Posts made by JamieSection23

@substring Thank you, I'll check that out later also

@akh150 said in 8BitDo SNES30 Bluetooth Problem:

@jamiesection23 hello, what do you have? pi2 /pi 3? which version of recalbox? What is the firmware of your controller?

Actually, you just have to hold the power button only for about 3 sec, find your device in the recalbox, then configure it.
Try it several times if it doesn't work directly, sometimes this controller can be hard to find.

Tell us if it's work.

if you understand french, there is a topic on this problem : https://forum.recalbox.com/topic/9380/je-n-arrive-plus-à-appairer-ma-nes-30-pro/89

and maybe few more informations in this post : https://forum.recalbox.com/topic/9394/4-1-bluetooth-pairing-persistency-issue/29

hope it helps.

I'm using the latest update to Recalbox, my pi is a pi2 and the firmware is the most recent on the controller.

I wish I could read French, that would be a great skill. Sadly I can't though.

I'll try holding down the power button and see if that helps. Thank you!

Morning all

Since applying the update I still can't pair my controller. It just says "controller not found" when I try and do it from the selection menu.

Does anyone know how to actually do it or is it still not possible?

Loving the new scraper options - so good!

Great news, thanks for the info. Hopefully my controller will work fine now.

@substring said in 8BitDo SNES30 Bluetooth Problem:

@jamiesection23 may I suggest you wait for 13th of October ?

Yeah sure, shall do. Thank you for the reply.

Afternoon all.

I've tried to pair my new SNES30 (with up to date firmware) to Recalbox. It finds the pad and displays it's address (rather than it's name) but then when selected, Recalbox either crashes totally or carries on as normal but the controller doesn't work unless it's connected with it's USB cable.

Could anyone help please? I'm a bit new to this!