I had the same issue. I posted about it yesterday.

Hello all! I set up Moonlight on Recalbox 6,0 and paired without an issue, generated the gameslist without an issue, and the Moonlight menu now appears in ES. When I go to launch a game or Steam, it goes to the loading page and fails back to ES. Nothing happens on the PC side... I pop in my old SD card with the previous version of Recalbox (4.0) and it loads up without issue.

Thoughts? Anyone seeing the same thing?

B*mping this topic as I see this is still an issue in the latest release.

Any thoughts on how to get this controller mapping issue resolved?

Did a fresh etch from the newest image and once Recalbox was up I SSH'd to it and #date gave me the correct time.

It had to be something with the last build, or my SD card... Not sure which, but it is resolved now. Thanks everyone. I so appreciate this community!

It seems to have hung in the same place... I am going to reinstall from scratch. I have been using Recalbox for a couple years now, I have a RPI2 and for Christmas got a RPI3. I can't remember if this was the first load or if it was a load and upgrade on the newest PI, but either way, something is jacked up.

I backed up my ROMs and am going to do a fresh install. If I still see the date issue after I will let you know.

I really appreciate the help and info, you all rule!

Putty sits there at % Total % Received % Xferd Average Speed - No blinking cursor, doesn't look like its doing anything...

I have my ROMS folder pulled, I can just do a fresh image. No biggie... I can do that and let you know if I still see the weird date thing after.

Let me know if you want to try to keep plugging at it or start fresh. I'm OK either way.

looks like its hanging @

login as: root
root@192.168.2.126's password:

bash -x /recalbox/scripts/upgrade/recalbox-upgrade.sh canupgrade

• COMMAND=canupgrade
• [[ -z canupgrade ]]
• BINDIR=/recalbox/scripts/upgrade/
• SYSTEMSETTINGS='python /usr/lib/python2.7/site-packages/configgen/settings/rec alboxSettings.pyc'
• RECALBOX_SYSTEM_DIR=/recalbox/share/system
  ++ cat /recalbox/recalbox.version
• INSTALLED_VERSION=17.12.02
  ++ cat /recalbox/recalbox.arch
• ARCH=rpi3
  ++ python /usr/lib/python2.7/site-packages/configgen/settings/recalboxSettings.p yc -command load -key updates.type
• UPGRADETYPE=stable
• SERVICE_URL=https://recaleur-archive-prod.recalbox.com:9443
  ++ /recalbox/scripts/upgrade//../system/uuid.sh --uuid-file /recalbox/share/syst em/uuid
• UUID=06ac36bf-6776-4102-bb73-773e11328db4
• [[ stable == \b\e\t\a ]]
• [[ stable == \u\n\s\t\a\b\l\e ]]
• '[' canupgrade == canupgrade ']'
• [[ stable == \s\t\a\b\l\e ]]
• /recalbox/scripts/upgrade//recalbox-canupgrade.sh --from-version 17.12.02 --se rvice-url https://recaleur-archive-prod.recalbox.com:9443 --arch rpi3 --uuid 06a c36bf-6776-4102-bb73-773e11328db4
  % Total % Received % Xferd Average Speed

I put the image directly on the SD card myself when 17.12.02 was released from the Recalbox site.

No sir, no VPN.

ping 0.pool.ntp.org

PING 0.pool.ntp.org (162.210.110.4): 56 data bytes
64 bytes from 162.210.110.4: seq=0 ttl=44 time=107.194 ms
64 bytes from 162.210.110.4: seq=1 ttl=44 time=111.607 ms
64 bytes from 162.210.110.4: seq=2 ttl=44 time=115.827 ms
64 bytes from 162.210.110.4: seq=3 ttl=44 time=112.106 ms
64 bytes from 162.210.110.4: seq=4 ttl=44 time=107.803 ms
64 bytes from 162.210.110.4: seq=5 ttl=44 time=106.538 ms
64 bytes from 162.210.110.4: seq=6 ttl=44 time=109.017 ms
64 bytes from 162.210.110.4: seq=7 ttl=44 time=117.462 ms
64 bytes from 162.210.110.4: seq=8 ttl=44 time=106.942 ms
64 bytes from 162.210.110.4: seq=9 ttl=44 time=110.637 ms
64 bytes from 162.210.110.4: seq=10 ttl=44 time=109.292 ms
64 bytes from 162.210.110.4: seq=11 ttl=44 time=121.090 ms
64 bytes from 162.210.110.4: seq=12 ttl=44 time=109.837 ms

--- 0.pool.ntp.org ping statistics ---
14 packets transmitted, 13 packets received, 7% packet loss
round-trip min/avg/max = 106.538/111.180/121.090 ms

looks like it i[censored]ting it just fine.

Not that I am aware of... And I don't think anything changed router-wise recently... Never had this issue before. What can I ping to test if it's being blocked?

Any reason why time would not be syncing? Thoughts? I never had an issue with it before.

It appears that my date and time are very, very wrong on the PI.
"# date Mon Dec 31 20:30:48 EST 1979"

Well well...

Rebooted, re-SSH'd and I got this:

login as: root
root@192.168.2.126's password:

/recalbox/scripts/upgrade/recalbox-upgrade.sh canupgrade

% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
curl: (60) SSL certificate problem: certificate is not yet valid
More details here: https://curl.haxx.se/do

Recalbox on the TV doesn't show anything... Should I just reboot at this point?

I tried that via Putty now... Looks like something is happening, but Putty screen hung, Checking monitoring page, I can see something happening, I will leave it alone for a few and let you know. I backed up my roms folder in case I had to do a fresh install, worst case, I do that.

I will let you know, you're a saint with these lighting fast replies

Sure thing:

login as: root
root@192.168.2.126's password:

ping -c 10 archive.recalbox.com

PING archive.recalbox.com (51.15.201.222): 56 data bytes
64 bytes from 51.15.201.222: seq=0 ttl=50 time=104.398 ms
64 bytes from 51.15.201.222: seq=1 ttl=50 time=124.659 ms
64 bytes from 51.15.201.222: seq=2 ttl=50 time=120.038 ms
64 bytes from 51.15.201.222: seq=3 ttl=50 time=107.741 ms
64 bytes from 51.15.201.222: seq=4 ttl=50 time=115.546 ms
64 bytes from 51.15.201.222: seq=5 ttl=50 time=110.360 ms
64 bytes from 51.15.201.222: seq=6 ttl=50 time=105.998 ms
64 bytes from 51.15.201.222: seq=7 ttl=50 time=110.762 ms
64 bytes from 51.15.201.222: seq=8 ttl=50 time=107.920 ms
64 bytes from 51.15.201.222: seq=9 ttl=50 time=117.864 ms

--- archive.recalbox.com ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max = 104.398/112.528/124.659 ms

Hello!

Wondering if there is any way to force an update on Recalbox. I rebooted it multiple times, tried to swap the config on / off for updating, rebooting the device every time to make sure the configuration stuck, but it won't pick up the update. I am currently on the 17.12.02 release trying to get to the new 18.02.09 one.

Sample below of Update section on my config.

------------ G - UPDATES ------------

Automatically check for updates at start (0,1)

updates.enabled=1

Update type : default to stable

updates.type=stable

I know it's reachable cause I can hit it from my local network, and Kodi picks up PLEX over the internet, so thats working too, connectivity-wise. I have rebooted my router and modem trying to cover all the basics, not sure what is going on, never had an issue with picking up updates before.

Also, I have left this overnight to ensure there was enough time to pick up a broadcast of an update if that was the issue...

Thank you in advance for your help!

So I got a Pi-3 for Christmas and I installed the latest from the site and I saw the splash screen and then a blank screen, then the blank screen with the Recalbox version in the lower left corner of the TV. After thinking it was hanging, and restarting a bunch of times, I did a fresh burn with Etcher and when the second blank screen came up (with the version text in the lower left corner) I left it alone for about 10 minutes (maybe less). It came up and works perfectly. I think the key here is to wait it out on the second screen. There is definitely something happening in the background, its just not presenting the load status on the screen.

Hope this is helpful.

You can use a Wii-Remote in MAME games but the aim / button mapping has problems, will be fixed in next release, per some of the other posts around here.

@substring Understood! Thank you sir!