7 Oct 2020, 19:22
Dans vos PC, avez-vous des cartes intel en plus d'une AMD et nVidia.
De plus, il me faudrait une archive support (cf l'aide dispo ici https://forum.recalbox.com/topic/4054/a-lire-avant-de-poster-merci)
David
[7.0] [x64] Plantage avec GPU RX 570
-
Bonjour GT610 OU GT610M @Beho ?
et là le problème est geforce donc pas la meme chosecar là il etait question de cartes graphiques AMD RX 570
merci de ne pas squatter le sujet de l utilisateur principal afin que nous puisses traiter au mieux le problème, créer votre propre sujet.
-
@acris Pardon tu as raison je suis un squateur... Pour ma part c'est une gt610 (pc fixe). Je voulais juste dire que j'avais la même chose et qu'on c'était occupé de moi sur Discord...
Bon courage au support... -
@Nelzebym Salut j'ai réussi à résoudre le même problème que toi en laissant Belena Etcher décompresser l'ISO de RB7. En gros tu télécharges, et sans toucher au fichier tu fais ton install. J'espère que ça marchera pour toi, moi tout roule depuis.
PC Intel Q9650 4 go de ram Geforce GTX 670 2Go
Kit borne arcade de chez Fabrikaborne et déco maison
Kit 2 joueurs Joysticks + boutons lumineux EG Starts (Amazon) et 2 manettes Xbox One
Ecran 22p 16/9 full hd
Recalbox 7.1.1 x64 -
@Beho said in [7.0] [x64] Plantage avec GPU RX 570:
@Nelzebym Salut j'ai réussi à résoudre le même problème que toi en laissant Belena Etcher décompresser l'ISO de RB7. En gros tu télécharges, et sans toucher au fichier tu fais ton install. J'espère que ça marchera pour toi, moi tout roule depuis.
Je vais essayer, peut-être que cela pourrait fonctionner
-
@Beho En essayant et en te relisant je me suis aperçu que j'avais déjà procédé de la sorte pour l'installation !
Config x64 : Ryzen 1600X, RAM 16 Go, RX570 8Go
-
@Nelzebym ah ok dommage j'aurais aimé pouvoir t'aider...
-
@Beho T'en fais pas, c'est déjà sympa de vouloir aider même si ça n'aboutit pas à une solution
-
Dans vos PC, avez-vous des cartes intel en plus d'une AMD et nVidia.
De plus, il me faudrait une archive support (cf l'aide dispo ici https://forum.recalbox.com/topic/4054/a-lire-avant-de-poster-merci)David
-
@davidb2111 Salut. Pour ma part c'est bon ça fonctionne maintenant. J'ai juste un problème de manette sur Gamecube et la Psp qui ne fonctionne plus. Et pas de Intel intégré que du Nvidia. Merci
-
@davidb2111 said in [7.0] [x64] Plantage avec GPU RX 570:
Dans vos PC, avez-vous des cartes intel en plus d'une AMD et nVidia.
De plus, il me faudrait une archive support (cf l'aide dispo ici https://forum.recalbox.com/topic/4054/a-lire-avant-de-poster-merci)David
Salutations maître développeur,
Pas de carte graphique intel, je tourne sur une plateforme sous AMD Ryzen !
J'aurais aimé créer une archive support mais lorsque je rencontre le problème ça ne fonctionne pas, je vais quand même réessayer dés que j'aurais fini mon transfert, dans encore 3 à 4 heures pour le coup -
Salut @Nelzebym
Je comprends
Je vais essayer de trouver une bonne âme dans nos beta-testeurs avec du ryzen.
Je te tiens au courant.David.
Ps: merci pour la précision sur l'intel
-
@davidb2111 Si besoin je peux peut-être apporter mon aide et ce même si mes compétences sont limitées
Je ne sais pas si tu as vu mais j'avais posté des logs du fichier /var/log/Worg.0.log un peu plus haut, des fois que cela puisse aider !
Par ailleurs je vais tenter de voir ce que ça donne sur mes autres ordinateurs, j'ai plusieurs configs avec CPU et GPU (dédié et IGP) AMD.
-
Ouais, super!
Il faudrait faire la commande
dmesget renvoyer le résultat.David
-
@davidb2111 Voila le résultat de la commande dmesg :
[ 0.000000] Linux version 5.4.52 (root@94c1c75e4166) (gcc version 7.5.0 (Buil droot 2020.02.4-dirty)) #1 SMP PREEMPT Fri Oct 2 10:11:32 CEST 2020 [ 0.000000] Command line: BOOT_IMAGE=/boot/linux label=RECALBOX console=tty1 loglevel=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point regi sters' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009e0ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009e10000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000d1474fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d1475000-0x00000000d1492fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d1493000-0x00000000da3d4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da3d5000-0x00000000da512fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da513000-0x00000000da520fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da521000-0x00000000da628fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da629000-0x00000000da9e9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da9ea000-0x00000000db7b8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db7b9000-0x00000000ddffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.60 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xd1475000 ACPI=0xd1475000 SMBIOS=0xdb685000 SM BIOS 3.0=0xdb684000 ESRT=0xd7c77f18 MEMATTR=0xd73f0018 [ 0.000000] SMBIOS 3.1.1 present. [ 0.000000] DMI: System manufacturer System Product Name/PRIME B450M-K, BIOS 1814 08/21/2019 [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x41f380 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000420000000 aka 16896M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xde000 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000d7c77f18 to 0x00000000d 7c77f50. [ 0.000000] e820: update [mem 0xd7c77000-0xd7c77fff] usable ==> reserved [ 0.000000] check: Scanning 1 areas for low memory corruption [ 0.000000] Using GB pages for direct mapping [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x37e74000-0x37f31fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000D1475000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000D14750A0 0000BC (v01 ALASKA A M I 0107200 9 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000D1480538 000114 (v06 ALASKA A M I 0107200 9 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000D14751F8 00B340 (v02 ALASKA A M I 0107200 9 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DA9D1D80 000040 [ 0.000000] ACPI: APIC 0x00000000D1480650 00015E (v03 ALASKA A M I 0107200 9 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000D14807B0 000044 (v01 ALASKA A M I 0107200 9 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000D14807F8 00009C (v01 ALASKA A M I 0107200 9 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000D1480898 0000C8 (v02 ALASKA CPUSSDT 0107200 9 AMI 01072009) [ 0.000000] ACPI: SSDT 0x00000000D1490FB0 0010AF (v01 AMD AmdTable 0000000 1 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000D14809B8 008C98 (v02 AMD AMD ALIB 0000000 2 MSFT 04000000) [ 0.000000] ACPI: SSDT 0x00000000D1489650 003301 (v01 AMD AMD AOD 0000000 1 INTL 20120913) [ 0.000000] ACPI: MCFG 0x00000000D148C958 00003C (v01 ALASKA A M I 0107200 9 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000D148C998 000038 (v01 ALASKA A M I 0107200 9 AMI 00000005) [ 0.000000] ACPI: SSDT 0x00000000D148C9D0 000024 (v01 AMDFCH FCHZP 0000100 0 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000D148C9F8 000042 (v01 0000000 0 00000000) [ 0.000000] ACPI: BGRT 0x00000000D148CA40 000038 (v01 ALASKA A M I 0107200 9 AMI 00010013) [ 0.000000] ACPI: IVRS 0x00000000D148CA78 0000D0 (v02 AMD AMD IVRS 0000000 1 AMD 00000000) [ 0.000000] ACPI: SSDT 0x00000000D148CB48 001A58 (v01 AMD AMD CPU 0000000 1 AMD 00000001) [ 0.000000] ACPI: CRAT 0x00000000D148E5A0 000BD0 (v01 AMD AMD CRAT 0000000 1 AMD 00000001) [ 0.000000] ACPI: CDIT 0x00000000D148F170 000029 (v01 AMD AMD CDIT 0000000 1 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000D148F1A0 001D4A (v01 AMD AmdTable 0000000 1 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000D1490EF0 0000BF (v01 AMD AMD PT 0000100 0 INTL 20120913) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] system APIC only can use physical flat [ 0.000000] Setting APIC routing to physical flat. [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000041f37ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009e0ffff] [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.000000] node 0: [mem 0x000000000a20b000-0x000000000affffff] [ 0.000000] node 0: [mem 0x000000000b020000-0x00000000d1474fff] [ 0.000000] node 0: [mem 0x00000000d1493000-0x00000000da3d4fff] [ 0.000000] node 0: [mem 0x00000000da521000-0x00000000da628fff] [ 0.000000] node 0: [mem 0x00000000db7b9000-0x00000000ddffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f37ffff] [ 0.000000] Zeroed struct page in unavailable ranges: 16886 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff] [ 0.000000] On node 0 totalpages: 4177418 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 27 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14060 pages used for memmap [ 0.000000] DMA32 zone: 899819 pages, LIFO batch:63 [ 0.000000] Normal zone: 51150 pages used for memmap [ 0.000000] Normal zone: 3273600 pages, LIFO batch:63 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] system APIC only can use physical flat [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] e820: update [mem 0xd6dd9000-0xd6eccfff] usable ==> reserved [ 0.000000] smpboot: Allowing 32 CPUs, 20 hotplug CPUs [ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff ffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_no de_ids:1 [ 0.000000] percpu: Embedded 53 pages/cpu s177624 r8192 d31272 u262144 [ 0.000000] pcpu-alloc: s177624 r8192 d31272 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4112117 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/linux label=RECALBOX consol e=tty1 loglevel=7 [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 byt es, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes , linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16239004K/16709672K available (12291K kernel code, 1581K rwdata, 4224K rodata, 1728K init, 2972K bss, 470668K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 0.000000] ftrace: allocating 40525 entries in 159 pages [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 ji ffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.000000] NR_IRQS: 16640, nr_irqs: 1224, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x32f/0x516 wit h crng_init=0 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] printk: console [tty1] enabled [ 0.000000] ACPI: Core revision 20190816 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 133484873504 ns [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.003000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.011000] tsc: Unable to calibrate against PIT [ 0.011000] tsc: using HPET reference calibration [ 0.011000] tsc: Detected 3592.743 MHz processor [ 0.000003] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33 c98c2a3c5, max_idle_ns: 440795318697 ns [ 0.000007] Calibrating delay loop (skipped), value calculated using timer fr equency.. 7185.48 BogoMIPS (lpj=3592743) [ 0.000010] pid_max: default: 32768 minimum: 301 [ 0.001850] LSM: Security Framework initializing [ 0.001854] Yama: becoming mindful. [ 0.001905] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, li near) [ 0.001929] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 byte s, linear) [ 0.002137] LVT offset 1 assigned for vector 0xf9 [ 0.002197] LVT offset 2 assigned for vector 0xf4 [ 0.002213] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.002215] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.002218] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user poin ter sanitization [ 0.002221] Spectre V2 : Mitigation: Full AMD retpoline [ 0.002223] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on c ontext switch [ 0.002225] Spectre V2 : mitigation: Enabling conditional Indirect Branch Pre diction Barrier [ 0.002228] Spectre V2 : User space: Vulnerable [ 0.002229] Speculative Store Bypass: Mitigation: Speculative Store Bypass di sabled via prctl and seccomp [ 0.002413] Freeing SMP alternatives memory: 32K [ 0.105877] smpboot: CPU0: AMD Ryzen 5 1600X Six-Core Processor (family: 0x17 , model: 0x1, stepping: 0x1) [ 0.111016] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.111024] ... version: 0 [ 0.111026] ... bit width: 48 [ 0.111027] ... generic registers: 6 [ 0.111029] ... value mask: 0000ffffffffffff [ 0.111031] ... max period: 00007fffffffffff [ 0.111032] ... fixed-purpose events: 0 [ 0.111034] ... event mask: 000000000000003f [ 0.113010] rcu: Hierarchical SRCU implementation. [ 0.117010] smp: Bringing up secondary CPUs ... [ 0.125028] x86: Booting SMP configuration: [ 0.125033] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #1 0 #11 [ 0.216066] smp: Brought up 1 node, 12 CPUs [ 0.216073] smpboot: Max logical packages: 3 [ 0.216075] smpboot: Total of 12 processors activated (86225.83 BogoMIPS) [ 0.217434] devtmpfs: initialized [ 0.217434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 1911260446275000 ns [ 0.217434] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.218034] pinctrl core: initialized pinctrl subsystem [ 0.218154] NET: Registered protocol family 16 [ 0.218209] audit: initializing netlink subsys (disabled) [ 0.218216] audit: type=2000 audit(1602407509.229:1): state=initialized audit _enabled=0 res=1 [ 0.218216] cpuidle: using governor ladder [ 0.218216] cpuidle: using governor menu [ 0.218216] ACPI: bus type PCI registered [ 0.218216] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.218216] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfb ffffff] (base 0xf8000000) [ 0.218216] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.218216] PCI: Using configuration type 1 for base access [ 0.219524] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.219524] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.220078] ACPI: Added _OSI(Module Device) [ 0.220080] ACPI: Added _OSI(Processor Device) [ 0.220082] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.220083] ACPI: Added _OSI(Processor Aggregator Device) [ 0.220085] ACPI: Added _OSI(Linux-Dell-Video) [ 0.220087] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.220088] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.227463] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.228431] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.230432] ACPI: Interpreter enabled [ 0.230438] ACPI: (supports S0 S5) [ 0.230439] ACPI: Using IOAPIC for interrupt routing [ 0.230689] PCI: Using host bridge windows from ACPI; if necessary, use "pci= nocrs" and report a bug [ 0.230968] ACPI: Enabled 3 GPEs in block 00 to 1F [ 0.237525] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.237531] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S egments MSI HPX-Type3] [ 0.237636] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.237734] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeC apability] [ 0.237744] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 0 0-3f] only partially covers this bridge [ 0.237946] PCI host bridge to bus 0000:00 [ 0.237949] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.237951] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.237953] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.237956] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.237958] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win dow] [ 0.237961] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff win dow] [ 0.237964] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff win dow] [ 0.237966] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff win dow] [ 0.237969] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.237977] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 [ 0.238061] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 [ 0.238154] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.238212] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 [ 0.238251] pci 0000:00:01.3: enabling Extended Tags [ 0.238331] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 0.238432] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 [ 0.238501] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 [ 0.238555] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 [ 0.238669] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.238776] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 [ 0.238850] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 [ 0.238904] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 [ 0.238937] pci 0000:00:07.1: enabling Extended Tags [ 0.239017] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.239124] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.239179] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 [ 0.239216] pci 0000:00:08.1: enabling Extended Tags [ 0.239294] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.239430] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.239640] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.239854] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 [ 0.239897] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 [ 0.239940] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 [ 0.239986] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 [ 0.240044] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 [ 0.240091] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 [ 0.240138] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 [ 0.240180] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 [ 0.240305] pci 0000:01:00.0: [1022:43d5] type 00 class 0x0c0330 [ 0.240328] pci 0000:01:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit] [ 0.240363] pci 0000:01:00.0: enabling Extended Tags [ 0.240408] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.240475] pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601 [ 0.240520] pci 0000:01:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff] [ 0.240528] pci 0000:01:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref] [ 0.240534] pci 0000:01:00.1: enabling Extended Tags [ 0.240570] pci 0000:01:00.1: PME# supported from D3hot D3cold [ 0.240624] pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400 [ 0.240666] pci 0000:01:00.2: enabling Extended Tags [ 0.240706] pci 0000:01:00.2: PME# supported from D3hot D3cold [ 0.240787] pci 0000:00:01.3: PCI bridge to [bus 01-07] [ 0.240791] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] [ 0.240794] pci 0000:00:01.3: bridge window [mem 0xfcc00000-0xfcdfffff] [ 0.240864] pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400 [ 0.240911] pci 0000:02:00.0: enabling Extended Tags [ 0.240961] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.241034] pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400 [ 0.241083] pci 0000:02:04.0: enabling Extended Tags [ 0.241135] pci 0000:02:04.0: PME# supported from D3hot D3cold [ 0.241202] pci 0000:02:05.0: [1022:43c7] type 01 class 0x060400 [ 0.241249] pci 0000:02:05.0: enabling Extended Tags [ 0.241298] pci 0000:02:05.0: PME# supported from D3hot D3cold [ 0.241366] pci 0000:02:06.0: [1022:43c7] type 01 class 0x060400 [ 0.241412] pci 0000:02:06.0: enabling Extended Tags [ 0.241461] pci 0000:02:06.0: PME# supported from D3hot D3cold [ 0.241529] pci 0000:02:07.0: [1022:43c7] type 01 class 0x060400 [ 0.241575] pci 0000:02:07.0: enabling Extended Tags [ 0.241624] pci 0000:02:07.0: PME# supported from D3hot D3cold [ 0.241704] pci 0000:01:00.2: PCI bridge to [bus 02-07] [ 0.241709] pci 0000:01:00.2: bridge window [io 0xf000-0xffff] [ 0.241713] pci 0000:01:00.2: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.241746] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.241789] pci 0000:02:04.0: PCI bridge to [bus 04] [ 0.241828] pci 0000:02:05.0: PCI bridge to [bus 05] [ 0.241871] pci 0000:02:06.0: PCI bridge to [bus 06] [ 0.241933] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 0.241975] pci 0000:07:00.0: reg 0x10: [io 0xf000-0xf0ff] [ 0.242011] pci 0000:07:00.0: reg 0x18: [mem 0xfcc04000-0xfcc04fff 64bit] [ 0.242035] pci 0000:07:00.0: reg 0x20: [mem 0xfcc00000-0xfcc03fff 64bit] -
[ 0.242172] pci 0000:07:00.0: supports D1 D2 [ 0.242173] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242337] pci 0000:02:07.0: PCI bridge to [bus 07] [ 0.242342] pci 0000:02:07.0: bridge window [io 0xf000-0xffff] [ 0.242346] pci 0000:02:07.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.242433] pci 0000:08:00.0: [1002:67df] type 00 class 0x030000 [ 0.242456] pci 0000:08:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref ] [ 0.242466] pci 0000:08:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref ] [ 0.242473] pci 0000:08:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.242480] pci 0000:08:00.0: reg 0x24: [mem 0xfcf00000-0xfcf3ffff] [ 0.242486] pci 0000:08:00.0: reg 0x30: [mem 0xfcf40000-0xfcf5ffff pref] [ 0.242498] pci 0000:08:00.0: BAR 0: assigned to efifb [ 0.242547] pci 0000:08:00.0: supports D1 D2 [ 0.242549] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.242626] pci 0000:08:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.242645] pci 0000:08:00.1: reg 0x10: [mem 0xfcf60000-0xfcf63fff 64bit] [ 0.242710] pci 0000:08:00.1: supports D1 D2 [ 0.242780] pci 0000:00:03.1: PCI bridge to [bus 08] [ 0.242784] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ 0.242786] pci 0000:00:03.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.242790] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bi t pref] [ 0.242853] pci 0000:09:00.0: [1022:145a] type 00 class 0x130000 [ 0.242879] pci 0000:09:00.0: enabling Extended Tags [ 0.242939] pci 0000:09:00.2: [1022:1456] type 00 class 0x108000 [ 0.242954] pci 0000:09:00.2: reg 0x18: [mem 0xfca00000-0xfcafffff] [ 0.242962] pci 0000:09:00.2: reg 0x24: [mem 0xfcb00000-0xfcb01fff] [ 0.242969] pci 0000:09:00.2: enabling Extended Tags [ 0.243047] pci 0000:09:00.3: [1022:145c] type 00 class 0x0c0330 [ 0.243061] pci 0000:09:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit] [ 0.243081] pci 0000:09:00.3: enabling Extended Tags [ 0.243109] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold [ 0.243163] pci 0000:00:07.1: PCI bridge to [bus 09] [ 0.243168] pci 0000:00:07.1: bridge window [mem 0xfc900000-0xfcbfffff] [ 0.243238] pci 0000:0a:00.0: [1022:1455] type 00 class 0x130000 [ 0.243265] pci 0000:0a:00.0: enabling Extended Tags [ 0.243330] pci 0000:0a:00.2: [1022:7901] type 00 class 0x010601 [ 0.243358] pci 0000:0a:00.2: reg 0x24: [mem 0xfce08000-0xfce08fff] [ 0.243366] pci 0000:0a:00.2: enabling Extended Tags [ 0.243395] pci 0000:0a:00.2: PME# supported from D3hot D3cold [ 0.243442] pci 0000:0a:00.3: [1022:1457] type 00 class 0x040300 [ 0.243453] pci 0000:0a:00.3: reg 0x10: [mem 0xfce00000-0xfce07fff] [ 0.243472] pci 0000:0a:00.3: enabling Extended Tags [ 0.243500] pci 0000:0a:00.3: PME# supported from D0 D3hot D3cold [ 0.243556] pci 0000:00:08.1: PCI bridge to [bus 0a] [ 0.243561] pci 0000:00:08.1: bridge window [mem 0xfce00000-0xfcefffff] [ 0.243806] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.243849] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.243885] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.243930] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.243971] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.244010] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.244047] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.244083] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.244456] iommu: Default domain type: Translated [ 0.244456] pci 0000:08:00.0: vgaarb: setting as boot VGA device [ 0.244456] pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=i o+mem,locks=none [ 0.244456] pci 0000:08:00.0: vgaarb: bridge control possible [ 0.244456] vgaarb: loaded [ 0.244456] SCSI subsystem initialized [ 0.244456] libata version 3.00 loaded. [ 0.244456] ACPI: bus type USB registered [ 0.244456] usbcore: registered new interface driver usbfs [ 0.244456] usbcore: registered new interface driver hub [ 0.244456] usbcore: registered new device driver usb [ 0.244456] EDAC MC: Ver: 3.0.0 [ 0.244456] Registered efivars operations [ 0.245036] PCI: Using ACPI for IRQ routing [ 0.249289] PCI: pci_cache_line_size set to 64 bytes [ 0.249342] e820: reserve RAM buffer [mem 0x09e10000-0x0bffffff] [ 0.249343] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.249344] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.249344] e820: reserve RAM buffer [mem 0xd1475000-0xd3ffffff] [ 0.249345] e820: reserve RAM buffer [mem 0xd6dd9000-0xd7ffffff] [ 0.249345] e820: reserve RAM buffer [mem 0xd7c77000-0xd7ffffff] [ 0.249346] e820: reserve RAM buffer [mem 0xda3d5000-0xdbffffff] [ 0.249347] e820: reserve RAM buffer [mem 0xda629000-0xdbffffff] [ 0.249347] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff] [ 0.249348] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff] [ 0.249410] NetLabel: Initializing [ 0.249412] NetLabel: domain hash size = 128 [ 0.249413] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.249422] NetLabel: unlabeled traffic allowed by default [ 0.249432] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.249432] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.251038] clocksource: Switched to clocksource tsc-early [ 0.262456] VFS: Disk quotas dquot_6.6.0 [ 0.262474] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.262532] pnp: PnP ACPI init [ 0.262637] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.262642] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.262697] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.262799] system 00:02: [io 0x0300-0x030f] has been reserved [ 0.262802] system 00:02: [io 0x0230-0x023f] has been reserved [ 0.262805] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.262808] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.262992] pnp 00:03: [dma 0 disabled] [ 0.263018] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.263150] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.263153] system 00:04: [io 0x040b] has been reserved [ 0.263155] system 00:04: [io 0x04d6] has been reserved [ 0.263157] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.263159] system 00:04: [io 0x0c14] has been reserved [ 0.263161] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.263163] system 00:04: [io 0x0c52] has been reserved [ 0.263165] system 00:04: [io 0x0c6c] has been reserved [ 0.263167] system 00:04: [io 0x0c6f] has been reserved [ 0.263169] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.263171] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.263173] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.263175] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.263177] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.263179] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.263181] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.263183] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.263185] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.263187] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.263190] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.263192] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.263195] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.263197] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.263199] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.263201] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.263204] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.263207] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.263489] pnp: PnP ACPI: found 5 devices [ 0.264679] thermal_sys: Registered thermal governor 'fair_share' [ 0.264679] thermal_sys: Registered thermal governor 'bang_bang' [ 0.264682] thermal_sys: Registered thermal governor 'step_wise' [ 0.264685] thermal_sys: Registered thermal governor 'user_space' [ 0.264687] thermal_sys: Registered thermal governor 'power_allocator' [ 0.269239] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id le_ns: 2085701024 ns [ 0.269272] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.269284] pci 0000:02:04.0: PCI bridge to [bus 04] [ 0.269294] pci 0000:02:05.0: PCI bridge to [bus 05] [ 0.269303] pci 0000:02:06.0: PCI bridge to [bus 06] [ 0.269313] pci 0000:02:07.0: PCI bridge to [bus 07] [ 0.269317] pci 0000:02:07.0: bridge window [io 0xf000-0xffff] [ 0.269321] pci 0000:02:07.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.269328] pci 0000:01:00.2: PCI bridge to [bus 02-07] [ 0.269331] pci 0000:01:00.2: bridge window [io 0xf000-0xffff] [ 0.269336] pci 0000:01:00.2: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.269343] pci 0000:00:01.3: PCI bridge to [bus 01-07] [ 0.269345] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] [ 0.269348] pci 0000:00:01.3: bridge window [mem 0xfcc00000-0xfcdfffff] [ 0.269353] pci 0000:00:03.1: PCI bridge to [bus 08] [ 0.269356] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ 0.269359] pci 0000:00:03.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.269362] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bi t pref] [ 0.269366] pci 0000:00:07.1: PCI bridge to [bus 09] [ 0.269369] pci 0000:00:07.1: bridge window [mem 0xfc900000-0xfcbfffff] [ 0.269374] pci 0000:00:08.1: PCI bridge to [bus 0a] [ 0.269377] pci 0000:00:08.1: bridge window [mem 0xfce00000-0xfcefffff] [ 0.269383] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.269385] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.269387] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.269389] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.269391] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.269393] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.269395] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.269397] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.269400] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.269402] pci_bus 0000:01: resource 1 [mem 0xfcc00000-0xfcdfffff] [ 0.269404] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] [ 0.269406] pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfccfffff] [ 0.269408] pci_bus 0000:07: resource 0 [io 0xf000-0xffff] [ 0.269410] pci_bus 0000:07: resource 1 [mem 0xfcc00000-0xfccfffff] [ 0.269412] pci_bus 0000:08: resource 0 [io 0xe000-0xefff] [ 0.269413] pci_bus 0000:08: resource 1 [mem 0xfcf00000-0xfcffffff] [ 0.269415] pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref ] [ 0.269418] pci_bus 0000:09: resource 1 [mem 0xfc900000-0xfcbfffff] [ 0.269420] pci_bus 0000:0a: resource 1 [mem 0xfce00000-0xfcefffff] [ 0.269472] NET: Registered protocol family 2 [ 0.269583] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 1310 72 bytes, linear) [ 0.269603] TCP established hash table entries: 131072 (order: 8, 1048576 byt es, linear) [ 0.269755] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, line ar) [ 0.269884] TCP: Hash tables configured (established 131072 bind 65536) [ 0.269920] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.269952] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear ) [ 0.270028] NET: Registered protocol family 1 [ 0.270167] pci 0000:08:00.0: Video device with shadowed ROM at [mem 0x000c00 00-0x000dffff] [ 0.270175] pci 0000:08:00.1: D0 power state depends on 0000:08:00.0 [ 0.270294] PCI: CLS 64 bytes, default 64 [ 0.270322] Trying to unpack rootfs image as initramfs... [ 0.278891] Freeing initrd memory: 760K [ 0.278905] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.279181] pci 0000:00:01.0: Adding to iommu group 0 [ 0.279343] pci 0000:00:01.3: Adding to iommu group 1 [ 0.279490] pci 0000:00:02.0: Adding to iommu group 2 [ 0.279654] pci 0000:00:03.0: Adding to iommu group 3 [ 0.279796] pci 0000:00:03.1: Adding to iommu group 4 [ 0.279951] pci 0000:00:04.0: Adding to iommu group 5 [ 0.280097] pci 0000:00:07.0: Adding to iommu group 6 [ 0.280267] pci 0000:00:07.1: Adding to iommu group 7 [ 0.280413] pci 0000:00:08.0: Adding to iommu group 8 [ 0.280577] pci 0000:00:08.1: Adding to iommu group 9 [ 0.280738] pci 0000:00:14.0: Adding to iommu group 10 [ 0.280753] pci 0000:00:14.3: Adding to iommu group 10 [ 0.280934] pci 0000:00:18.0: Adding to iommu group 11 [ 0.280951] pci 0000:00:18.1: Adding to iommu group 11 [ 0.280965] pci 0000:00:18.2: Adding to iommu group 11 [ 0.280977] pci 0000:00:18.3: Adding to iommu group 11 [ 0.280992] pci 0000:00:18.4: Adding to iommu group 11 [ 0.281006] pci 0000:00:18.5: Adding to iommu group 11 [ 0.281022] pci 0000:00:18.6: Adding to iommu group 11 [ 0.281035] pci 0000:00:18.7: Adding to iommu group 11 [ 0.281198] pci 0000:01:00.0: Adding to iommu group 12 [ 0.281221] pci 0000:01:00.1: Adding to iommu group 12 [ 0.281244] pci 0000:01:00.2: Adding to iommu group 12 [ 0.281257] pci 0000:02:00.0: Adding to iommu group 12 [ 0.281270] pci 0000:02:04.0: Adding to iommu group 12 [ 0.281283] pci 0000:02:05.0: Adding to iommu group 12 [ 0.281297] pci 0000:02:06.0: Adding to iommu group 12 [ 0.281311] pci 0000:02:07.0: Adding to iommu group 12 [ 0.281333] pci 0000:07:00.0: Adding to iommu group 12 [ 0.281521] pci 0000:08:00.0: Adding to iommu group 13 [ 0.281548] pci 0000:08:00.0: Using iommu direct mapping [ 0.281572] pci 0000:08:00.1: Adding to iommu group 13 [ 0.281655] pci 0000:09:00.0: Adding to iommu group 14 [ 0.281773] pci 0000:09:00.2: Adding to iommu group 15 [ 0.281938] pci 0000:09:00.3: Adding to iommu group 16 [ 0.282091] pci 0000:0a:00.0: Adding to iommu group 17 [ 0.282261] pci 0000:0a:00.2: Adding to iommu group 18 [ 0.282413] pci 0000:0a:00.3: Adding to iommu group 19 [ 0.282667] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.282670] pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada): [ 0.282672] PPR NX GT IA GA PC GA_vAPIC [ 0.282675] AMD-Vi: Interrupt remapping enabled [ 0.282676] AMD-Vi: Virtual APIC enabled [ 0.282829] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.283719] amd_uncore: AMD NB counters detected [ 0.283724] amd_uncore: AMD LLC counters detected [ 0.283924] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.283978] check: Scanning for low memory corruption every 60 seconds [ 0.284353] Initialise system trusted keyrings [ 0.284380] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.285121] zbud: loaded [ 0.285341] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.285359] fuse: init (API version 7.31) [ 0.288321] Key type asymmetric registered [ 0.288324] Asymmetric key pa**er 'x509' registered [ 0.288332] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 46) [ 0.288370] io scheduler mq-deadline registered [ 0.288372] io scheduler kyber registered [ 0.289370] pcieport 0000:00:01.3: PME: Signaling with IRQ 26 [ 0.289433] pcieport 0000:00:01.3: AER: enabled with IRQ 26 [ 0.289610] pcieport 0000:00:03.1: PME: Signaling with IRQ 27 [ 0.289651] pcieport 0000:00:03.1: AER: enabled with IRQ 27 [ 0.289821] pcieport 0000:00:07.1: PME: Signaling with IRQ 28 [ 0.289864] pcieport 0000:00:07.1: AER: enabled with IRQ 28 [ 0.290067] pcieport 0000:00:08.1: PME: Signaling with IRQ 30 [ 0.290110] pcieport 0000:00:08.1: AER: enabled with IRQ 30 [ 0.290802] efifb: probing for efifb [ 0.290811] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.290813] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.290815] efifb: scrolling: redraw [ 0.290816] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.291855] Console: switching to colour frame buffer device 128x48 [ 0.292849] fb0: EFI VGA frame buffer device [ 0.292926] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0 0/input/input0 [ 0.292956] ACPI: Power Button [PWRB] [ 0.292986] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp ut1 [ 0.294632] ACPI: Power Button [PWRF] [ 0.294678] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.294756] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.294850] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.294923] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.295022] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.295121] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.295216] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.295276] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.295350] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.295434] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.296873] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.297004] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.297258] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.318212] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655 0A [ 0.318946] Linux agpgart interface v0.103 [ 0.320655] brd: module loaded [ 0.322568] loop: module loaded [ 0.322790] ahci 0000:01:00.1: version 3.0 [ 0.322883] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled [ 0.323257] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 im pl SATA mode [ 0.323601] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 0.324311] scsi host0: ahci [ 0.324740] scsi host1: ahci [ 0.325146] scsi host2: ahci [ 0.325548] scsi host3: ahci [ 0.326032] scsi host4: ahci [ 0.326419] scsi host5: ahci [ 0.326812] scsi host6: ahci [ 0.327171] scsi host7: ahci [ 0.327492] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 i rq 40 [ 0.327804] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 i rq 40 [ 0.328108] ata3: DUMMY [ 0.328406] ata4: DUMMY [ 0.328706] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 i rq 40 [ 0.329018] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 i rq 40 [ 0.329326] ata7: DUMMY [ 0.329633] ata8: DUMMY [ 0.330033] ahci 0000:0a:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 imp l SATA mode [ 0.330353] ahci 0000:0a:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 0.330785] scsi host8: ahci [ 0.331127] ata9: SATA max UDMA/133 abar m4096@0xfce08000 port 0xfce08100 irq 42 [ 0.331970] scsi host9: pata_legacy [ 0.332325] ata10: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 [ 0.642678] ata9: SATA link down (SStatus 0 SControl 300) [ 0.804872] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.806240] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC64G, max UDMA/133 [ 0.806563] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.808018] ata1.00: configured for UDMA/133 [ 0.808419] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 C64G PQ : 0 ANSI: 5 [ 0.808844] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.808949] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 0.809521] sd 0:0:0:0: [sda] Write Protect is off [ 0.809872] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.809888] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 0.857317] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 0.858098] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.276434] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.277048] ata2.00: ATA-9: SPCC Solid State Disk, V1.2.2, max UDMA/133 [ 1.277431] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.277984] ata2.00: configured for UDMA/133 [ 1.278624] scsi 1:0:0:0: Direct-Access ATA SPCC Solid State .2 PQ : 0 ANSI: 5 [ 1.279182] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.279327] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.280079] sd 1:0:0:0: [sdb] Write Protect is off [ 1.280497] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.280506] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 1.281395] sdb: sdb1 sdb2 sdb3 [ 1.282135] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.300436] tsc: Refined TSC clocksource calibration: 3593.248 MHz [ 1.300938] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb68e6 ea4, max_idle_ns: 440795288133 ns [ 1.301428] clocksource: Switched to clocksource tsc -
[ 1.588106] ata5: SATA link down (SStatus 0 SControl 330) [ 1.901618] ata6: SATA link down (SStatus 0 SControl 330) [ 1.909107] scsi host9: pata_legacy [ 1.909578] ata11: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 [ 2.074291] libphy: Fixed MDIO Bus: probed [ 2.074752] tun: Universal TUN/TAP device driver, 1.6 [ 2.075283] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.075770] ehci-pci: EHCI PCI platform driver [ 2.076253] ehci-platform: EHCI generic platform driver [ 2.076733] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.077210] ohci-pci: OHCI PCI platform driver [ 2.077695] ohci-platform: OHCI generic platform driver [ 2.078177] uhci_hcd: USB Universal Host Controller Interface driver [ 2.078746] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.079235] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 1 [ 2.135016] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 qu irks 0x0000000000000410 [ 2.135598] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.04 [ 2.136050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 2.136496] usb usb1: Product: xHCI Host Controller [ 2.136935] usb usb1: Manufacturer: Linux 5.4.52 xhci-hcd [ 2.137369] usb usb1: SerialNumber: 0000:01:00.0 [ 2.137874] hub 1-0:1.0: USB hub found [ 2.138341] hub 1-0:1.0: 10 ports detected [ 2.142318] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.142791] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 2 [ 2.143270] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.143827] usb usb2: We don't know the algorithms for LPM for this host, dis abling LPM. [ 2.144275] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 5.04 [ 2.144706] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 2.145133] usb usb2: Product: xHCI Host Controller [ 2.145556] usb usb2: Manufacturer: Linux 5.4.52 xhci-hcd [ 2.145974] usb usb2: SerialNumber: 0000:01:00.0 [ 2.146566] hub 2-0:1.0: USB hub found [ 2.147024] hub 2-0:1.0: 4 ports detected [ 2.149040] xhci_hcd 0000:09:00.3: xHCI Host Controller [ 2.149450] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus numbe r 3 [ 2.149944] xhci_hcd 0000:09:00.3: hcc params 0x0270f665 hci version 0x100 qu irks 0x0000000040000410 [ 2.150440] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.04 [ 2.150853] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 2.151277] usb usb3: Product: xHCI Host Controller [ 2.151722] usb usb3: Manufacturer: Linux 5.4.52 xhci-hcd [ 2.152167] usb usb3: SerialNumber: 0000:09:00.3 [ 2.152718] hub 3-0:1.0: USB hub found [ 2.153120] hub 3-0:1.0: 4 ports detected [ 2.153599] xhci_hcd 0000:09:00.3: xHCI Host Controller [ 2.153985] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus numbe r 4 [ 2.154369] xhci_hcd 0000:09:00.3: Host supports USB 3.0 SuperSpeed [ 2.154751] usb usb4: We don't know the algorithms for LPM for this host, dis abling LPM. [ 2.155144] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 5.04 [ 2.155576] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 2.156004] usb usb4: Product: xHCI Host Controller [ 2.156431] usb usb4: Manufacturer: Linux 5.4.52 xhci-hcd [ 2.156857] usb usb4: SerialNumber: 0000:09:00.3 [ 2.157339] hub 4-0:1.0: USB hub found [ 2.157791] hub 4-0:1.0: 4 ports detected [ 2.158291] usbcore: registered new interface driver cdc_acm [ 2.158670] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters [ 2.159219] usbcore: registered new interface driver uas [ 2.159653] usbcore: registered new interface driver usb-storage [ 2.160080] usbcore: registered new interface driver ums-alauda [ 2.160524] usbcore: registered new interface driver ums-cypress [ 2.160951] usbcore: registered new interface driver ums-datafab [ 2.161320] usbcore: registered new interface driver ums_eneub6250 [ 2.161677] usbcore: registered new interface driver ums-freecom [ 2.162027] usbcore: registered new interface driver ums-isd200 [ 2.162366] usbcore: registered new interface driver ums-jumpshot [ 2.162701] usbcore: registered new interface driver ums-karma [ 2.163032] usbcore: registered new interface driver ums-onetouch [ 2.163385] usbcore: registered new interface driver ums-realtek [ 2.163741] usbcore: registered new interface driver ums-sddr09 [ 2.164096] usbcore: registered new interface driver ums-sddr55 [ 2.164461] usbcore: registered new interface driver ums-usbat [ 2.164836] i8042: PNP: No PS/2 controller found. [ 2.165238] rtc_cmos 00:01: RTC can wake from S4 [ 2.165793] rtc_cmos 00:01: registered as rtc0 [ 2.166104] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpe t irqs [ 2.166406] i2c /dev entries driver [ 2.166997] ledtrig-cpu: registered to indicate activity on CPUs [ 2.167333] EFI Variables Facility v0.08 2004-May-17 [ 2.194418] NET: Registered protocol family 17 [ 2.194785] NET: Registered protocol family 33 [ 2.195123] Key type rxrpc registered [ 2.195452] Key type rxrpc_s registered [ 2.195820] Key type dns_resolver registered [ 2.196739] microcode: CPU0: patch_level=0x08001138 [ 2.197058] microcode: CPU1: patch_level=0x08001138 [ 2.197365] microcode: CPU2: patch_level=0x08001138 [ 2.197676] microcode: CPU3: patch_level=0x08001138 [ 2.198060] microcode: CPU4: patch_level=0x08001138 [ 2.198431] microcode: CPU5: patch_level=0x08001138 [ 2.198794] microcode: CPU6: patch_level=0x08001138 [ 2.199153] microcode: CPU7: patch_level=0x08001138 [ 2.199496] microcode: CPU8: patch_level=0x08001138 [ 2.199794] microcode: CPU9: patch_level=0x08001138 [ 2.200128] microcode: CPU10: patch_level=0x08001138 [ 2.200453] microcode: CPU11: patch_level=0x08001138 [ 2.200786] microcode: Microcode Update Driver: v2.2. [ 2.200788] IPI shorthand broadcast: enabled [ 2.201269] sched_clock: Marking stable (2212020156, -10993888)->(2246391327, -45365059) [ 2.201630] registered taskstats version 1 [ 2.201874] Loading compiled-in X.509 certificates [ 2.202730] Loaded X.509 cert 'Build time autogenerated kernel key: 826c84c26 702261d1b84c8befde52fa33dba52bf' [ 2.203018] zswap: loaded using pool lzo/zbud [ 2.203613] Key type big_key registered [ 2.203971] Key type encrypted registered [ 2.204453] rtc_cmos 00:01: setting system clock to 2020-10-11T09:11:51 UTC ( 1602407511) [ 2.204900] acpi_cpufreq: overriding BIOS provided _PSD data [ 2.206131] Freeing unused kernel image memory: 1728K [ 2.218031] Write protecting the kernel read-only data: 20480k [ 2.218788] Freeing unused kernel image memory: 2016K [ 2.219394] Freeing unused kernel image memory: 1920K [ 2.219685] Run /init as init process [ 2.470937] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 2.478751] usb 3-1: new full-speed USB device number 2 using xhci_hcd [ 2.494726] usb 2-2: New USB device found, idVendor=1058, idProduct=263a, bcd Device=50.06 [ 2.495094] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.495394] usb 2-2: Product: Game Drive [ 2.495695] usb 2-2: Manufacturer: Western Digital [ 2.496010] usb 2-2: SerialNumber: 3550484552455644 [ 2.504237] usb-storage 2-2:1.0: USB Mass Storage device detected [ 2.504783] scsi host9: usb-storage 2-2:1.0 [ 2.551294] EXT4-fs (sdb3): recovery complete [ 2.553123] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 2.565810] /dev/loop0: Can't open blockdev [ 2.568787] random: fast init done [ 2.638789] usb 3-1: New USB device found, idVendor=1131, idProduct=1004, bcd Device= 3.73 [ 2.639154] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.639515] usb 3-1: Product: ISSCEDRBTA [ 2.639877] usb 3-1: Manufacturer: ISSC [ 2.761015] usb 3-2: new full-speed USB device number 3 using xhci_hcd [ 2.867171] udevd[326]: starting version 3.2.9 [ 2.871062] random: udevd: uninitialized urandom read (16 bytes read) [ 2.871667] random: udevd: uninitialized urandom read (16 bytes read) [ 2.872105] random: udevd: uninitialized urandom read (16 bytes read) [ 2.875680] udevd[327]: starting eudev-3.2.9 [ 2.903787] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C 9062910 (first instance was on PNP0C14:00) [ 2.915234] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revisio n 0 [ 2.915773] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port sele ction [ 2.916462] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb2 0 [ 2.917212] ccp 0000:09:00.2: enabling device (0000 -> 0002) [ 2.918892] ccp 0000:09:00.2: ccp enabled [ 2.932400] random: crng init done [ 2.932826] random: 5 urandom warning(s) missed due to ratelimiting [ 2.937573] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 2.938335] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 2.938396] cryptd: max_cpu_qlen set to 1000 [ 2.938959] sp5100-tco sp5100-tco: Watchdog hardware is disabled [ 2.940520] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 2.946794] usb 3-2: New USB device found, idVendor=045e, idProduct=0291, bcd Device= 1.14 [ 2.947641] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.949001] AVX2 version of gcm_enc/dec engaged. [ 2.949822] AES CTR mode by8 optimization enabled [ 2.950496] asus_wmi: ASUS WMI generic driver loaded [ 2.951812] libphy: r8169: probed [ 2.952443] r8169 0000:07:00.0 eth0: RTL8168h/8111h, 40:b0:76:44:d6:52, XID 5 41, IRQ 49 [ 2.952885] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx c hecksumming: ko] [ 2.967527] asus_wmi: Initialization: 0x0 [ 2.968180] asus_wmi: BIOS WMI version: 0.9 [ 2.968851] asus_wmi: SFUN value: 0x0 [ 2.969351] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 2.970293] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/in put2 [ 2.994520] snd_hda_intel 0000:08:00.1: Handle vga_switcheroo audio client [ 2.995157] snd_hda_intel 0000:08:00.1: Force to non-snoop mode [ 2.995860] snd_hda_intel 0000:0a:00.3: enabling device (0000 -> 0002) [ 3.031532] [drm] amdgpu kernel modesetting enabled. [ 3.032040] Parsing CRAT table with 1 nodes [ 3.032469] Ignoring ACPI CRAT on non-APU system [ 3.032899] Virtual CRAT table created for CPU [ 3.033336] Parsing CRAT table with 1 nodes [ 3.033764] Creating topology SYSFS entries [ 3.034195] Topology: Add CPU node [ 3.034606] Finished initializing topology [ 3.035126] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff [ 3.035563] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff [ 3.036005] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfcf00000 -> 0xfcf3ffff [ 3.036447] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 3.036447] fb0: switching to amdgpudrmfb from EFI VGA [ 3.036956] Console: switching to colour dummy device 80x25 [ 3.037000] amdgpu 0000:08:00.0: vgaarb: deactivate vga console [ 3.037258] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x 174B:0x353E 0xEF). [ 3.037272] [drm] register mmio base: 0xFCF00000 [ 3.037274] [drm] register mmio size: 262144 [ 3.037283] [drm] add ip block number 0 <vi_common> [ 3.037285] [drm] add ip block number 1 <gmc_v8_0> [ 3.037287] [drm] add ip block number 2 <tonga_ih> [ 3.037290] [drm] add ip block number 3 <gfx_v8_0> [ 3.037292] [drm] add ip block number 4 <sdma_v3_0> [ 3.037295] [drm] add ip block number 5 <powerplay> [ 3.037298] [drm] add ip block number 6 <dm> [ 3.037300] [drm] add ip block number 7 <uvd_v6_0> [ 3.037303] [drm] add ip block number 8 <vce_v3_0> [ 3.037508] ATOM BIOS: 113-YE353HM-TOE [ 3.037522] [drm] UVD is enabled in VM mode [ 3.037524] [drm] UVD ENC is enabled in VM mode [ 3.037526] [drm] VCE enabled in VM mode [ 3.037549] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 3.039044] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00: 03.1/0000:08:00.1/sound/card0/input3 [ 3.039097] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00: 03.1/0000:08:00.1/sound/card0/input4 [ 3.039139] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00: 03.1/0000:08:00.1/sound/card0/input5 [ 3.039179] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00: 03.1/0000:08:00.1/sound/card0/input6 [ 3.039218] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00 :03.1/0000:08:00.1/sound/card0/input7 [ 3.039256] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00 :03.1/0000:08:00.1/sound/card0/input8 [ 3.040791] amdgpu 0000:08:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5F FFFFFFF (8192M used) [ 3.040795] amdgpu 0000:08:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0F FFFFFF -
[ 3.040805] [drm] Detected VRAM RAM=8192M, BAR=256M [ 3.040808] [drm] RAM width 256bits GDDR5 [ 3.042037] [TTM] Zone kernel: Available graphics memory: 8194952 KiB [ 3.042041] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 3.042044] [TTM] Initializing pool allocator [ 3.042048] [TTM] Initializing DMA pool allocator [ 3.042083] [drm] amdgpu: 8192M of VRAM memory ready [ 3.042087] [drm] amdgpu: 8192M of GTT memory ready. [ 3.042097] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 3.042480] kvm: Nested Virtualization enabled [ 3.042487] kvm: Nested Paging enabled [ 3.042488] SVM: Virtual VMLOAD VMSAVE supported [ 3.042489] SVM: Virtual GIF supported [ 3.043717] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). [ 3.044717] [drm] Chained IB support enabled! [ 3.046867] amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu [ 3.048813] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 3.049785] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 3.053960] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line _outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 3.053965] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0 /0x0/0x0) [ 3.053968] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0 /0x0) [ 3.053971] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 3.053973] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 3.053975] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 3.053977] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 3.053979] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 3.053981] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 3.054970] MCE: In-kernel MCE decoding enabled. [ 3.056888] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.056891] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.056891] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.056891] (Note that use of the override may cause unknown side effects.) [ 3.095258] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00: 08.1/0000:0a:00.3/sound/card1/input9 [ 3.095297] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:0 8.1/0000:0a:00.3/sound/card1/input10 [ 3.095329] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/ 0000:0a:00.3/sound/card1/input11 [ 3.095395] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:0 8.1/0000:0a:00.3/sound/card1/input12 [ 3.095398] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.095399] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.095399] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.095399] (Note that use of the override may cause unknown side effects.) [ 3.095427] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/00 00:00:08.1/0000:0a:00.3/sound/card1/input13 [ 3.099446] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099452] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099455] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099458] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099461] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099464] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.099467] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it' s not patched [ 3.109379] [drm] DM_PPLIB: values for Engine clock [ 3.109382] [drm] DM_PPLIB: 300000 [ 3.109384] [drm] DM_PPLIB: 466000 [ 3.109385] [drm] DM_PPLIB: 751000 [ 3.109386] [drm] DM_PPLIB: 1019000 [ 3.109387] [drm] DM_PPLIB: 1074000 [ 3.109389] [drm] DM_PPLIB: 1118000 [ 3.109390] [drm] DM_PPLIB: 1119000 [ 3.109391] [drm] DM_PPLIB: 1120000 [ 3.109392] [drm] DM_PPLIB: Validation clocks: [ 3.109394] [drm] DM_PPLIB: engine_max_clock: 112000 [ 3.109395] [drm] DM_PPLIB: memory_max_clock: 210000 [ 3.109396] [drm] DM_PPLIB: level : 8 [ 3.109398] [drm] DM_PPLIB: values for Memory clock [ 3.109400] [drm] DM_PPLIB: 300000 [ 3.109401] [drm] DM_PPLIB: 2100000 [ 3.109402] [drm] DM_PPLIB: Validation clocks: [ 3.109403] [drm] DM_PPLIB: engine_max_clock: 112000 [ 3.109405] [drm] DM_PPLIB: memory_max_clock: 210000 [ 3.109406] [drm] DM_PPLIB: level : 8 [ 3.120677] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.120681] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.120681] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.120681] (Note that use of the override may cause unknown side effects.) [ 3.121060] [drm] Display Core initialized with v3.2.48! [ 3.121175] snd_hda_intel 0000:08:00.1: bound 0000:08:00.0 (ops amdgpu_dm_aud io_component_bind_ops [amdgpu]) [ 3.146706] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.146710] [drm] Driver supports precise vblank timestamp query. [ 3.152429] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.152434] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.152434] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.152434] (Note that use of the override may cause unknown side effects.) [ 3.173492] [drm] UVD and UVD ENC initialized successfully. [ 3.176437] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.176440] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.176440] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.176440] (Note that use of the override may cause unknown side effects.) [ 3.199029] usb 3-3: new full-speed USB device number 4 using xhci_hcd [ 3.205515] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.205518] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.205518] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.205518] (Note that use of the override may cause unknown side effects.) [ 3.228877] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.228880] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.228880] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.228880] (Note that use of the override may cause unknown side effects.) [ 3.264435] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.264438] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.264438] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.264438] (Note that use of the override may cause unknown side effects.) [ 3.274488] [drm] VCE initialized successfully. [ 3.275170] kfd kfd: Allocated 3969056 bytes on gart [ 3.275514] Virtual CRAT table created for GPU [ 3.275516] Parsing CRAT table with 1 nodes [ 3.275521] Creating topology SYSFS entries [ 3.275568] Topology: Add dGPU node [0x67df:0x1002] [ 3.275571] kfd kfd: added device 1002:67df [ 3.280815] [drm] fb mappable at 0xE0830000 [ 3.280818] [drm] vram apper at 0xE0000000 [ 3.280820] [drm] size 33177600 [ 3.280821] [drm] fb depth is 24 [ 3.280823] [drm] pitch is 15360 [ 3.280882] fbcon: amdgpudrmfb (fb0) is primary device [ 3.293513] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.293514] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.293514] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.293514] (Note that use of the override may cause unknown side effects.) [ 3.308689] Console: switching to colour frame buffer device 480x135 [ 3.332473] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.332475] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.332475] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.332475] (Note that use of the override may cause unknown side effects.) [ 3.332854] amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device [ 3.340593] [drm] Initialized amdgpu 3.35.0 20150101 for 0000:08:00.0 on mino r 0 [ 3.349815] usb 3-3: New USB device found, idVendor=045e, idProduct=02ea, bcd Device= 3.01 [ 3.349843] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.349863] usb 3-3: Product: Controller [ 3.349876] usb 3-3: Manufacturer: Microsoft [ 3.349889] usb 3-3: SerialNumber: 3033363030333236383332363430 [ 3.359794] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.359822] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.359822] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.359822] (Note that use of the override may cause unknown side effects.) [ 3.395344] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.395363] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.395363] Either enable ECC checking or force module loading by setting 'e cc_enable_override'. [ 3.395363] (Note that use of the override may cause unknown side effects.) [ 3.486141] usb 3-4: new low-speed USB device number 5 using xhci_hcd [ 3.541241] scsi 9:0:0:0: Direct-Access WD Game Drive 5006 PQ : 0 ANSI: 6 [ 3.541475] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 3.541639] sd 9:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16 ). [ 3.541765] sd 9:0:0:0: [sdc] 23437770752 512-byte logical blocks: (12.0 TB/1 0.9 TiB) [ 3.541783] sd 9:0:0:0: [sdc] 4096-byte physical blocks [ 3.542679] sd 9:0:0:0: [sdc] Write Protect is off [ 3.542692] sd 9:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 3.543428] sd 9:0:0:0: [sdc] No Caching mode page found [ 3.543441] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 3.576637] sdc: sdc1 [ 3.579192] sd 9:0:0:0: [sdc] Attached SCSI disk [ 3.632883] usb 3-4: New USB device found, idVendor=0e8f, idProduct=2517, bcd Device= 1.00 [ 3.632910] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.672870] hidraw: raw HID events driver (C) Jiri Kosina [ 3.674858] input: Microsoft X-Box One S pad as /devices/pci0000:00/0000:00:0 7.1/0000:09:00.3/usb3/3-3/3-3:1.0/input/input14 [ 3.675018] usbcore: registered new interface driver xpad [ 3.683789] Bluetooth: Core ver 2.22 [ 3.683821] NET: Registered protocol family 31 [ 3.683834] Bluetooth: HCI device and connection manager initialized [ 3.683853] Bluetooth: HCI socket layer initialized [ 3.683868] Bluetooth: L2CAP socket layer initialized [ 3.683883] Bluetooth: SCO socket layer initialized [ 3.689348] usbcore: registered new interface driver btusb [ 3.706994] usbcore: registered new interface driver usbhid [ 3.707024] usbhid: USB HID core driver [ 3.709083] input: HID 0e8f:2517 as /devices/pci0000:00/0000:00:07.1/0000:09: 00.3/usb3/3-4/3-4:1.0/0003:0E8F:2517.0001/input/input15 [ 3.761269] hid-generic 0003:0E8F:2517.0001: input,hidraw0: USB HID v1.10 Key board [HID 0e8f:2517] on usb-0000:09:00.3-4/input0 [ 3.761469] input: HID 0e8f:2517 Consumer Control as /devices/pci0000:00/0000 :00:07.1/0000:09:00.3/usb3/3-4/3-4:1.1/0003:0E8F:2517.0002/input/input16 [ 3.813220] input: HID 0e8f:2517 as /devices/pci0000:00/0000:00:07.1/0000:09: 00.3/usb3/3-4/3-4:1.1/0003:0E8F:2517.0002/input/input17 [ 3.813292] input: HID 0e8f:2517 Mouse as /devices/pci0000:00/0000:00:07.1/00 00:09:00.3/usb3/3-4/3-4:1.1/0003:0E8F:2517.0002/input/input18 [ 3.813363] hid-generic 0003:0E8F:2517.0002: input,hidraw1: USB HID v1.10 Mou se [HID 0e8f:2517] on usb-0000:09:00.3-4/input1 [ 3.816503] mousedev: PS/2 mouse device common for all mice [ 4.461658] 8021q: 802.1Q VLAN Support v1.8 [ 4.480896] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase [ 4.482294] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.494069] Generic FE-GE Realtek PHY r8169-700:00: attached PHY driver [Gene ric FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE) [ 4.584221] r8169 0000:07:00.0 eth0: Link is Down [ 5.169362] snd_hda_intel 0000:08:00.1: IRQ timing workaround is activated fo r card #0. Suggest a bigger bdl_pos_adj. [ 6.783574] squashfs: Unknown parameter 'fmask' [ 6.783787] FAT-fs (sda2): utf8 is not a recommended IO cha**et for FAT files ystems, filesystem will be case sensitive! [ 6.786785] FAT-fs (sda2): Volume was not properly unmounted. Some data may b e corrupt. Please run fsck. [ 7.362203] squashfs: Unknown parameter 'fmask' [ 7.362627] fuseblk: Unknown parameter 'fmask' [ 7.808785] r8169 0000:07:00.0 eth0: Link is Up - 1Gbps/Full - flow control r x/tx [ 8.430860] NET: Registered protocol family 10 [ 8.431187] Segment Routing with IPv6 [ 10.627364] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.627366] Bluetooth: BNEP filters: protocol multicast [ 10.627370] Bluetooth: BNEP socket layer initialized [ 10.634365] NET: Registered protocol family 38 -
J'ai dû le faire en quatre parties car il y avait trop de caractères pour un seul message !
-
Merci pour le log
Bon, à moins d'avoir du c... das les yeux, j'vois rien d'erratique...
On continue de chercher...
-
Si tu arrives à partager une archive de support, je prends aussi
