impossible d'avoir un grand écran

hmid_30 · 23 Jul 2017, 15:22

Bonjour,
je vous demande de l'aide car il m'est impossible d'avoir mes jeux sur la totalité de mon écran (grande télévision), il semble que cela ne fonctionne uniquement pour le menu général. Dès que je selectionne un jeu l'ecran est très réduit...
J'ai pourtant modifié mon recalbox.conf (voir ci-dessous ) et le fichier /boot/config.txt
Je ne comprends pas, quelqu'un peut-il m'aider?
Merci d'avance.

Voici le fichier recalbox.conf:

System Variable

You can configure your recalbox from here

To set a variable, remove the first ; on the line

------------ A - System Options -----------

Recalbox Manager (http manager)

system.manager.enabled=1

Recalbox API (REST)

system.api.enabled=0

EmulationStation menu style

default -> default all options menu

none -> no menu except the game search menu

bartop -> less menu, only needed for bartops

system.es.menu=default

Emulator special keys

default -> default all special keys

nomenu -> cannot popup the emulator menu

none -> no special keys in emulators

system.emulators.specialkey=default

Show or hide kodi in emulationstation (0,1)

kodi.enabled=1

Start kodi at launch (0,1)

kodi.atstartup=0

set x button shortcut (0,1)

kodi.xbutton=1

Kodi can wait for a network component before starting

waithost is the ip or hostname that must answer to a ping to validate the availability

waittime is the maximum time waited when kodi boots

if waitmode is required, kodi will not start if the component is not available

if waitmode is wish, kodi will start if the component is not available

if waitmode is not set or has an other value, kodi will start immediatly

;kodi.network.waitmode=required
;kodi.network.waittime=10
;kodi.network.waithost=192.168.0.50

------------ B - Network ------------

Set system hostname

system.hostname=RECALBOX

Activate wifi (0,1)

wifi.enabled=1

Wifi SSID (string)

wifi.ssid=mywifi

Wifi KEY (string)

wifi.key=key

Samba share

system.samba.enabled=1

Virtual Gamepads

system.virtual-gamepads.enabled=1

SSH

system.ssh.enabled=1

------------ C - Audio ------------

Set the audio device (auto, hdmi, jack)

audio.device=auto

Set system volume (0..100)

audio.volume=86

Enable or disable system sounds in ES (0,1)

audio.bgmusic=0

-------------- D - Controllers -----------------

Enable support for standard bluetooth controllers

controllers.bluetooth.enabled=1

Please enable only one of these

-------------- D1 - PS3 Controllers ------------

##Enable PS3 controllers support
controllers.ps3.enabled=1

Choose an driver beetween official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)

controllers.ps3.driver=official

------------ D2 - XBOX Controllers ------------

Xbox controllers are already supported, but xboxdrv can solve some compatibility issues

Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)

controllers.xboxdrv.enabled=0

Set the amount of controllers to use with xboxdrv (0..4)

controllers.xboxdrv.nbcontrols=2

------------ D3 - GPIO Controllers ------------

GPIO Controllers

enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)

controllers.gpio.enabled=0

mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)

controllers.gpio.args=map=1,2

DB9 Controllers

Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)

controllers.db9.enabled=0

db9 arguments

controllers.db9.args=map=1

Gamecon controllers

Enable gamecon controllers, for nes, snes psx (0,1)

controllers.gamecon.enabled=0

gamecon_args

controllers.gamecon.args=map=1

XGaming's XArcade Tankstik and other compatible devices

controllers.xarcade.enabled=0

------------ F - Language and keyboard ------------

Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)

system.language=fr_FR

set the keyboard layout (fr,en,de,us,es)

system.kblayout=fr

Set you local time

Select your timezone from : ls /usr/share/zoneinfo/ (string)

system.timezone=Europe/Paris

------------ G - UPDATES ------------

Automatically check for updates at start (0,1)

updates.enabled=1

default : stable ; set to unstable to get the next version currently beeing tested. set to nightly at your own risk to get the developpment version.

updates.type=stable

------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------

The global value will be used for all emulators, exept if the value

is redifined in the emulator

Set game resolution for emulators

select your mode from the command : tvservice -m [MODE]

CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced

CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive

use 'default' for using the default resolution

(string)

global.videomode=CEA 5 HDMI

Shader set

Automatically select shaders for all systems

## (none, retro, scanlines)
global.shaderset=none

Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)

global.shaders=

Set ratio for all emulators (auto,4/3,16/9,16/10,custom)

global.ratio=auto

Set smooth for all emulators (0,1)

global.smooth=1

Set rewind for all emulators (0,1)

global.rewind=1

Set autosave/load savestate for all emulators (0,1)

global.autosave=1

Enable retroarchievements (0,1)

Set your www.retroachievements.org username/password

global.retroachievements=0
global.retroachievements.username=
global.retroachievements.password=

Set retroarch input driver (auto, udev, sdl2)

If you don't have issues with your controllers, let auto

global.inputdriver=auto

If you do not want recalboxOS to generate the configuration for all emulators (string)

;global.configfile=/path/to/my/configfile.cfg

------------ I - EMULATORS CHOICES -----------

You can override the global configuration here

Here is the snes example

snes.videomode=CEA 5 HDMI
snes.core=snes9x_next
;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
;snes.ratio=16/9
;snes.smooth=0
;snes.rewind=1
;snes.autosave=0
;snes.emulator=libretro

If you do not want recalboxOS to generate the configuration for the emulator :

;snes.configfile=/path/to/my/configfile.cfg

Default cores for RPi2

snes.core=snes9x_next
gba.core=mgba
mame.core=mame078
nes.core=fceunext

The rewind option is deactivated by default on these unsupported cores (don't edit please)

virtualboy.rewind=0
sega32x.rewind=0
segacd.rewind=0
psx.rewind=0
fbalibretro.rewind=0
vectrex.rewind=0

NeoGeo emulator

You can use pifba or a libretro core (fba2x,libretro)

neogeo.emulator=libretro

If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)

neogeo.core=fba

N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)

So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).

If your screen is not compatible with one of these video modes, please check the recalbox's wiki.

n64.videomode=DMT 4 HDMI

If you are using a CRT screen, please change the setting above with this one :

n64.videomode=default

global.integerscale=1

Substring · 23 Jul 2017, 17:09

Aucun jeu n'est en plein ecran puisque le 16/9 n'existait pas à cette époque

hmid_30 · 23 Jul 2017, 17:19

Il est donc impossible d'avoir l'image en plein ecran sur une television full hd?

hmid_30 · 23 Jul 2017, 17:21

@Substring il est donc impossible d'avoir l'image en plein ecran sur une tv full hd?

rockaddicted · 23 Jul 2017, 17:32

Tu peux force le ratio 16/9 au lieu de le mettre en auto, et laisser l'émulateur gérer lui même son ratio en fonction du ratio d'origine du hardware émulé.
Mais tu aura une image déformée.

hmid_30 · 23 Jul 2017, 19:32

@rockaddicted merci pour ta réponse. J'ai testé et effectivement cela semble un peu plus grand.
Ma question va paraître peut-être bête mais lorsqu'on branche la recalbox sur un écran d'ordianateur, n'est-ce pas en plein écran?

Substring · 23 Jul 2017, 20:32

@hmid_30 la reponse simple est non.

La réponse compliquée : ca va multiplier la résolution d'origine par un facteur d'echelle en gardant le le ration largeur/hauteur d'origine. Et encore ... Led resolutions d'origine n'etaient pas du 4/3, donc les tv etiraient l'image pour avoir du 4/3 plein ecran (à peu près)

hmid_30 · 23 Jul 2017, 21:24

@Substring merci beaucoup pour ta réponses et votre réactivité!