Hello,
is it possible to use both analogue sticks as analogue-to-digital devices at the same time?
All I know is the retroarch setting to use either the right or left stick or none, but not both.
Would be very nice.
Posts made by Bloodsurfer
-
Possible using both analogue sticks as digital device?
-
RE: Turbo Funktion einstellen? Schneller oder Langsamer
Ich bin damit in letzter Zeit auch beschäftigt. Selbes Board, auch der 3b+. Es wird wohl an der fehlenden/begrenzten Leistung liegen. Die Geschwindigkeit im Menü ist nur das Maximum, was ich dort einstelle wird nie erreicht. Die Tipps wie das Deaktivieren vom Zurückspulen und Shader, Übertakten usw. helfen alle nur minimal.
Auch Corewechsel bringt keinen spürbaren Unterschied (nehme normalerweise snes9x).
Bei NES Roms läuft der Turbo wirklich superschnell, bei SNES leider in der Regel höchstens zweifache Geschwindigkeit. -
RE: Aussteigen aus Spielen mit einem SNES - Controller
Hallo,
Du musst den Controller wohl zuerst noch konfigurieren und dabei einen Hotkey festlegen. Zum Verlassen des Spiels dann den Hotkey plus Start drücken. In der Regel empfiehlt sich bei einem Controller im SNES Layout ohne zusätzliche Buttons die Select Taste als Hotkey, dann bist du wieder bei Start+Select. -
RE: Controller freezes or loses connection when entering retroarch menu
Hello,
yes, the current firmware (1.33) is already installed.
I start it using Start + B, which means Dinput mode. That's the one which was working fine before. -
Reconfiguring inputs by config file doesn't work right anymore
I'm using config files in \\recalbox\share\system\configs\retroarch\nes<rom>.nes.cfg mostly to swap the A and B buttons for some games and to reconfigure the hotkey buttons, so I can fast forward by pressing hotkey + R2 for example.
This was working fine in older versions before 6.0, it is no longer working correctly in 6.1.1.
The config files look like this:
input_player1_a_btn = 1
input_player1_b_btn = 0input_hold_fast_forward_btn = 9
input_rewind_btn = 8
input_shader_next_btn = 7
input_shader_prev_btn = 6menu_swap_ok_cancel_buttons = "false"
What happens now when I press hotkey + R2 is, it does not only fast forward but also switches the shaders. So it is performing its original function as well as the new function I assigned via the config file.
Has anything been changed regarding this feature, do I have to change something in the config files?
-
Controller freezes or loses connection when entering retroarch menu
I'm using an 8bitdo SF30 Pro controller as well as a PS3 pad.
Everything works fine when I start up a game, but as soon as I enter the retroarch menu by pressing hotkey + B, the controller freezes. It does not lose the connection, but no button shows any reaction anymore.
When I then disconnect the controller and connect it again, it does work again, but not correctly. When I press up/down to choose an option, it does not go to the next menu item but skips five or six of them at a time. So the menu is unusable.
When I exit the menu, the controller freezes again.Do you guys have any idea what is causing this and if I can do anything to solve it?
It was working fine in earlier versions before 6.0. I'm now using 6.1.1 on a 3B+. -
RE: Startup Script IndentationError
Die Zeilen hinter den try und catch Anweisungen müssen jeweils eingerückt werden (mit einem Tab oder 4 Leerzeichen)
-
RE: Feature Request: Sync or Upload game saves to Dropbox
There is a custom solution for this already: https://forum.recalbox.com/topic/13840/tutorial-how-to-sync-saves-roms-to-the-cloud
-
RE: [Recalbox 9] Theme Next Pixel
Thanks again for your amazing work!
I'll install it tomorrow as soon as 6.0 is released. I'm still very happy with your theme, really loving it! -
RE: RecalBox does not work after the upgrade.
The lightning icon usually means that the power supply is not strong enough for the Raspberry.
The first startup after the setup does take a bit longer than normal, because the OS is resizing the partitions on the SD card at first boot. This might take a minute or two depending on the card speed and size,so maybe you just need to wait a little bit longer.
-
RE: [Recalbox 9] Theme Next Pixel
I recently noticed that the "scrolling" direction (for lack of a better word to describe it) feels kind of wrong when using the vertical wheel.
For example, if I'm currently seeing the SNES system view, the NES is showing up two position down the wheel. Now my natural behavior when wanting to change to the NES is pressing the "down" button twice. What this does is the opposite of what I would expect, it moves upwards, away from where I wanted to go.
Now this could be only my expectation, but if I remember correctly the recalbox-next wheel does the exact opposite of this, as do most other themes with wheel support.
How would you feel about changing this or maybe making it a configuration parameter in the next release? Or is it really only me thinking this?
-
RE: [Recalbox 9] Theme Next Pixel
Thank you so much for this amazing work! Just installed and looked at the new version. This is in my opinion THE most beautiful theme there is right now.
-
RE: [Recalbox 9] Theme Next Pixel
Wow, that already looks amazing!
I have too ask, since you are doing this fantastic work, are you doing something like this professionally , e.g. graphics design? You definitely seem to be very talented.
Could I wish for an alternative image and sound for the SNES? I was thinking of Final Fantasy VI. It's one of the best 16 bit rpgs ever made and Terra's theme is such an iconic and wonderful masterpiece in scores.
https://youtu.be/a6t_uyg_pF8
It might be one of the greatest video game sound tracks ever made. -
RE: [Recalbox 9] Theme Next Pixel
@myst said in Next Pixel theme:
Benhind the scene i've worked a lot on my source files to get ready for an eventual right vertical wheel (hopefully it may come out next release).
That's great news, thank you so much for all the work you are putting into this!
-
RE: [Recalbox 9] Theme Next Pixel
@myst I think vertical wheel is the most beautiful and stylish (but that's only my opinion)
-
RE: [Recalbox 9] Theme Next Pixel
@myst said in Next Pixel theme:
though only horizontal view is available for now.
Do you have plans for integrating a vertical view with wheel support in the future?
-
RE: Installing Recalbbox x86 from DVD possible
If you don't have a second system around, you could also boot the target system using any live Linux distribution available on CD or DVD, e.g. Debian or Ubuntu.
Then within that running Linux system, download the recalbox image and burn it (with etcher or any tool you like) onto the hard disk. -
RE: Hat schon wer die neueste Version für den Raspi B3+ an laufen?
Ja, ich glaube das wurde auch im englischen Thread zur Beta erwähnt. Zum Scrapen werden meistens die externen Tools empfohlen, welche auch viel schneller arbeiten als der interne Scraper.
Ich würde das fastscraper.bat Script empfehlen:
https://github.com/paradadf/recaltools/tree/master/fastscraper