-storage [ 2.160080] usbcore: registered new interface driver ums-alauda [ 2.160524] usbcore: registered new interface driver ums-cypress [ 2.160951] usbcore: registered new interface driver ums-datafab [ 2.161320] usbcore: registered new interface driver ums_eneub6250 [ 2.161677] usbcore: registered new interface driver ums-freecom [ 2.162027] usbcore: registered new interface driver ums-isd200 [ 2.162366] usbcore: registered new interface driver ums-jumpshot [ 2.162701] usbcore: registered new interface driver ums-karma [ 2.163032] usbcore: registered new interface driver ums-onetouch [ 2.163385] usbcore: registered new interface driver ums-realtek [ 2.163741] usbcore: registered new interface driver ums-sddr09 [ 2.164096] usbcore: registered new interface driver ums-sddr55 [ 2.164461] usbcore: registered new interface driver ums-usbat [ 2.164836] i8042: PNP: No PS/2 controller found. [ 2.165238] rtc_cmos 00:01: RTC can wake from S4 [ 2.165793] rtc_cmos 00:01: registered as rtc0 [ 2.166104] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpe t irqs [ 2.166406] i2c /dev entries driver [ 2.166997] ledtrig-cpu: registered to indicate activity on CPUs [ 2.167333] EFI Variables Facility v0.08 2004-May-17 [ 2.194418] NET: Registered protocol family 17 [ 2.194785] NET: Registered protocol family 33 [ 2.195123] Key type rxrpc registered [ 2.195452] Key type rxrpc_s registered [ 2.195820] Key type dns_resolver registered [ 2.196739] microcode: CPU0: patch_level=0x08001138 [ 2.197058] microcode: CPU1: patch_level=0x08001138 [ 2.197365] microcode: CPU2: patch_level=0x08001138 [ 2.197676] microcode: CPU3: patch_level=0x08001138 [ 2.198060] microcode: CPU4: patch_level=0x08001138 [ 2.198431] microcode: CPU5: patch_level=0x08001138 [ 2.198794] microcode: CPU6: patch_level=0x08001138 [ 2.199153] microcode: CPU7: patch_level=0x08001138 [ 2.199496] microcode: CPU8: patch_level=0x08001138 [ 2.199794] microcode: CPU9: patch_level=0x08001138 [ 2.200128] microcode: CPU10: patch_level=0x08001138 [ 2.200453] microcode: CPU11: patch_level=0x08001138 [ 2.200786] microcode: Microcode Update Driver: v2.2. [ 2.200788] IPI shorthand broadcast: enabled [ 2.201269] sched_clock: Marking stable (2212020156, -10993888)->(2246391327, -45365059) [ 2.201630] registered taskstats version 1 [ 2.201874] Loading compiled-in X.509 certificates [ 2.202730] Loaded X.509 cert 'Build time autogenerated kernel key: 826c84c26 702261d1b84c8befde52fa33dba52bf' [ 2.203018] zswap: loaded using pool lzo/zbud [ 2.203613] Key type big_key registered [ 2.203971] Key type encrypted registered [ 2.204453] rtc_cmos 00:01: setting system clock to 2020-10-11T09:11:51 UTC ( 1602407511) [ 2.204900] acpi_cpufreq: overriding BIOS provided _PSD data [ 2.206131] Freeing unused kernel image memory: 1728K [ 2.218031] Write protecting the kernel read-only data: 20480k [ 2.218788] Freeing unused kernel image memory: 2016K [ 2.219394] Freeing unused kernel image memory: 1920K [ 2.219685] Run /init as init process [ 2.470937] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 2.478751] usb 3-1: new full-speed USB device number 2 using xhci_hcd [ 2.494726] usb 2-2: New USB device found, idVendor=1058, idProduct=263a, bcd Device=50.06 [ 2.495094] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.495394] usb 2-2: Product: Game Drive [ 2.495695] usb 2-2: Manufacturer: Western Digital [ 2.496010] usb 2-2: SerialNumber: 3550484552455644 [ 2.504237] usb-storage 2-2:1.0: USB Mass Storage device detected [ 2.504783] scsi host9: usb-storage 2-2:1.0 [ 2.551294] EXT4-fs (sdb3): recovery complete [ 2.553123] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 2.565810] /dev/loop0: Can't open blockdev [ 2.568787] random: fast init done [ 2.638789] usb 3-1: New USB device found, idVendor=1131, idProduct=1004, bcd Device= 3.73 [ 2.639154] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.639515] usb 3-1: Product: ISSCEDRBTA [ 2.639877] usb 3-1: Manufacturer: ISSC [ 2.761015] usb 3-2: new full-speed USB device number 3 using xhci_hcd [ 2.867171] udevd[326]: starting version 3.2.9 [ 2.871062] random: udevd: uninitialized urandom read (16 bytes read) [ 2.871667] random: udevd: uninitialized urandom read (16 bytes read) [ 2.872105] random: udevd: uninitialized urandom read (16 bytes read) [ 2.875680] udevd[327]: starting eudev-3.2.9 [ 2.903787] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C 9062910 (first instance was on PNP0C14:00) [ 2.915234] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revisio n 0 [ 2.915773] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port sele ction [ 2.916462] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb2 0 [ 2.917212] ccp 0000:09:00.2: enabling device (0000 -> 0002) [ 2.918892] ccp 0000:09:00.2: ccp enabled [ 2.932400] random: crng init done [ 2.932826] random: 5 urandom warning(s) missed due to ratelimiting [ 2.937573] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 2.938335] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 2.938396] cryptd: max_cpu_qlen set to 1000 [ 2.938959] sp5100-tco sp5100-tco: Watchdog hardware is disabled [ 2.940520] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 2.946794] usb 3-2: New USB device found, idVendor=045e, idProduct=0291, bcd Device= 1.14 [ 2.947641] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.949001] AVX2 version of gcm_enc/dec engaged. [ 2.949822] AES CTR mode by8 optimization enabled [ 2.950496] asus_wmi: ASUS WMI generic driver loaded [ 2.951812] libphy: r8169: probed [ 2.952443] r8169 0000:07:00.0 eth0: RTL8168h/8111h, 40:b0:76:44:d6:52, XID 5 41, IRQ 49 [ 2.952885] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx c hecksumming: ko] [ 2.967527] asus_wmi: Initialization: 0x0 [ 2.968180] asus_wmi: BIOS WMI version: 0.9 [ 2.968851] asus_wmi: SFUN value: 0x0 [ 2.969351] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 2.970293] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/in put2 [ 2.994520] snd_hda_intel 0000:08:00.1: Handle vga_switcheroo audio client [ 2.995157] snd_hda_intel 0000:08:00.1: Force to non-snoop mode [ 2.995860] snd_hda_intel 0000:0a:00.3: enabling device (0000 -> 0002) [ 3.031532] [drm] amdgpu kernel modesetting enabled. [ 3.032040] Parsing CRAT table with 1 nodes [ 3.032469] Ignoring ACPI CRAT on non-APU system [ 3.032899] Virtual CRAT table created for CPU [ 3.033336] Parsing CRAT table with 1 nodes [ 3.033764] Creating topology SYSFS entries [ 3.034195] Topology: Add CPU node [ 3.034606] Finished initializing topology [ 3.035126] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff [ 3.035563] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff [ 3.036005] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfcf00000 -> 0xfcf3ffff [ 3.036447] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 3.036447] fb0: switching to amdgpudrmfb from EFI VGA [ 3.036956] Console: switching to colour dummy device 80x25 [ 3.037000] amdgpu 0000:08:00.0: vgaarb: deactivate vga console [ 3.037258] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x 174B:0x353E 0xEF). [ 3.037272] [drm] register mmio base: 0xFCF00000 [ 3.037274] [drm] register mmio size: 262144 [ 3.037283] [drm] add ip block number 0 <vi_common> [ 3.037285] [drm] add ip block number 1 <gmc_v8_0> [ 3.037287] [drm] add ip block number 2 <tonga_ih> [ 3.037290] [drm] add ip block number 3 <gfx_v8_0> [ 3.037292] [drm] add ip block number 4 <sdma_v3_0> [ 3.037295] [drm] add ip block number 5 <powerplay> [ 3.037298] [drm] add ip block number 6 <dm> [ 3.037300] [drm] add ip block number 7 <uvd_v6_0> [ 3.037303] [drm] add ip block number 8 <vce_v3_0> [ 3.037508] ATOM BIOS: 113-YE353HM-TOE [ 3.037522] [drm] UVD is enabled in VM mode [ 3.037524] [drm] UVD ENC is enabled in VM mode [ 3.037526] [drm] VCE enabled in VM mode [ 3.037549] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 3.039044] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00: 03.1/0000:08:00.1/sound/card0/input3 [ 3.039097] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00: 03.1/0000:08:00.1/sound/card0/input4 [ 3.039139] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00: 03.1/0000:08:00.1/sound/card0/input5 [ 3.039179] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00: 03.1/0000:08:00.1/sound/card0/input6 [ 3.039218] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00 :03.1/0000:08:00.1/sound/card0/input7 [ 3.039256] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00 :03.1/0000:08:00.1/sound/card0/input8 [ 3.040791] amdgpu 0000:08:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5F FFFFFFF (8192M used) [ 3.040795] amdgpu 0000:08:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0F FFFFFF -
[ 3.040805] [drm] Detected VRAM RAM=8192M, BAR=256M [ 3.040808] [drm] RAM width 256bits GDDR5 [ 3.042037] [TTM] Zone kernel: Available graphics memory: 8194952 KiB [ 3.042041] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 3.042044] [TTM] Initializing pool allocator [ 3.042048] [TTM] Initializing DMA pool allocator [ 3.042083] [drm] amdgpu: 8192M of VRAM memory ready [ 3.042087] [drm] amdgpu: 8192M of GTT memory ready. [ 3.042097] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 3.042480] kvm: Nested Virtualization enabled [ 3.042487] kvm: Nested Paging enabled [ 3.042488] SVM: Virtual VMLOAD VMSAVE supported [ 3.042489] SVM: Virtual GIF supported [ 3.043717] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). [ 3.044717] [drm] Chained IB support enabled! [ 3.046867] amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu [ 3.048813] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 3.049785] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 3.053960] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line _outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 3.053965] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0 /0x0/0x0) [ 3.053968] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0 /0x0) [ 3.053971] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 3.053973] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 3.053975] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 3.053977] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 3.053979] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 3.053981] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 3.054970] MCE: In-kernel MCE decoding enabled. [ 3.056888] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.056891] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.056891] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.056891] (Note that use of the override may cause unknown side effects.) [ 3.095258] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00: 08.1/0000:0a:00.3/sound/card1/input9 [ 3.095297] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:0 8.1/0000:0a:00.3/sound/card1/input10 [ 3.095329] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/ 0000:0a:00.3/sound/card1/input11 [ 3.095395] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:0 8.1/0000:0a:00.3/sound/card1/input12 [ 3.095398] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.095399] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.095399] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.095399] (Note that use of the override may cause unknown side effects.) [ 3.095427] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/00 00:00:08.1/0000:0a:00.3/sound/card1/input13 [ 3.099446] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099452] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099455] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099458] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099461] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099464] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099467] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.109379] [drm] DM_PPLIB: values for Engine clock [ 3.109382] [drm] DM_PPLIB: 300000 [ 3.109384] [drm] DM_PPLIB: 466000 [ 3.109385] [drm] DM_PPLIB: 751000 [ 3.109386] [drm] DM_PPLIB: 1019000 [ 3.109387] [drm] DM_PPLIB: 1074000 [ 3.109389] [drm] DM_PPLIB: 1118000 [ 3.109390] [drm] DM_PPLIB: 1119000 [ 3.109391] [drm] DM_PPLIB: 1120000 [ 3.109392] [drm] DM_PPLIB: Validation clocks: [ 3.109394] [drm] DM_PPLIB: engine_max_clock: 112000 [ 3.109395] [drm] DM_PPLIB: memory_max_clock: 210000 [ 3.109396] [drm] DM_PPLIB: level : 8 [ 3.109398] [drm] DM_PPLIB: values for Memory clock [ 3.109400] [drm] DM_PPLIB: 300000 [ 3.109401] [drm] DM_PPLIB: 2100000 [ 3.109402] [drm] DM_PPLIB: Validation clocks: [ 3.109403] [drm] DM_PPLIB: engine_max_clock: 112000 [ 3.109405] [drm] DM_PPLIB: memory_max_clock: 210000 [ 3.109406] [drm] DM_PPLIB: level : 8 [ 3.120677] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.120681] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.120681] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.120681] (Note that use of the override may cause unknown side effects.) [ 3.121060] [drm] Display Core initialized with v3.2.48! [ 3.121175] snd_hda_intel 0000:08:00.1: bound 0000:08:00.0 (ops amdgpu_dm_aud io_component_bind_ops [amdgpu]) [ 3.146706] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.146710] [drm] Driver supports precise vblank timestamp query. [ 3.152429] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.152434] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.152434] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.152434] (Note that use of the override may cause unknown side effects.) [ 3.173492] [drm] UVD and UVD ENC initialized successfully. [ 3.176437] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.176440] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.176440] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.176440] (Note that use of the override may cause unknown side effects.) [ 3.199029] usb 3-3: new full-speed USB device number 4 using xhci_hcd [ 3.205515] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.205518] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.205518] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.205518] (Note that use of the override may cause unknown side effects.) [ 3.228877] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.228880] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.228880] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.228880] (Note that use of the override may cause unknown side effects.) [ 3.264435] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.264438] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.264438] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.264438] (Note that use of the override may cause unknown side effects.) [ 3.274488] [drm] VCE initialized successfully. [ 3.275170] kfd kfd: Allocated 3969056 bytes on gart [ 3.275514] Virtual CRAT table created for GPU [ 3.275516] Parsing CRAT table with 1 nodes [ 3.275521] Creating topology SYSFS entries [ 3.275568] Topology: Add dGPU node [0x67df:0x1002] [ 3.275571] kfd kfd: added device 1002:67df [ 3.280815] [drm] fb mappable at 0xE0830000 [ 3.280818] [drm] vram apper at 0xE0000000 [ 3.280820] [drm] size 33177600 [ 3.280821] [drm] fb depth is 24 [ 3.280823] [drm] pitch is 15360 [ 3.280882] fbcon: amdgpudrmfb (fb0) is primary device [ 3.293513] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.293514] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.293514] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.293514] (Note that use of the override may cause unknown side effects.) [ 3.308689] Console: switching to colour frame buffer device 480x135 [ 3.332473] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.332475] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.332475] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.332475] (Note that use of the override may cause unknown side effects.) [ 3.332854] amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device [ 3.340593] [drm] Initialized amdgpu 3.35.0 20150101 for 0000:08:00.0 on mino r 0 [ 3.349815] usb 3-3: New USB device found, idVendor=045e, idProduct=02ea, bcd Device= 3.01 [ 3.349843] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.349863] usb 3-3: Product: Controller [ 3.349876] usb 3-3: Manufacturer: Microsoft [ 3.349889] usb 3-3: SerialNumber: 3033363030333236383332363430 [ 3.359794] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.359822] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.359822] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.359822] (Note that use of the override may cause unknown side effects.) [ 3.395344] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.395363] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.395363] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.395363] (Note that use of the override may cause unknown side effects.) [ 3.486141] usb 3-4: new low-speed USB device number 5 using xhci_hcd [ 3.541241] scsi 9:0:0:0: Direct-Access WD Game Drive 5006 PQ : 0 ANSI: 6 [ 3.541475] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 3.541639] sd 9:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16 ). [ 3.541765] sd 9:0:0:0: [sdc] 23437770752 512-byte logical blocks: (12.0 TB/1 0.9 TiB) [ 3.541783] sd 9:0:0:0: [sdc] 4096-byte physical blocks [ 3.542679] sd 9:0:0:0: [sdc] Write Protect is off [ 3.542692] sd 9:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 3.543428] sd 9:0:0:0: [sdc] No Caching mode page found [ 3.543441] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 3.576637] sdc: sdc1 [ 3.579192] sd 9:0:0:0: [sdc] Attached SCSI disk [ 3.632883] usb 3-4: New USB device found, idVendor=0e8f, idProduct=2517, bcd Device= 1.00 [ 3.632910] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.672870] hidraw: raw HID events driver (C) Jiri Kosina [ 3.674858] input: Microsoft X-Box One S pad as /devices/pci0000:00/0000:00:0 7.1/0000:09:00.3/usb3/3-3/3-3:1.0/input/input14 [ 3.675018] usbcore: registered new interface driver xpad [ 3.683789] Bluetooth: Core ver 2.22 [ 3.683821] NET: Registered protocol family 31 [ 3.683834] Bluetooth: HCI device and connection manager initialized [ 3.683853] Bluetooth: HCI socket layer initialized [ 3.683868] Bluetooth: L2CAP socket layer initialized [ 3.683883] Bluetooth: SCO socket layer initialized [ 3.689348] usbcore: registered new interface driver btusb [ 3.706994] usbcore: registered new interface driver usbhid [ 3.707024] usbhid: USB HID core driver [ 3.709083] input: HID 0e8f:2517 as /devices/pci0000:00/0000:00:07.1/0000:09: 00.3/usb3/3-4/3-4:1.0/0003:0E8F:2517.0001/input/input15 [ 3.761269] hid-generic 0003:0E8F:2517.0001: input,hidraw0: USB HID v1.10 Key board [HID 0e8f:2517] on usb-0000:09:00.3-4/input0 [ 3.761469] input: HID 0e8f:2517 Consumer Control as /devices/pci0000:00/0000 :00:07.1/0000:09:00.3/usb3/3-4/3-4:1.1/0003:0E8F:2517.0002/input/input16 [ 3.813220] input: HID 0e8f:2517 as /devices/pci0000:00/0000:00:07.1/0000:09: 00.3/usb3/3-4/3-4:1.1/0003:0E8F:2517.0002/input/input17 [ 3.813292] input: HID 0e8f:2517 Mouse as /devices/pci0000:00/0000:00:07.1/00 00:09:00.3/usb3/3-4/3-4:1.1/0003:0E8F:2517.0002/input/input18 [ 3.813363] hid-generic 0003:0E8F:2517.0002: input,hidraw1: USB HID v1.10 Mou se [HID 0e8f:2517] on usb-0000:09:00.3-4/input1 [ 3.816503] mousedev: PS/2 mouse device common for all mice [ 4.461658] 8021q: 802.1Q VLAN Support v1.8 [ 4.480896] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase [ 4.482294] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.494069] Generic FE-GE Realtek PHY r8169-700:00: attached PHY driver [Gene ric FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE) [ 4.584221] r8169 0000:07:00.0 eth0: Link is Down [ 5.169362] snd_hda_intel 0000:08:00.1: IRQ timing workaround is activated fo r card #0. Suggest a bigger bdl_pos_adj. [ 6.783574] squashfs: Unknown parameter 'fmask' [ 6.783787] FAT-fs (sda2): utf8 is not a recommended IO cha**et for FAT files ystems, filesystem will be case sensitive! [ 6.786785] FAT-fs (sda2): Volume was not properly unmounted. Some data may b e corrupt. Please run fsck. [ 7.362203] squashfs: Unknown parameter 'fmask' [ 7.362627] fuseblk: Unknown parameter 'fmask' [ 7.808785] r8169 0000:07:00.0 eth0: Link is Up - 1Gbps/Full - flow control r x/tx [ 8.430860] NET: Registered protocol family 10 [ 8.431187] Segment Routing with IPv6 [ 10.627364] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.627366] Bluetooth: BNEP filters: protocol multicast [ 10.627370] Bluetooth: BNEP socket layer initialized [ 10.634365] NET: Registered protocol family 38 -
J'ai dû le faire en quatre parties car il y avait trop de caractères pour un seul message !
-
Merci pour le log
Bon, à moins d'avoir du c... das les yeux, j'vois rien d'erratique...
On continue de chercher...
-
Si tu arrives à partager une archive de support, je prends aussi
-
Bonsoir @Beho , @davidb2111 ,
J'ai le plaisir de vous annoncer avoir fini par trouver une solution, j'ai tout d'abord tenté de lancer le système sur plusieurs pc avec IGP de la gamme Ryzen (je n'ai pas encore essayé sur mon athlon AM4) ou GPU dédié RX 5XX et le constat était le même.
J'ai tenté plusieurs flashs différents sur plusieurs support, sans succès.
J'ai ensuite mis à jour le système sur chacune des versions correctives mais sans succès non plus.Enfin j'ai tenté d'abandonner balena etcher au profit de raspberry pi imager et là plus de problème avec mes machines AMD !
Victoire ! [Imaginez une fanfare de Final Fantasy ici]
Config x64 : Ryzen 1600X, RAM 16 Go, RX570 8Go
-
@Nelzebym super c'est vrai que j'ai eu le même problème avec etcher sur la 7.0... mais pas les mêmes symptômes moi j'avais ecran noir. Du coup je suis passé par Rufus. @acris je pense qu'il faudrait arrêter de conseiller etcher pour créer l'image de Recalbox il y a de plus en plus de problèmes avec je trouve (proposition avec ton mon respect bien sûr !!!
) -
-
Dans les derniers tutos sur youtube de la chaine officielle ça parle encore de balena etcher, mais en effet je suis passé complètement à côté de l'information sur le site !
-
@Nelzebym
on a pas refait non plus toutes les vidéos, c'est aussi à l utilisateur de se renseigner un minium et de lire les informations sur les pages
on a vu que plus etcher faisait des mises à jour de leur coté plus le flashage devenait merdique.
On a agi en conséquence, pour indiquant partout de ne plus flasher avec etcher mais raspberry pi imager dont recalbox a été intégré il y a peu aussi.
tu installes raspberry pi imager, tu cherches recalbox dans la liste et voila. -
@acris ou super je n'avais pas vu. Vous êtes top !
-
J'oubliais le plus important, merci à tous pour votre aide
