Posts made by rastaman1201

Hi,

I have an Ultimarc trackball and some games wont work and I am trying to get into MAME2003Plus device mapping to try and fix the problem. Just wondering if there is a way to get into the MAME2003Plus full menu in Recalbox? I got the MAME menu in Retroarch up but there is no device mapping available in that menu. Is there a way to load up MAME another way for the full menu?

Thanks

@rastaman1201

One more thing to add about editing the systemlist.xml in /recalbox/share/system/.emulationstation/, if you just want to add additional system(s) you don't need any of the other system information in the file, just the new system(s) info you want to add. For example I added a new system for all the trackball games on my arcade, I kept the mame systemlist information in the file and deleted the rest of the info in the file, I then edited the mame system info by changing the fullname, path, and theme. I also changed a few characters in the uuid number/letter chain to make it unique. I'm pretty sure this is also a necessary thing you need to do.

Figured it out (much praise to @Nanaki)
Recalbox wiki guide: https://wiki.recalbox.com/en/advanced-usage/systems-display#add-a-custom-system

1. Use your PC with PuTTY installed to SSH over your network into Recalbox while its up and running. (if you dont know how to use commands in the prompt window follow this easy guide, https://www.youtube.com/watch?v=IVquJh3DXUA)

2. Use PuTTY command prompt to get to /recalbox/share_init/system/.emulationstation/
   where the systemlist.xml is located. Copy that file to /recalbox/share/system/.emulationstation/ .

3. I would then recommend using Linux Mint to access the file system.(You can do it many other ways) Go to /recalbox/share/system/.emulationstation/ where systemlist.xml is located. ( you will need to make sure and show hidden files and probably open it as root folder by right clicking in the folder. Make a backup of the file in the same location.

4. Follow these instructions from Recalbox Wiki

Add a custom system

You must NOT MODIFY the original systemlist.xml file (which is in the share_init directory). If there are any problems with the changes you make later, this file is the only source to make Recalbox work properly.

This manipulation does not add a new emulator to Recalbox but adds a new system entry to the selection menu.

It is possible to combine the modification of the system order with the addition of one or more custom systems.

As with changing the system order, adding a custom system must be done only from the systemlist.xml file in the following directory /recalbox/share/system/.emulationstation/systemlist.xml.

Originally, this file does not exist. You must either copy the original file or create a new file. Once the new file is created, it is now possible to add a new system to it.

If, in the new file, a system is incorrectly filled in, priority is given to the original file. For the new file, all the input keys are mandatory. So, to create a new system, the easiest way is to start from an existing system (and corresponding to the roms you want to include) and to modify only what is strictly necessary:

"fullname" : Allows to give the name of the new system.
"path" : Allows to indicate the directory containing the roms of the new system.
"theme" : Allows you to indicate which theme to use. It is necessary, beforehand, to create this new theme (logo, background, ...)
All the other entries must not be modified.

Here is an example of an addition for a system based on the SNES to include only translated roms:

<?xml version="1.0"?>
<systemList>
<system uuid="21b8873a-a93e-409c-ad0c-8bb6d682bef8" name="snes" fullname="Super Nintendo Fan Trad" platform="snes">
<descriptor path="%ROOT%/snestrad" theme="snestrad" extensions=".smc .sfc .mgd .zip .7z" icon="$0"/>
<scraper screenscraper=""/>
<properties type="console" pad="mandatory" keyboard="no" mouse="optional" lightgun="optional" releasedate="1990-11" retroachievements="1"/>
<emulatorList>
<emulator name="libretro">
<core>snes9x2005</core>
<core>snes9x2010</core>
<core>snes9x2002</core>
</emulator>
</emulatorList>
</system>
</systemList>

5. Add a file to the Themes folder and name it the same as the system. Copy over the _inc file and system.xml file from another theme folder. Add your own artwork to the _inc file labeled the same way.

6. Add a file to the roms folder with the same name as your system. Be sure to add the image folder and media folders as well with the corresponding artwork labeled exactly the same as the rom file.

7. Fire up Recalbox and scrape your system and it will also make a gamelist.

Should be good to go.

Or....can I create a "trackball" virtual system by adding a auto-trackball folder in the themes folder and then add the artwork and create a system.xml file for the folder? The next question is how to create a gamelist to connect games in mame and fbneo..?

Could I add a "trackball" folder to the roms folder with the games and later create a gamelist in recalbox and then also add a "trackball" folder to the themes folder with the artwork would that do it?

Am I barking up the right tree...?

Hi,
I built a 2 player arcade with a trackball. Cant find a virtual system for all trackball games only. Does something like this exist or do I need to make one? If I need to make one...do you know where the files are located for me to add a trackball category?

Thanks

@rastaman1201
Hi here with an update, the trackball works great with Golden Tee now, I just need to tone down the analog sensitivity to the lowest setting.

Hi,

Built a 2 player Arcade with an IPAC2 and Ultimarc U-trac trackball and the trackball is plugged into the IPAC2. I am using Recalbox 8.1.1 for PC. I am trying to get the trackball to work correctly in FBNeo. I changed the controls in the Retroarch menu to Mouse(ball only) and Mouse(full) and the trackball in games like golden tee wont work correctly. Up, down, left, right are all mixed up. Is there a way to calibrate the trackball in retroarch for FBNeo? I was thinking of moving all the trackball games to MAME if I cant get the games to work correctly in FBNeo

Thanks!

@alvin

Thanks for responding

Sorry for posting in the wrong place.

Well I did read up on it and there are a lot of different answers to the question, so I thought I would ask the forum.

Hi,

I am running Recalbox 8 on my PC and I am using a 1 TB SSD. I have it packed with roms with less than a few gigs left. I have read a few different places that you should leave some empty space on your hard drive somewhere around 10% of the space. Is that true?

Thanks

Hi,

I am running Recalbox 8 Electron fro PC and I am trying to get into Mupen64Plus Glide64MK2 to change the screen resolution and controls but the Hotkey key + B button is not letting me into RetroArc like the other emulators do...? No other button combination does either. Is this a RetroArc Core or independent emulator? How do I get into this emulator?

Thanks

@zing

Thanks for the response, oh yeah I know PPSSPP works better, but I have an arcade machine that has a stick and buttons so I have to rearrange the controls and it works for a lot of games, but some I cannot get it to work right. Retroarc makes it easier from that standpoint. So that is why I wanted to try and add it to my setup.

Recalbox rox!

Hi,

I am using the latest version of Recalbox 8 Electron for PC and I was wondering if it was possible to add a PSP core for Rertroarc to emulate PSP roms. I would prefer to use retroarc if possible because it works better on my Arcade machine.

Thanks

The update made the game work! Thanks

But now some Dreamcast games are not working...?

Oh really...ok thanks for letting me know. I will update and let you know.

Thanks for the response.

I checked the Settings - Input - Port Controls 1-4 and they are all mapped as Xbox controllers #1, #2, #3, #4. When I go to Quick Menu - Controls - Port Controls, players #3 and #4 have no buttons assigned and it will not let me add them. Its weird...all of my other 4 player games are working just fine.

I am going to try a new rom file when I have time and see what happens. I will let you know.

Thanks

Sorry forgot to mention I am using fbneo not mame.

I have the max players set to 5. I think I will try a different rom for the game, are there config files for games in other folders that could be causing this? Thanks for your help, I am still a noob at this but learning quickly.

Thanks for the response! Managed to change Metamorphic Force to 4P by flipping the dip switch, but player 3 and 4 controls are not working, and I cannot set the controls up for 3P and 4P in RetroArc? When I try to set joystick/button controls it wont allow me too? I am using 2 IPAC2's for a four player arcade machine I built. Other 4P games work just fine.