Unsolved slow, braking system

[Edvis]

@rockaddicted

@jeevuz said in slow, braking system:

@Edvis Hi you use crt tv? I have the same problem onli in crt tv, hdmi works great.

[Edvis]

@substring

@jeevuz said in slow, braking system:

@Edvis Hi you use crt tv? I have the same problem onli in crt tv, hdmi works great.

[Substring]

@edvis So you have problems since you're on CRT ? Well, @jeevuz hada great idea ! How are you connected ? Do you have "really many" roms ? where do the slowdowns happen ? Can you make a support archive by going to http://recalbox/help ?

[Edvis]

@substring There is no difference how many Roms, on one sd card there are Roms, on the second sd card only standard roms. the problem is the same. the problem arises immediately at boot, the cross triangle and the square are rotated slowly and the sound is slow. slow sound in the menu and slow games. Yes I use crt tv.
your link http://recalbox/help does not open

[Edvis]

@substring
slow in all Roms

[rockaddicted]

Guys if you are using an "exotic" setup you must tell us. Crt screen on composite is about 1% of users.
Anyway, it is a good point to catched that.
To be able to on this address your rpi must be connected on your local network.
You can generate manually an archive support by ssh.
Please look this wiki: https://github.com/recalbox/recalbox-os/wiki/Recalbox-support-(EN)

[Substring]

@edvis you need to connect your Pi to the Network. If you're using a mac then try http://recalbox.local/help

I have used a 4.1 on CRT using the composite cable, had absolutely no problem. So can you detail your full setup ?

[rockaddicted]

I'm using too a 4.1 plugged on rca to my car screen to play mario kart while driving, and no issue.

[voljega]

@rockaddicted except when you see a blue shell coming at you in the rear window

[Edvis]

@substring https://file.ac/PqcTAmt1ESU/

[Substring]

@edvis Could you comment audio_pwm_mode=2 in your config.txt and reboot ?

[Edvis]

@substring I'm shocked, wow, everything worked, thank you very much.

[Substring]

@edvis i remember i had the problem with this parameter, but i also had some crap connected to the GPIO AFAIR. Should dig this further though, if we're not on a firmware bug or god knows what

[rockaddicted]

Once we have all informations we can debug properly

[Edvis]

@substring clearly, thank you very much)))

[Edvis]

@jeevuz

@substring said in slow, braking system:

@edvis Could you comment audio_pwm_mode=2 in your config.txt and reboot ?

[Edvis]

@rockaddicted

[jeevuz]

#audio_pwm_mode=2 perfect!!!!!! it works like a charm thx.

[vbu]

Old thread, but for the few who still use composite output in recalbox 6.0, where audio_pwm_mode=2 doesn't exist anymore, now works fine with audio_pwm_mode=0. At least in my RPi3.