Posts made by arne

@zing I'm a little confused as the RPi1 and Pi zero still appear to currently be supported at 8.1.1 but with much lesser hardware? But not RPi2 ?

I don't understand?

@zing OK thanks I suspected that was the case.

Is there a reason Rpi2 does not support the current version Recalbox 8.1?

Will the Rpi2 also not support future versions of Recalbox? Thanks

@alvin OK thanks

After many reboots it seems the issue has finally cleared itself and the system now seems stable.

I have now noticed another issue that the system shows no updates available. Why is the 8.0.2 update not showing?

Hi, RPi2 running RB8.0.1 was working ok until I decided to try overclocking to see the difference. Set to the first OC level I think 1050Mhz to see. Since then the system is completely unstable (sometimes does not complete boot). I am unable to access the system menu to revert back to standard (it crashes). Can I edit the config file via ssh etc to correct the issue or what else do I do? Thanks.

Hi, Recalbox 7.2.2 installed.

I'm trying to set Static IP following instructions here for v6.1 https://recalbox.gitbook.io/documentation/tutorials/network/ip/manual-ip-settings

I edited the recalbox.conf file but the IP remains dhcp and also breaks the hostname which reverts to RECALBOX.

Any ideas? Thanks.

The fan speed is Pulse Width Modulation (PWM) controlled on GPIO14. This is software controlled by the system so the software will need to support this.

I'll order one to test and will report back.

@zing Hi Thanks.

My understanding is that the fan speed is controlled by output on GPIO 14. Is it possible that this will work?

HI,
Does the current version of Recalbox support temperature control with the official Raspberry case fan?

https://www.raspberrypi.org/products/raspberry-pi-4-case-fan/

Hi, I have an issue on Rpi2 Recalbox 7.2 that PSX and Nintendo64 games are windowed but I'm sure they used to be stretched to full screen (720p) on a previous install.

I looked for the setting to fix this but didn't find it.

How do I fix this? Thanks.

Hi,

I'm happy to report that the new install had no problems and it seems that all the data/saves also transferred ok.

One issue is that PSX and Nintendo64 games are now windowed but used to be full screen (720p). Thats the only systems the kids use.

I looked for a setting to fix this but didn't find it.

How do I fix this? Thanks.

Hi, I have an RPi2 running Recalbox v18.07.13 that I am planning to upgrade to v7.2.

The system is currently on a 64GB SD card and I have another 64GB SD card to do a fresh install of v7.2.

I will obviously need to transfer the BIOS and ROMS folders but what else do I need to transfer so that all levels and achievements etc are retained?

SAVES folder?

The kids will kill me if they lose where they are up to in their games.

Thanks.

Hi, I've got an RPi2 and a Realtek RTL8811AU wifi dongle.
Is this currently supported?
Thanks

Hi, now that RPi4 is supported by Recalbox I looked at the 'DIY recalbox' page for the current hardware recommendations but this page has not yet been updated. Is RPi4 internal wifi and bluetooth fully supported or are dongles still required? Thanks

Hi

OK thank-you I'll give it a try.

Thanks.

Hi,

I have a RaspPi 2 with 64GB SD card running the last version of Recalbox before Dragonblaze.

I would like to update to Dragonblaze and my understanding is that I will need to do a fresh install.

What is the best method of backing up and restoring the stored games and game data?

Thanks.

@tikiandskull Hi, I received the suggested USB-PSx adaptor today and I've tested it and it works OOB as you said. Thanks for your help

@tikiandskull Thanks, I have ordered your suggested adaptor Clearly my current adaptor is not yet supported. I will report back progress.

Merci

@tikiandskull Hi, Thanks but it did not work for me I connected my USB-PS Adaptor (Device Name: PS3/PC Gamepad, Product ID: 0x0523, Vendor ID: 0x2563, Manufacturer: ShanWan) to a PS1 Dualshock controller as a test with Recalbox 4.0.

It did not work. Perhaps this particular adaptor is not supported? Any ideas?

Thanks