Recalbox Menü immer nur in 640x480



  • Moin zusammen,

    Das Recalbox Menü ist bei mir immer in der Auflösung 640x480.
    Spiele werden aber immer in der richtigen Auflösung gestartet.

    Der Monitor unterstützt eine max Auflösung von 1600x1200.

    Hier meine Configs.
    config.txt:

    # uncomment if you get no picture on HDMI for a default "safe" mode
    hdmi_safe=1
    
    disable_overscan=1
    
    # uncomment to force a specific HDMI mode (this will force VGA)
    hdmi_group=2
    hdmi_mode=51
    
    # comment to get jack audio
    #hdmi_drive=1
    
    config_hdmi_boost=4
    
    # force hdmi while the tv can take time before sending the signal on the hdmi output
    #hdmi_force_hotplug=1
    
    # uncomment for composite PAL
    #sdtv_mode=2
    
    # uncomment for lirc-rpi
    #dtoverlay=lirc-rpi
    
    # if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or give a low resolution because tv had no enough time to initialize it
    boot_delay=3
    
    # uncomment if you don't want the rainbow at startup
    disable_splash=1
    
    # Overclock
    gpu_mem_256=128
    gpu_mem_512=256
    gpu_mem_1024=512
    
    avoid_safe_mode=1
    
    kernel=zImage
    
    # NOOBS Auto-generated Settings:
    hdmi_force_hotplug=1
    hdmi_force_hotplug=1
    hdmi_ignore_edid=0xa5000080
    config_hdmi_boost=4
    hdmi_group=2
    hdmi_mode=4
    disable_overscan=0
    overscan_left=24
    overscan_right=24
    overscan_top=24
    overscan_bottom=24
    

    recalbox.conf:

    # System Variable
    # You can configure your recalbox from here
    # To set a variable, remove the first ; on the line
    
    
    
    # ------------ A - System Options ----------- #
    #    Uncomment the system.power.switch you use
    ;system.power.switch=ATX_RASPI_R2_6      # http://lowpowerlab.com/atxraspi/#installation
    ;system.power.switch=MAUSBERRY           # http://mausberry-circuits.myshopify.com/pages/setup
    ;system.power.switch=REMOTEPIBOARD_2003  # http://www.msldigital.com/pages/support-for-remotepi-board-2013
    ;system.power.switch=REMOTEPIBOARD_2005  # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
    ;system.power.switch=PIN56ONOFF          # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
    ;system.power.switch=PIN56PUSH           # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
    ;system.power.switch=PIN356ONOFFRESET    # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
    
    ## Recalbox Manager (http manager)
    system.manager.enabled=1
    
    ## Recalbox API (REST)
    system.api.enabled=0
    
    ## EmulationStation menu style
    ## default -> default all options menu
    ## none -> no menu except the game search menu
    ## bartop -> less menu, only needed for bartops
    system.es.menu=default
    
    ## Emulator special keys
    ## default -> default all special keys
    ## nomenu -> cannot popup the emulator menu
    ## none -> no special keys in emulators
    system.emulators.specialkeys=default
    
    ## Show or hide kodi in emulationstation (0,1)
    kodi.enabled=0
    ## Start kodi at launch (0,1)
    kodi.atstartup=0
    ## set x button shortcut (0,1)
    ##kodi.xbutton=1
    
    ## Kodi can wait for a network component before starting
    ## waithost is the ip or hostname that must answer to a ping to validate the availability
    ## waittime is the maximum time waited when kodi boots
    ## if waitmode is required, kodi will not start if the component is not available
    ## if waitmode is wish, kodi will start if the component is not available
    ## if waitmode is not set or has another value, kodi will start immediately
    ;kodi.network.waitmode=required
    ;kodi.network.waittime=10
    ;kodi.network.waithost=192.168.0.50
    
    # ------------ B - Network ------------ #
    ## Set system hostname
    system.hostname=RECALBOX
    ## Activate wifi (0,1)
    wifi.enabled=1
    ## Wifi SSID (string)
    wifi.ssid=****
    ## Wifi KEY (string)
    ## Escape your special chars (# ; $) with a backslash : $ => \$
    wifi.key=****
    ## Samba share
    system.samba.enabled=1
    ### Virtual Gamepads
    system.virtual-gamepads.enabled=1
    ### SSH
    system.ssh.enabled=1
    
    # ------------ C - Audio ------------ #
    ## Set the audio device (auto, hdmi, jack)
    audio.device=jack
    ## Set system volume (0..100)
    audio.volume=100
    ## Enable or disable system sounds in ES (0,1)
    audio.bgmusic=1
    
    
    
    # -------------- D - Controllers ----------------- #
    # Enable support for standard bluetooth controllers
    controllers.bluetooth.enabled=1
    
    
    ## Please enable only one of these
    # -------------- D1 - PS3 Controllers ------------ #
    ##Enable PS3 controllers support
    controllers.ps3.enabled=1
    ## Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
    controllers.ps3.driver=official
    
    
    # ------------ D2 - XBOX Controllers ------------ #
    ## Xbox controllers are already supported, but xboxdrv can solve some compatibility issues
    ## Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)
    controllers.xboxdrv.enabled=0
    ## Set the amount of controllers to use with xboxdrv (0..4)
    controllers.xboxdrv.nbcontrols=2
    
    
    # ------------ D3 - GPIO Controllers ------------ #
    ## GPIO Controllers
    ## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
    controllers.gpio.enabled=0
    ## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
    controllers.gpio.args=map=1,2
    
    
    ## DB9 Controllers
    ## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
    controllers.db9.enabled=0
    ## db9 arguments
    controllers.db9.args=map=1
    
    ## Gamecon controllers
    ## Enable gamecon controllers, for nes, snes psx (0,1)
    controllers.gamecon.enabled=0
    ## gamecon_args
    controllers.gamecon.args=map=1
    
    ## XGaming's XArcade Tankstik and other compatible devices
    controllers.xarcade.enabled=1
    
    
    
    # ------------ F - Language and keyboard ------------ #
    ## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
    system.language=de_DE
    ## set the keyboard layout (fr,en,de,us,es)
    ;system.kblayout=us
    ## Set you local time
    ## Select your timezone from : ls /usr/share/zoneinfo/ (string)
    ;system.timezone=Europe/Paris
    
    
    
    # ------------ G - UPDATES ------------ #
    ## Automatically check for updates at start (0,1)
    updates.enabled=0
    # default : stable ; set to beta to get the next version currently being tested. set to unstable at your own risk to get the development version.
    updates.type=stable
    
    
    # ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ #
    ## The global value will be used for all emulators, except if the value
    ## is redefined in the emulator
    
    ## Set game resolution for emulators
    ## select your mode from the command : tvservice -m [MODE]
    ## CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced
    ## CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive
    ## use 'default' for using the default resolution
    ## (string)
    global.videomode=DMT 51 HDMI
    
    ## Shader set
    ## Automatically select shaders for all systems
    ## (none, retro, scanlines)
    global.shaderset=retro
    
    ## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
    global.integerscale=1
    
    ## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
    global.shaders=
    
    ## Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
    global.ratio=4/3
    
    ## Set smooth for all emulators (0,1)
    global.smooth=1
    
    ## Set rewind for all emulators (0,1)
    global.rewind=1
    
    ## Set autosave/load savestate for all emulators (0,1)
    global.autosave=0
    
    ## Enable retroarchievements (0,1)
    ## Set your www.retroachievements.org username/password
    ## Escape your special chars (# ; $) with a backslash : $ => \$
    global.retroachievements=0
    global.retroachievements.username=
    global.retroachievements.password=
    
    ## Set retroarch input driver (auto, udev, sdl2)
    ## If you don't have issues with your controllers, let auto
    global.inputdriver=auto
    
    ## If you do not want recalboxOS to generate the configuration for all emulators (string)
    ;global.configfile=/path/to/my/configfile.cfg
    
    # ------------ I - EMULATORS CHOICES ----------- #
    ## You can override the global configuration here
    ## Here is the snes example
    ;snes.videomode=DMT 51 HDMI
    snes.core=snes9x_next
    ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
    ;snes.ratio=4/3
    ;snes.smooth=0
    ;snes.rewind=1
    ;snes.autosave=0
    ;snes.emulator=libretro
    ;snes.integerscale=0
    ## If you do not want recalboxOS to generate the configuration for the emulator :
    ;snes.configfile=/path/to/my/configfile.cfg
    
    ## Default cores for RPi3
    snes.core=snes9x_next
    gba.core=mgba
    mame.core=default
    nes.core=fceunext
    
    ## NeoGeo emulator
    ## You can use pifba or a libretro core (fba2x,libretro)
    neogeo.emulator=libretro
    ## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)
    neogeo.core=fba
    
    ## N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)
    ## So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).
    ## If your screen is not compatible with one of these video modes, please check the recalbox's wiki.
    n64.videomode=DMT 4 HDMI
    ## If you are using a CRT screen, please change the setting above with this one :
    # n64.videomode=default
    
    ## Configurations generated by Recalbox
    mame.emulator=libretro
    fba_libretro.emulator=default
    mastersystem.emulator=default
    mastersystem.ratio=4/3
    megadrive.emulator=libretro
    megadrive.core=genesisplusgx
    

    Ich hab schon einiges ausprobiert und leider keine Lösung gefunden, hoffe Ihr könnt mir helfen.

    Danke schonmal ;).

    gruß BoergiM



  • @boergim Hi !
    As my german is too old to answer correctly in german, I'll answer in English !

    To avoid repeating the doc, I strongly encourage you to read https://github.com/recalbox/recalbox-os/wiki/Video-configuration-detailled-(EN)

    Now, you're stuck because of hdmi_safe=1 in your config.txt 😉



  • @Substring Hi,
    I have uncommanded the config hdmi_safe=1 but the resolution is still the same.



  • @boergim you should comment it 😉



  • @Substring
    I'm too stupid.

    Thats my config.txt in this moment and the resolution is 640x480:

    # uncomment if you get no picture on HDMI for a default "safe" mode
    #hdmi_safe=1
    
    disable_overscan=1
    
    # uncomment to force a specific HDMI mode (this will force VGA)
    hdmi_group=2
    hdmi_mode=51
    
    # comment to get jack audio
    #hdmi_drive=2
    
    config_hdmi_boost=4
    
    # force hdmi while the tv can take time before sending the signal on the hdmi output
    #hdmi_force_hotplug=1
    
    # uncomment for composite PAL
    #sdtv_mode=2
    
    # uncomment for lirc-rpi
    #dtoverlay=lirc-rpi
    
    # if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or give a low resolution because tv had no enough time to initialize it
    boot_delay=3
    
    # uncomment if you don't want the rainbow at startup
    disable_splash=1
    
    # Overclock
    gpu_mem_256=128
    gpu_mem_512=256
    gpu_mem_1024=512
    
    avoid_safe_mode=1
    
    kernel=zImage
    
    # NOOBS Auto-generated Settings:
    hdmi_force_hotplug=1
    hdmi_force_hotplug=1
    hdmi_ignore_edid=0xa5000080
    config_hdmi_boost=4
    hdmi_group=2
    hdmi_mode=4
    disable_overscan=0
    overscan_left=24
    overscan_right=24
    overscan_top=24
    overscan_bottom=24
    


  • @boergim I'm surprised as it doesn't really look like the default recalbox config.txt

    What if you comment hdmi_modeand hdmi_group ?



  • @Substring
    I have found the Problem.
    The Problem was the Auto-generated Settings: vom Noobs.



  • @boergim the noobs part is surprinsingly very big compared to usual, most of times i completely delete it. But now i don't even have noobs anymore on my recalbox SDs

    Glad you made it 🙂



Want to support us ?

247
Online

80.3k
Users

21.5k
Topics

157.2k
Posts