@Zing anyways, recalbox sux, it did eat my entire 16gb sd card

alvin, i just forced retroarch using console hack and installed mednafen and yaba sanshiro cores.
content did not list, so it could be opened with libretro w/o any args

@alvin i know but mednafen runs s m o o t h which allows you to emulate nec pce pcfx sega saturn(and about sega saturn theres yaba sanshiro which runs nice on rpi3b+).

When i found some redump format gdroms(puyo puyo fever, dream passport 3, etc.) i wanted to convert them to chd with chdman. After transferring to my rpi3b+ they did not open properly (empty Dreamcast dashboard or even core crashing on rom). Help

Really because it is 32 bits console with nec v810 cpu which is their own simple architecture based on pc engine. Pc fx ga emulation should work as well because it is now 64 bits

dear @pitch64 well yaba sanshiro runs perfectly on arm i tried on retro pie it gave 30fps w/o tesselation

unlikely from retropie idk why recalbox allows saturn emulation only from rpi4
[WHY]

@zing when I was on HDMI it was running p e r f e c t. No lags. No anomalies. But when I switched to crt the troubles started.

@ssssq also got enter key issue(but that's not your problem )

after perfect crt setup I decided to play some dreamcast games. I had some gd-rom rips taken from cdromance and one ripped from my own gd-rom. here's the list of games i've got: sonic adventure 2(Echelon. my gd rom rip), puyo puyo fever(DCRES, CDromance, chd), puyo puyo 4(CDromance chd). I started puyo puyo fever, but when audio surround logo apperars I saw some graphical issues(some unknown shards of color yellow and green) next the most of the game's intro was missing textures and title screen was black. when I tried to go into menu the emulator crashed. after this I tried sonic adventure 2. the game functions as normal but when it tries to load a level it freezes, but you can exit from it. And puyo puyo 4 was played as normal(no issuses). Please fix the issue, who also got the same problem write in comments. I've got RPI3B+.

@ssssq sorry for the big bold
i hate markdown reaction to the hashtag symbol
p.s. how to setup

afther binding sd card to recalbox come in and edit config.txt no recalbox.conf edit needed

p.p.s i'm bad at english but good at russian and japanese

here it goes:

############################################################################
# Boot loader configuration                                                #
# Warning: do not edit this file as it will be overwritten when upgrading! #
############################################################################
# ch_createairboat yes it is
# Using /etc/modules is deprecated and no longer supported on 4.4 kernel
# So manually enable audio
dtparam=audio=on

# if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or
# give a low resolution because tv had no enough time to initialize it
boot_delay=3

# disable boot rainbow
disable_splash=1

# default CEC name
cec_osd_name=recalbox

avoid_safe_mode=1

kernel=boot/linux
initramfs boot/initrd.gz

# force hdmi while the tv can take time before sending the signal on the hdmi output
hdmi_force_hotplug=0
hdmi_ignore_hotplug=1
sdtv_mode=2
sdtv_aspect=1
sdtv_disable_colourburst=0

# total amount of GPU memory
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=448

# your settings can be set in /boot/recalbox-user-config.txt
include recalbox-user-config.txt

# overclocking settings are automatically managed in this file
# do not remove this line, nor edit the file
include recalbox-oc-config.txt

# Raise the first security limit up to 70° instead of 60° for pi3 and pi4
[pi3]
temp_soft_limit=70

[pi4]
temp_soft_limit=70
dtoverlay=vc4-kms-v3d

# disable 4k resolution
hdmi_pixel_freq_limit:0=200000000
hdmi_pixel_freq_limit:1=200000000

# custom config
[all]

@zing i found the problem it is autochange
i mean that boot is on crt bu es runs on hdmi

@zing i got stuck at boot screen at crt i cannot go to es to flash new ver

@zing why i got stuck at the recalbox logo(not splash) and also any colour replaced with rainbow

attempting to install sd card reader driver

I wanted to config as crt, but after all it softlocked at startup(recalbox logo card) and colors are wrong, also after i wanted to recover usong rpi imager my sd is not found(i using microsd to sd adapter). Help me pls!

so I'm started to play animal crossing(n64 version patched to english) and I have got stuck w/ the fact that mupen64 hardlocks every time it starts to render something
p.s. somtimes I got sended back to emulationstation
p.p.s. I also tried to use 64dd(wich is using ParaLLEl N64 do not render some textures, but some are replaced with their main color)