x64 system running 18.04.20 doesn't work too well

ShamanMogz · 1 May 2018, 18:26

@Substring & @paradadf I re-ran the scripts augmenting the commands from my previous attempt and got the following results:

 # sh ./recalbox-part.sh boot
/dev/sda1
# sh ./recalbox-part.sh system
/dev/sda2
# sh ./recalbox-part.sh share_internal
/dev/sda3

Substring · 1 May 2018, 19:09

@shamanmogz it should be fine by now

ShamanMogz · 1 May 2018, 19:12

@Substring

Afraid not, I tried making a change as you suggetsed and rebooting the machine, but still I get Storage N/A and settings don't persist.

ShamanMogz · 1 May 2018, 19:25

@Substring I've listed my drives and get:

 # cat /proc/mounts
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
none /dev devtmpfs rw,relatime,size=1978844k,nr_inodes=494711,mode=755 0 0
/dev/sda2 / ext4 rw,relatime,errors=remount-ro,data=ordered 0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /dev/shm tmpfs rw,relatime,mode=777 0 0
tmpfs /tmp tmpfs rw,relatime 0 0
tmpfs /var tmpfs rw,relatime 0 0
tmpfs /run tmpfs rw,relatime 0 0
tmpfs /recalbox/share tmpfs rw,relatime,size=131072k 0 0
/dev/sda1 /media/usb0 vfat rw,noatime,fmask=0022,dmask=0022,codepage=437,iocha&ast;&ast;et=utf8,shortname=mixed,flush,errors=remount-ro 0 0

or:

 # blkid
/dev/sda2: LABEL="RECALBOX" UUID="3638b519-b279-4f9a-981c-cce4de83472f" TYPE="ext4"
/dev/sda1: LABEL="BOOT" UUID="7DD8-6D51" TYPE="vfat"

ShamanMogz · 2 May 2018, 15:01

@substring If it's easier I'm happy to roll back to 18.03.30 and wait for the next release for this fix

Substring · 2 May 2018, 15:33

@shamanmogz i don't get it ... It does find th root partition but can't have a share. Can you fdisk /dev/sda then p then enter and copy the result ? Press q then enter to quit

ShamanMogz · 2 May 2018, 18:20

@Substring Ran fdisk as requested

# fdisk /dev/sda
fdisk: device has more than 2^32 sectors, can't use all of them

The number of cylinders for this disk is set to 267349.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/sda: 2199.0 GB, 2199023255040 bytes
255 heads, 63 sectors/track, 267349 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks  Id System
/dev/sda1               1           9       65536   c Win95 FAT32 (LBA)
Partition 1 does not end on cylinder boundary
/dev/sda2               9         311     2424018  83 Linux
Partition 2 does not end on cylinder boundary

Command (m for help): q

Substring · 2 May 2018, 20:48

@shamanmogz i think i get it : how big is yout drive ? The device has more than 2^32 sectors, can't use all of them looks like we can't build the share partition.

ShamanMogz · 3 May 2018, 06:53

@Substring My hard drive is now 3TB.

When I started out I was using a 0.5TB hard drive on 18.03.30
I upgraded that drive to 18.04.20 using the inbuilt UI in recalbox
Then the problems started to happen
I then changed drives to 3TB and used a fresh 18.04.20 image

Is there a maximum HDD that is supported?

Substring · 3 May 2018, 10:01

@shamanmogz you make me search real deep ...
Recalbox uses a MBR partition table, not GPT. This limits the numver of sectors to 2^32, which is around 2TB.

Going to GPT may not be a good idea yet.

ShamanMogz · 3 May 2018, 13:33

@Substring Ok I will roll back to my 0.5TB drive for now unless you think I can partition my 3TB to give me 2x 1.5TB internal shares.

Substring · 3 May 2018, 15:48

@shamanmogz why do you need that much space ? If it's fully loaded es will be real slow probably.

And no, we could eventually have a 2TB internal share, but nothing more, the last TB would be wasted

voljega · 3 May 2018, 15:56

@substring for a full collection of all systems, 2TB is not enough

ShamanMogz · 3 May 2018, 16:34

@substring It's more to do with i have a 3TB HDD kicking around so why not use it. I'm flashing the 0.5TB as I type.

Substring · 3 May 2018, 16:49

@shamanmogz you would be a good guinea pig for some advanced logging i've been working on. Would you agree to give a try to it ? You'd just need to change the updates.type value in recalbox.conf, make the upgrade and report some logs

ShamanMogz · 3 May 2018, 17:23

@Substring yeah i'm cool with that. is there a better way to do this rather than using forum posts?

Substring · 3 May 2018, 17:26

@shamanmogz discord ?

ShamanMogz · 3 May 2018, 17:30

@Substring sure, just installing it. Note i don't have a mic on this system - i can get hold of one in a few days, but for now it's just text chat. What's your server?

Substring · 3 May 2018, 19:03

@shamanmogz we've advertised it some days ago. No need for a mic

By the way, we can do anneasier way : run bash -x /etc/init.d/S11share start and give me the output please

ShamanMogz · 4 May 2018, 18:38

@substring said in x64 system running 18.04.20 doesn't work too well:

bash -x /etc/init.d/S11share start

Note: I'm back on a 0.5 TB drive and it's running ok

 Using username "root".
root@recalbox's password:
# bash -x /etc/init.d/S11share start
+ test start = stop
+ test start '!=' start
+ SHARECONFFILE=/boot/recalbox-boot.conf
++ /recalbox/scripts/recalbox-part.sh share_internal
+ INTERNALDEVICE=/dev/sda3
++ cat /boot/recalbox-boot.conf
++ grep sharedevice=
++ head -n1
++ cut -d= -f2
+ SHAREDEVICE=INTERNAL
+ [[ 0 -ne 0 ]]
+ [[ INTERNAL == '' ]]
+ INTERNALDEVICETYPE=ext4
++ getMaxTryConfig /boot/recalbox-boot.conf
++ SHARECONFFILE=/boot/recalbox-boot.conf
+++ grep -E '^[ \t]*sharewait[ \t]*=' /boot/recalbox-boot.conf
+++ sed -e 's+^[ \t]*sharewait[ \t]*=++'
++ X=
++ echo ''
++ grep -qE '^[0-9][0-9]*$'
++ echo 7
+ MAXTRY=7
+ NTRY=0
+ test -e /dev/sda3
+ RMODE=INTERNAL
+ echo INTERNAL
+ grep -qE '^DEV '
+ MODE=INTERNAL
+ case "${MODE}" in
+ /recalbox/scripts/recalbox-mount.sh ext4 1 /dev/sda3 /recalbox/share
mount: mounting /dev/sda3 on /recalbox/share failed: Device or resource busy
+ mount -t tmpfs -o size=128M tmpfs /recalbox/share
+ ls /var/run/usbmount.delay
+ read RULE
+ touch /var/run/recalbox.share.mounted
+ logpath=/recalbox/share/system/logs
+ for bootlogfile in '/tmp/logappend-*.*'
++ echo '/tmp/logappend-*.*'
++ sed 's|/tmp/logappend-||'
+ destfile='*.*'
+ cat '/tmp/logappend-*.*'
/etc/init.d/S11share: line 289: /recalbox/share/system/logs/*.*: No such file or                                                                          directory
+ rm '/tmp/logappend-*.*'
rm: can't remove '/tmp/logappend-*.*': No such file or directory

x64 system running 18.04.20 doesn't work too well

Want to support us ?

60
Online

98.0k
Users

28.0k
Topics

186.9k
Posts

	# sh ./recalbox-part.sh boot
	/dev/sda1
	# sh ./recalbox-part.sh system
	/dev/sda2
	# sh ./recalbox-part.sh share_internal
	/dev/sda3

	# cat /proc/mounts
	proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
	sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
	none /dev devtmpfs rw,relatime,size=1978844k,nr_inodes=494711,mode=755 0 0
	/dev/sda2 / ext4 rw,relatime,errors=remount-ro,data=ordered 0 0
	devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0
	tmpfs /dev/shm tmpfs rw,relatime,mode=777 0 0
	tmpfs /tmp tmpfs rw,relatime 0 0
	tmpfs /var tmpfs rw,relatime 0 0
	tmpfs /run tmpfs rw,relatime 0 0
	tmpfs /recalbox/share tmpfs rw,relatime,size=131072k 0 0
	/dev/sda1 /media/usb0 vfat rw,noatime,fmask=0022,dmask=0022,codepage=437,iocha&ast;&ast;et=utf8,shortname=mixed,flush,errors=remount-ro 0 0

	# blkid
	/dev/sda2: LABEL="RECALBOX" UUID="3638b519-b279-4f9a-981c-cce4de83472f" TYPE="ext4"
	/dev/sda1: LABEL="BOOT" UUID="7DD8-6D51" TYPE="vfat"

	Using username "root".
	root@recalbox's password:
	# bash -x /etc/init.d/S11share start
	+ test start = stop
	+ test start '!=' start
	+ SHARECONFFILE=/boot/recalbox-boot.conf
	++ /recalbox/scripts/recalbox-part.sh share_internal
	+ INTERNALDEVICE=/dev/sda3
	++ cat /boot/recalbox-boot.conf
	++ grep sharedevice=
	++ head -n1
	++ cut -d= -f2
	+ SHAREDEVICE=INTERNAL
	+ [[ 0 -ne 0 ]]
	+ [[ INTERNAL == '' ]]
	+ INTERNALDEVICETYPE=ext4
	++ getMaxTryConfig /boot/recalbox-boot.conf
	++ SHARECONFFILE=/boot/recalbox-boot.conf
	+++ grep -E '^[ \t]sharewait[ \t]=' /boot/recalbox-boot.conf
	+++ sed -e 's+^[ \t]sharewait[ \t]=++'
	++ X=
	++ echo ''
	++ grep -qE '^[0-9][0-9]*$'
	++ echo 7
	+ MAXTRY=7
	+ NTRY=0
	+ test -e /dev/sda3
	+ RMODE=INTERNAL
	+ echo INTERNAL
	+ grep -qE '^DEV '
	+ MODE=INTERNAL
	+ case "${MODE}" in
	+ /recalbox/scripts/recalbox-mount.sh ext4 1 /dev/sda3 /recalbox/share
	mount: mounting /dev/sda3 on /recalbox/share failed: Device or resource busy
	+ mount -t tmpfs -o size=128M tmpfs /recalbox/share
	+ ls /var/run/usbmount.delay
	+ read RULE
	+ touch /var/run/recalbox.share.mounted
	+ logpath=/recalbox/share/system/logs
	+ for bootlogfile in '/tmp/logappend-.'
	++ echo '/tmp/logappend-.'
	++ sed 's\|/tmp/logappend-\|\|'
	+ destfile='.'
	+ cat '/tmp/logappend-.'
	/etc/init.d/S11share: line 289: /recalbox/share/system/logs/.: No such file or directory
	+ rm '/tmp/logappend-.'
	rm: can't remove '/tmp/logappend-.': No such file or directory

x64 system running 18.04.20 doesn't work too well

Want to support us ?

60Online

98.0kUsers

28.0kTopics

186.9kPosts

60
Online

98.0k
Users

28.0k
Topics

186.9k
Posts