impossible d'avoir un grand écran



  • Bonjour,
    je vous demande de l'aide car il m'est impossible d'avoir mes jeux sur la totalité de mon écran (grande télévision), il semble que cela ne fonctionne uniquement pour le menu général. Dès que je selectionne un jeu l'ecran est très réduit...
    J'ai pourtant modifié mon recalbox.conf (voir ci-dessous ) et le fichier /boot/config.txt
    Je ne comprends pas, quelqu'un peut-il m'aider?
    Merci d'avance.

    Voici le fichier recalbox.conf:

    System Variable

    You can configure your recalbox from here

    To set a variable, remove the first ; on the line

    ------------ A - System Options -----------

    Recalbox Manager (http manager)

    system.manager.enabled=1

    Recalbox API (REST)

    system.api.enabled=0

    EmulationStation menu style

    default -> default all options menu

    none -> no menu except the game search menu

    bartop -> less menu, only needed for bartops

    system.es.menu=default

    Emulator special keys

    default -> default all special keys

    nomenu -> cannot popup the emulator menu

    none -> no special keys in emulators

    system.emulators.specialkey=default

    Show or hide kodi in emulationstation (0,1)

    kodi.enabled=1

    Start kodi at launch (0,1)

    kodi.atstartup=0

    set x button shortcut (0,1)

    kodi.xbutton=1

    Kodi can wait for a network component before starting

    waithost is the ip or hostname that must answer to a ping to validate the availability

    waittime is the maximum time waited when kodi boots

    if waitmode is required, kodi will not start if the component is not available

    if waitmode is wish, kodi will start if the component is not available

    if waitmode is not set or has an other value, kodi will start immediatly

    ;kodi.network.waitmode=required
    ;kodi.network.waittime=10
    ;kodi.network.waithost=192.168.0.50

    ------------ B - Network ------------

    Set system hostname

    system.hostname=RECALBOX

    Activate wifi (0,1)

    wifi.enabled=1

    Wifi SSID (string)

    wifi.ssid=mywifi

    Wifi KEY (string)

    wifi.key=key

    Samba share

    system.samba.enabled=1

    Virtual Gamepads

    system.virtual-gamepads.enabled=1

    SSH

    system.ssh.enabled=1

    ------------ C - Audio ------------

    Set the audio device (auto, hdmi, jack)

    audio.device=auto

    Set system volume (0..100)

    audio.volume=86

    Enable or disable system sounds in ES (0,1)

    audio.bgmusic=0

    -------------- D - Controllers -----------------

    Enable support for standard bluetooth controllers

    controllers.bluetooth.enabled=1

    Please enable only one of these

    -------------- D1 - PS3 Controllers ------------

    ##Enable PS3 controllers support
    controllers.ps3.enabled=1

    Choose an driver beetween official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)

    controllers.ps3.driver=official

    ------------ D2 - XBOX Controllers ------------

    Xbox controllers are already supported, but xboxdrv can solve some compatibility issues

    Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)

    controllers.xboxdrv.enabled=0

    Set the amount of controllers to use with xboxdrv (0..4)

    controllers.xboxdrv.nbcontrols=2

    ------------ D3 - GPIO Controllers ------------

    GPIO Controllers

    enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)

    controllers.gpio.enabled=0

    mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)

    controllers.gpio.args=map=1,2

    DB9 Controllers

    Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)

    controllers.db9.enabled=0

    db9 arguments

    controllers.db9.args=map=1

    Gamecon controllers

    Enable gamecon controllers, for nes, snes psx (0,1)

    controllers.gamecon.enabled=0

    gamecon_args

    controllers.gamecon.args=map=1

    XGaming's XArcade Tankstik and other compatible devices

    controllers.xarcade.enabled=0

    ------------ F - Language and keyboard ------------

    Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)

    system.language=fr_FR

    set the keyboard layout (fr,en,de,us,es)

    system.kblayout=fr

    Set you local time

    Select your timezone from : ls /usr/share/zoneinfo/ (string)

    system.timezone=Europe/Paris

    ------------ G - UPDATES ------------

    Automatically check for updates at start (0,1)

    updates.enabled=1

    default : stable ; set to unstable to get the next version currently beeing tested. set to nightly at your own risk to get the developpment version.

    updates.type=stable

    ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------

    The global value will be used for all emulators, exept if the value

    is redifined in the emulator

    Set game resolution for emulators

    select your mode from the command : tvservice -m [MODE]

    CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced

    CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive

    use 'default' for using the default resolution

    (string)

    global.videomode=CEA 5 HDMI

    Shader set

    Automatically select shaders for all systems

    ## (none, retro, scanlines)
    global.shaderset=none

    Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)

    global.shaders=

    Set ratio for all emulators (auto,4/3,16/9,16/10,custom)

    global.ratio=auto

    Set smooth for all emulators (0,1)

    global.smooth=1

    Set rewind for all emulators (0,1)

    global.rewind=1

    Set autosave/load savestate for all emulators (0,1)

    global.autosave=1

    Enable retroarchievements (0,1)

    Set your www.retroachievements.org username/password

    global.retroachievements=0
    global.retroachievements.username=
    global.retroachievements.password=

    Set retroarch input driver (auto, udev, sdl2)

    If you don't have issues with your controllers, let auto

    global.inputdriver=auto

    If you do not want recalboxOS to generate the configuration for all emulators (string)

    ;global.configfile=/path/to/my/configfile.cfg

    ------------ I - EMULATORS CHOICES -----------

    You can override the global configuration here

    Here is the snes example

    snes.videomode=CEA 5 HDMI
    snes.core=snes9x_next
    ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
    ;snes.ratio=16/9
    ;snes.smooth=0
    ;snes.rewind=1
    ;snes.autosave=0
    ;snes.emulator=libretro

    If you do not want recalboxOS to generate the configuration for the emulator :

    ;snes.configfile=/path/to/my/configfile.cfg

    Default cores for RPi2

    snes.core=snes9x_next
    gba.core=mgba
    mame.core=mame078
    nes.core=fceunext

    The rewind option is deactivated by default on these unsupported cores (don't edit please)

    virtualboy.rewind=0
    sega32x.rewind=0
    segacd.rewind=0
    psx.rewind=0
    fbalibretro.rewind=0
    vectrex.rewind=0

    NeoGeo emulator

    You can use pifba or a libretro core (fba2x,libretro)

    neogeo.emulator=libretro

    If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)

    neogeo.core=fba

    N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)

    So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).

    If your screen is not compatible with one of these video modes, please check the recalbox's wiki.

    n64.videomode=DMT 4 HDMI

    If you are using a CRT screen, please change the setting above with this one :

    n64.videomode=default

    global.integerscale=1


  • Moderator
    Team

    Aucun jeu n'est en plein ecran puisque le 16/9 n'existait pas à cette époque



  • Il est donc impossible d'avoir l'image en plein ecran sur une television full hd?



  • @Substring il est donc impossible d'avoir l'image en plein ecran sur une tv full hd?


  • Moderator
    Team

    Tu peux force le ratio 16/9 au lieu de le mettre en auto, et laisser l'émulateur gérer lui même son ratio en fonction du ratio d'origine du hardware émulé.
    Mais tu aura une image déformée.



  • @rockaddicted merci pour ta réponse. J'ai testé et effectivement cela semble un peu plus grand.
    Ma question va paraître peut-être bête mais lorsqu'on branche la recalbox sur un écran d'ordianateur, n'est-ce pas en plein écran?


  • Moderator
    Team

    @hmid_30 la reponse simple est non.

    La réponse compliquée : ca va multiplier la résolution d'origine par un facteur d'echelle en gardant le le ration largeur/hauteur d'origine. Et encore ... Led resolutions d'origine n'etaient pas du 4/3, donc les tv etiraient l'image pour avoir du 4/3 plein ecran (à peu près)



  • @Substring merci beaucoup pour ta réponses et votre réactivité!


Log in to reply
 

Want to support us ?

Join us on :

232
Online

28109
Users

14403
Topics

109030
Posts

Looks like your connection to Recalbox Forum was lost, please wait while we try to reconnect.