Recalbox Forum

    • Register
    • Login
    • Search
    • Recent
    • Tags
    • recalbox.com
    • Gitlab repository
    • Documentation
    • Discord

    Blast city et raspberry le retour!

    Emulateurs Arcade/PC/Console
    blast city retour
    3
    9
    2323
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • citroevo
      citroevo last edited by

      Bonjour a tous,

      j'utilise un raspberry pi 3 dans ma blast city q

      Mon raspberry est relié a ma borne avec un adaptateur VGA

      Pour les connaisseurs ( je n'en suis pas un) vous savez que cette borne fonction sur du 15/24/31 khz.

      Je suis en 31 khz,

      Malgrès que les potards soient au maximum, je ne parvient pas a remplir le cadre de ma tv

      Voici les information que me donne le putty:

      Group DMT has 10 modes:
      mode 4: 640x480 @ 60Hz 4:3, clock:25MHz progressive
      mode 16: 1024x768 @ 60Hz 4:3, clock:65MHz progressive
      mode 28: 1280x800 @ 60Hz 16:10, clock:83MHz progressive
      mode 32: 1280x960 @ 60Hz 4:3, clock:108MHz progressive
      mode 35: 1280x1024 @ 60Hz 5:4, clock:108MHz progressive
      mode 37: 1280x1024 @ 85Hz 5:4, clock:157MHz progressive
      mode 39: 1360x768 @ 60Hz 16:9, clock:85MHz progressive
      mode 47: 1440x900 @ 60Hz 16:10, clock:106MHz progressive
      mode 48: 1440x900 @ 75Hz 16:10, clock:136MHz progressive
      mode 85: 1280x720 @ 60Hz 16:9, clock:74MHz progressive

      Group CEA has 5 modes:
      (prefer) mode 1: 640x480 @ 60Hz 4:3, clock:25MHz progressive
      mode 2: 720x480 @ 60Hz 4:3, clock:27MHz progressive
      mode 3: 720x480 @ 60Hz 16:9, clock:27MHz progressive
      (native) mode 4: 1280x720 @ 60Hz 16:9, clock:74MHz progressive
      (native) mode 16: 1920x1080 @ 60Hz 16:9, clock:148MHz progressive

      1 Reply Last reply Reply Quote 0
      • citroevo
        citroevo last edited by

        les résultats du .conf

        # System Variable

        You can configure your recalbox from here

        To set a variable, remove the first ; on the line

        ------------ A - System Options -----------

        Uncomment the system.power.switch you use

        ;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
        ;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
        ;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
        ;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
        ;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
        ;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
        ;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)

        Recalbox Manager (http manager)

        system.manager.enabled=1

        Recalbox API (REST)

        system.api.enabled=0

        EmulationStation menu style

        default -> default all options menu

        none -> no menu except the game search menu

        bartop -> less menu, only needed for bartops

        system.es.menu=default

        Emulator special keys

        default -> default all special keys

        nomenu -> cannot popup the emulator menu

        none -> no special keys in emulators

        system.emulators.specialkeys=default

        Show or hide kodi in emulationstation (0,1)

        kodi.enabled=1

        Start kodi at launch (0,1)

        kodi.atstartup=0

        set x button shortcut (0,1)

        kodi.xbutton=0

        Kodi can wait for a network component before starting

        waithost is the ip or hostname that must answer to a ping to validate the availability

        waittime is the maximum time waited when kodi boots

        if waitmode is required, kodi will not start if the component is not available

        if waitmode is wish, kodi will start if the component is not available

        if waitmode is not set or has another value, kodi will start immediately

        ;kodi.network.waitmode=required
        ;kodi.network.waittime=10
        ;kodi.network.waithost=192.168.0.50

        ------------ B - Network ------------

        Set system hostname

        system.hostname=RECALBOX

        Activate wifi (0,1)

        wifi.enabled=1

        Wifi SSID (string)

        wifi.ssid=Livebox-5292

        Wifi KEY (string)

        Escape your special chars (# ; $) with a backslash : $ => $

        wifi.key=8732 E62E F126 E345 67A9 A38A 54

        Samba share

        system.samba.enabled=1

        Virtual Gamepads

        system.virtual-gamepads.enabled=1

        SSH

        system.ssh.enabled=1

        ------------ C - Audio ------------

        Set the audio device (auto, hdmi, jack)

        audio.device=jack

        Set system volume (0..100)

        audio.volume=100

        Enable or disable system sounds in ES (0,1)

        audio.bgmusic=1

        -------------- D - Controllers -----------------

        Enable support for standard bluetooth controllers

        controllers.bluetooth.enabled=1

        Please enable only one of these

        -------------- D1 - PS3 Controllers ------------

        ##Enable PS3 controllers support
        controllers.ps3.enabled=1

        Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)

        controllers.ps3.driver=official

        ------------ D2 - XBOX Controllers ------------

        Xbox controllers are already supported, but xboxdrv can solve some compatibility issues

        Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)

        controllers.xboxdrv.enabled=0

        Set the amount of controllers to use with xboxdrv (0..4)

        controllers.xboxdrv.nbcontrols=2

        ------------ D3 - GPIO Controllers ------------

        GPIO Controllers

        enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)

        controllers.gpio.enabled=0

        mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)

        controllers.gpio.args=map=1,2

        DB9 Controllers

        Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)

        controllers.db9.enabled=0

        db9 arguments

        controllers.db9.args=map=1

        Gamecon controllers

        Enable gamecon controllers, for nes, snes psx (0,1)

        controllers.gamecon.enabled=0

        gamecon_args

        controllers.gamecon.args=map=1

        XGaming's XArcade Tankstik and other compatible devices

        controllers.xarcade.enabled=1

        ------------ F - Language and keyboard ------------

        Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)

        system.language=fr_FR

        set the keyboard layout (fr,en,de,us,es)

        ;system.kblayout=us

        Set you local time

        Select your timezone from : ls /usr/share/zoneinfo/ (string)

        ;system.timezone=Europe/Paris

        ------------ G - UPDATES ------------

        Automatically check for updates at start (0,1)

        updates.enabled=1

        default : stable ; set to beta to get the next version currently being tested. set to unstable at your own risk to get the development version.

        updates.type=stable

        ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------

        The global value will be used for all emulators, except if the value

        is redefined in the emulator

        Set game resolution for emulators

        select your mode from the command : tvservice -m [MODE]

        CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced

        CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive

        use 'default' for using the default resolution

        (string)

        global.videomode=default## Shader set

        Automatically select shaders for all systems

        (none, retro, scanlines)

        global.shaderset=none

        Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)

        global.integerscale=1

        Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)

        global.shaders=

        Set ratio for all emulators (auto,4/3,16/9,16/10,custom)

        global.ratio=auto

        Set smooth for all emulators (0,1)

        global.smooth=0

        Set rewind for all emulators (0,1)

        global.rewind=0

        Set autosave/load savestate for all emulators (0,1)

        global.autosave=1

        Enable retroarchievements (0,1)

        Set your www.retroachievements.org username/password

        Escape your special chars (# ; $) with a backslash : $ => $

        global.retroachievements=1
        global.retroachievements.username=
        global.retroachievements.password=

        Set retroarch input driver (auto, udev, sdl2)

        If you don't have issues with your controllers, let auto

        global.inputdriver=auto

        If you do not want recalboxOS to generate the configuration for all emulators (string)

        ;global.configfile=/path/to/my/configfile.cfg

        ------------ I - EMULATORS CHOICES -----------

        You can override the global configuration here

        Here is the snes example

        ;snes.videomode=CEA 4 HDMI
        snes.core=snes9x_next
        ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
        ;snes.ratio=16/9
        ;snes.smooth=0
        ;snes.rewind=1
        ;snes.autosave=0
        ;snes.emulator=libretro
        ;snes.integerscale=0

        If you do not want recalboxOS to generate the configuration for the emulator :

        ;snes.configfile=/path/to/my/configfile.cfg

        Default cores for RPi3

        snes.core=snes9x_next
        gba.core=mgba
        mame.core=mame078
        nes.core=fceunext

        NeoGeo emulator

        You can use pifba or a libretro core (fba2x,libretro)

        neogeo.emulator=libretro

        If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)

        neogeo.core=fba

        N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)

        So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).

        If your screen is not compatible with one of these video modes, please check the recalbox's wiki.

        n64.videomode=DMT 4 HDMI

        If you are using a CRT screen, please change the setting above with this one :

        n64.videomode=default

        Configurations generated by Recalbox

        fba_libretro.autosave=0
        megadrive.autosave=1
        fba.emulator=default
        fba.ratio=auto

        1 Reply Last reply Reply Quote 0
        • citroevo
          citroevo last edited by

          0_1489221120341_neo.jpg

          voici ce que cela donne en image.

          savez vous ce qu'il faut modifier pour obtenir du plein écran?

          Merci d'avance

          1 Reply Last reply Reply Quote 0
          • Substring
            Substring last edited by

            1. Aurais-tu de l'overscan ?
            2. Je ne vois pas ta résolution d'affichage

            Former dev - Please reply with @substring so that i am notified when you answer me
            Ex dev - Merci de me répondre en utilisant @substring pour que je sois notifé

            1 Reply Last reply Reply Quote 0
            • citroevo
              citroevo last edited by

              Bonjour,
              oui j'ai de l'overscan.
              ou trouver la résolution?
              (Sur mon modèle de blast city, je peux la sélectionner manuellement.)

              1 Reply Last reply Reply Quote 0
              • citroevo
                citroevo last edited by

                2_1489224046369_unnamed2.jpg 1_1489224046369_unnamed1.jpg 0_1489224046368_unnamed.jpg

                j'en profite pour vous faire part de ce qu'il y a sur le config.txt

                1 Reply Last reply Reply Quote 0
                • citroevo
                  citroevo last edited by

                  j'ai tenté une nouvelle en 15 khz avec les "interrupteurs de la blast" car c'est ainsi que je préfère les jeux old school auxquels je joue.

                  Voici ce que j'obtiens dans le .conf :

                  # System Variable

                  You can configure your recalbox from here

                  To set a variable, remove the first ; on the line

                  ------------ A - System Options -----------

                  Uncomment the system.power.switch you use

                  ;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
                  ;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
                  ;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
                  ;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
                  ;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
                  ;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
                  ;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)

                  Recalbox Manager (http manager)

                  system.manager.enabled=1

                  Recalbox API (REST)

                  system.api.enabled=0

                  EmulationStation menu style

                  default -> default all options menu

                  none -> no menu except the game search menu

                  bartop -> less menu, only needed for bartops

                  system.es.menu=default

                  Emulator special keys

                  default -> default all special keys

                  nomenu -> cannot popup the emulator menu

                  none -> no special keys in emulators

                  system.emulators.specialkeys=default

                  Show or hide kodi in emulationstation (0,1)

                  kodi.enabled=1

                  Start kodi at launch (0,1)

                  kodi.atstartup=0

                  set x button shortcut (0,1)

                  kodi.xbutton=0

                  Kodi can wait for a network component before starting

                  waithost is the ip or hostname that must answer to a ping to validate the availability

                  waittime is the maximum time waited when kodi boots

                  if waitmode is required, kodi will not start if the component is not available

                  if waitmode is wish, kodi will start if the component is not available

                  if waitmode is not set or has another value, kodi will start immediately

                  ;kodi.network.waitmode=required
                  ;kodi.network.waittime=10
                  ;kodi.network.waithost=192.168.0.50

                  ------------ B - Network ------------

                  Set system hostname

                  system.hostname=RECALBOX

                  Activate wifi (0,1)

                  wifi.enabled=1

                  Wifi SSID (string)

                  wifi.ssid=Livebox-5292

                  Wifi KEY (string)

                  Escape your special chars (# ; $) with a backslash : $ => $

                  wifi.key=8732 E62E F126 E345 67A9 A38A 54

                  Samba share

                  system.samba.enabled=1

                  Virtual Gamepads

                  system.virtual-gamepads.enabled=1

                  SSH

                  system.ssh.enabled=1

                  ------------ C - Audio ------------

                  Set the audio device (auto, hdmi, jack)

                  audio.device=jack

                  Set system volume (0..100)

                  audio.volume=100

                  Enable or disable system sounds in ES (0,1)

                  audio.bgmusic=0

                  -------------- D - Controllers -----------------

                  Enable support for standard bluetooth controllers

                  controllers.bluetooth.enabled=1

                  Please enable only one of these

                  -------------- D1 - PS3 Controllers ------------

                  ##Enable PS3 controllers support
                  controllers.ps3.enabled=1

                  Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)

                  controllers.ps3.driver=official

                  ------------ D2 - XBOX Controllers ------------

                  Xbox controllers are already supported, but xboxdrv can solve some compatibility issues

                  Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)

                  controllers.xboxdrv.enabled=0

                  Set the amount of controllers to use with xboxdrv (0..4)

                  controllers.xboxdrv.nbcontrols=2

                  ------------ D3 - GPIO Controllers ------------

                  GPIO Controllers

                  enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)

                  controllers.gpio.enabled=0

                  mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)

                  controllers.gpio.args=map=1,2

                  DB9 Controllers

                  Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)

                  controllers.db9.enabled=0

                  db9 arguments

                  controllers.db9.args=map=1

                  Gamecon controllers

                  Enable gamecon controllers, for nes, snes psx (0,1)

                  controllers.gamecon.enabled=0

                  gamecon_args

                  controllers.gamecon.args=map=1

                  XGaming's XArcade Tankstik and other compatible devices

                  controllers.xarcade.enabled=1

                  ------------ F - Language and keyboard ------------

                  Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)

                  system.language=fr_FR

                  set the keyboard layout (fr,en,de,us,es)

                  ;system.kblayout=us

                  Set you local time

                  Select your timezone from : ls /usr/share/zoneinfo/ (string)

                  ;system.timezone=Europe/Paris

                  ------------ G - UPDATES ------------

                  Automatically check for updates at start (0,1)

                  updates.enabled=1

                  default : stable ; set to beta to get the next version currently being tested. set to unstable at your own risk to get the development version.

                  updates.type=stable

                  ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------

                  The global value will be used for all emulators, except if the value

                  is redefined in the emulator

                  Set game resolution for emulators

                  select your mode from the command : tvservice -m [MODE]

                  CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced

                  CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive

                  use 'default' for using the default resolution

                  (string)

                  global.videomode=default## Shader set

                  Automatically select shaders for all systems

                  (none, retro, scanlines)

                  global.shaderset=none

                  Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)

                  global.integerscale=0

                  Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)

                  global.shaders=

                  Set ratio for all emulators (auto,4/3,16/9,16/10,custom)

                  global.ratio=auto

                  Set smooth for all emulators (0,1)

                  global.smooth=0

                  Set rewind for all emulators (0,1)

                  global.rewind=0

                  Set autosave/load savestate for all emulators (0,1)

                  global.autosave=1

                  Enable retroarchievements (0,1)

                  Set your www.retroachievements.org username/password

                  Escape your special chars (# ; $) with a backslash : $ => $

                  global.retroachievements=0
                  global.retroachievements.username=
                  global.retroachievements.password=

                  Set retroarch input driver (auto, udev, sdl2)

                  If you don't have issues with your controllers, let auto

                  global.inputdriver=auto

                  If you do not want recalboxOS to generate the configuration for all emulators (string)

                  ;global.configfile=/path/to/my/configfile.cfg

                  ------------ I - EMULATORS CHOICES -----------

                  You can override the global configuration here

                  Here is the snes example

                  ;snes.videomode=CEA 4 HDMI
                  snes.core=snes9x_next
                  ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
                  ;snes.ratio=16/9
                  ;snes.smooth=0
                  ;snes.rewind=1
                  ;snes.autosave=0
                  ;snes.emulator=libretro
                  ;snes.integerscale=0

                  If you do not want recalboxOS to generate the configuration for the emulator :

                  ;snes.configfile=/path/to/my/configfile.cfg

                  Default cores for RPi3

                  snes.core=snes9x_next
                  gba.core=mgba
                  mame.core=mame078
                  nes.core=fceunext

                  NeoGeo emulator

                  You can use pifba or a libretro core (fba2x,libretro)

                  neogeo.emulator=libretro

                  If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)

                  neogeo.core=fba

                  N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)

                  So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).

                  If your screen is not compatible with one of these video modes, please check the recalbox's wiki.

                  n64.videomode=DMT 4 HDMI

                  If you are using a CRT screen, please change the setting above with this one :

                  n64.videomode=default

                  Configurations generated by Recalbox

                  fba_libretro.autosave=0
                  megadrive.autosave=1
                  fba.emulator=default
                  fba.ratio=auto

                  ensuite avec le putty :

                  Group CEA has 6 modes:
                  mode 1: 640x480 @ 60Hz 4:3, clock:25MHz progressive
                  mode 2: 720x480 @ 60Hz 4:3, clock:27MHz progressive
                  mode 3: 720x480 @ 60Hz 16:9, clock:27MHz progressive
                  (native) mode 4: 1280x720 @ 60Hz 16:9, clock:74MHz progressive
                  (prefer) mode 8: 720x240 @ 60Hz 4:3, clock:27MHz x2 progressive
                  (native) mode 16: 1920x1080 @ 60Hz 16:9, clock:148MHz progressive

                  Group DMT has 10 modes:
                  mode 4: 640x480 @ 60Hz 4:3, clock:25MHz progressive
                  mode 16: 1024x768 @ 60Hz 4:3, clock:65MHz progressive
                  mode 28: 1280x800 @ 60Hz 16:10, clock:83MHz progressive
                  mode 32: 1280x960 @ 60Hz 4:3, clock:108MHz progressive
                  mode 35: 1280x1024 @ 60Hz 5:4, clock:108MHz progressive
                  mode 37: 1280x1024 @ 85Hz 5:4, clock:157MHz progressive
                  mode 39: 1360x768 @ 60Hz 16:9, clock:85MHz progressive
                  mode 47: 1440x900 @ 60Hz 16:10, clock:106MHz progressive
                  mode 48: 1440x900 @ 75Hz 16:10, clock:136MHz progressive
                  mode 85: 1280x720 @ 60Hz 16:9, clock:74MHz progressive

                  et pour finir, le config txt:

                  0_1489228846434_config txt.jpg

                  1 Reply Last reply Reply Quote 0
                  • ian57
                    ian57 Staff last edited by

                    @citroevo Héhéh on va pouvoir venir se connecter chez toi en WIFI 🙂

                    blague à part, entoure ton fichier recalbox.conf par 3 accents graves comme suit

                    ```
                    test
                    ```

                    pour avoir la coloration syntaxique... ça aide à lire

                    test
                    

                    "UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity." Dennis Ritchie

                    citroevo 1 Reply Last reply Reply Quote 0
                    • citroevo
                      citroevo @ian57 last edited by

                      
                      # System Variable
                      You can configure your recalbox from here
                      To set a variable, remove the first ; on the line
                      ------------ A - System Options -----------
                      Uncomment the system.power.switch you use
                      
                      ;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
                      ;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
                      ;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
                      ;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
                      ;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
                      ;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
                      ;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
                      Recalbox Manager (http manager)
                      
                      system.manager.enabled=1
                      Recalbox API (REST)
                      
                      system.api.enabled=0
                      EmulationStation menu style
                      default -> default all options menu
                      none -> no menu except the game search menu
                      bartop -> less menu, only needed for bartops
                      
                      system.es.menu=default
                      Emulator special keys
                      default -> default all special keys
                      nomenu -> cannot popup the emulator menu
                      none -> no special keys in emulators
                      
                      system.emulators.specialkeys=default
                      Show or hide kodi in emulationstation (0,1)
                      
                      kodi.enabled=1
                      Start kodi at launch (0,1)
                      
                      kodi.atstartup=0
                      set x button shortcut (0,1)
                      
                      kodi.xbutton=0
                      Kodi can wait for a network component before starting
                      waithost is the ip or hostname that must answer to a ping to validate the availability
                      waittime is the maximum time waited when kodi boots
                      if waitmode is required, kodi will not start if the component is not available
                      if waitmode is wish, kodi will start if the component is not available
                      if waitmode is not set or has another value, kodi will start immediately
                      
                      ;kodi.network.waitmode=required
                      ;kodi.network.waittime=10
                      ;kodi.network.waithost=192.168.0.50
                      ------------ B - Network ------------
                      Set system hostname
                      
                      system.hostname=RECALBOX
                      Activate wifi (0,1)
                      
                      wifi.enabled=1
                      Wifi SSID (string)
                      
                      wifi.ssid=Livebox-5292
                      Wifi KEY (string)
                      Escape your special chars (# ; $) with a backslash : $ => $
                      
                      wifi.key=8732 E62E F126 E345 67A9 A38A 54
                      Samba share
                      
                      system.samba.enabled=1
                      Virtual Gamepads
                      
                      system.virtual-gamepads.enabled=1
                      SSH
                      
                      system.ssh.enabled=1
                      ------------ C - Audio ------------
                      Set the audio device (auto, hdmi, jack)
                      
                      audio.device=jack
                      Set system volume (0..100)
                      
                      audio.volume=100
                      Enable or disable system sounds in ES (0,1)
                      
                      audio.bgmusic=0
                      -------------- D - Controllers -----------------
                      Enable support for standard bluetooth controllers
                      
                      controllers.bluetooth.enabled=1
                      Please enable only one of these
                      -------------- D1 - PS3 Controllers ------------
                      
                      ##Enable PS3 controllers support
                      controllers.ps3.enabled=1
                      Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
                      
                      controllers.ps3.driver=official
                      ------------ D2 - XBOX Controllers ------------
                      Xbox controllers are already supported, but xboxdrv can solve some compatibility issues
                      Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)
                      
                      controllers.xboxdrv.enabled=0
                      Set the amount of controllers to use with xboxdrv (0..4)
                      
                      controllers.xboxdrv.nbcontrols=2
                      ------------ D3 - GPIO Controllers ------------
                      GPIO Controllers
                      enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
                      
                      controllers.gpio.enabled=0
                      mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
                      
                      controllers.gpio.args=map=1,2
                      DB9 Controllers
                      Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
                      
                      controllers.db9.enabled=0
                      db9 arguments
                      
                      controllers.db9.args=map=1
                      Gamecon controllers
                      Enable gamecon controllers, for nes, snes psx (0,1)
                      
                      controllers.gamecon.enabled=0
                      gamecon_args
                      
                      controllers.gamecon.args=map=1
                      XGaming's XArcade Tankstik and other compatible devices
                      
                      controllers.xarcade.enabled=1
                      ------------ F - Language and keyboard ------------
                      Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
                      
                      system.language=fr_FR
                      set the keyboard layout (fr,en,de,us,es)
                      
                      ;system.kblayout=us
                      Set you local time
                      Select your timezone from : ls /usr/share/zoneinfo/ (string)
                      
                      ;system.timezone=Europe/Paris
                      ------------ G - UPDATES ------------
                      Automatically check for updates at start (0,1)
                      
                      updates.enabled=1
                      default : stable ; set to beta to get the next version currently being tested. set to unstable at your own risk to get the development version.
                      
                      updates.type=stable
                      ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------
                      The global value will be used for all emulators, except if the value
                      is redefined in the emulator
                      Set game resolution for emulators
                      select your mode from the command : tvservice -m [MODE]
                      CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced
                      CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive
                      use 'default' for using the default resolution
                      (string)
                      
                      global.videomode=default## Shader set
                      Automatically select shaders for all systems
                      (none, retro, scanlines)
                      
                      global.shaderset=none
                      Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
                      
                      global.integerscale=0
                      Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
                      
                      global.shaders=
                      Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
                      
                      global.ratio=auto
                      Set smooth for all emulators (0,1)
                      
                      global.smooth=0
                      Set rewind for all emulators (0,1)
                      
                      global.rewind=0
                      Set autosave/load savestate for all emulators (0,1)
                      
                      global.autosave=1
                      Enable retroarchievements (0,1)
                      Set your www.retroachievements.org username/password
                      Escape your special chars (# ; $) with a backslash : $ => $
                      
                      global.retroachievements=0
                      global.retroachievements.username=
                      global.retroachievements.password=
                      Set retroarch input driver (auto, udev, sdl2)
                      If you don't have issues with your controllers, let auto
                      
                      global.inputdriver=auto
                      If you do not want recalboxOS to generate the configuration for all emulators (string)
                      
                      ;global.configfile=/path/to/my/configfile.cfg
                      ------------ I - EMULATORS CHOICES -----------
                      You can override the global configuration here
                      Here is the snes example
                      
                      ;snes.videomode=CEA 4 HDMI
                      snes.core=snes9x_next
                      ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
                      ;snes.ratio=16/9
                      ;snes.smooth=0
                      ;snes.rewind=1
                      ;snes.autosave=0
                      ;snes.emulator=libretro
                      ;snes.integerscale=0
                      If you do not want recalboxOS to generate the configuration for the emulator :
                      
                      ;snes.configfile=/path/to/my/configfile.cfg
                      Default cores for RPi3
                      
                      snes.core=snes9x_next
                      gba.core=mgba
                      mame.core=mame078
                      nes.core=fceunext
                      NeoGeo emulator
                      You can use pifba or a libretro core (fba2x,libretro)
                      
                      neogeo.emulator=libretro
                      If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)
                      
                      neogeo.core=fba
                      N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)
                      So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).
                      If your screen is not compatible with one of these video modes, please check the recalbox's wiki.
                      
                      n64.videomode=DMT 4 HDMI
                      If you are using a CRT screen, please change the setting above with this one :
                      n64.videomode=default
                      Configurations generated by Recalbox
                      
                      fba_libretro.autosave=0
                      megadrive.autosave=1
                      fba.emulator=default
                      fba.ratio=auto
                      
                      
                      1 Reply Last reply Reply Quote 0
                      • First post
                        Last post

                      Want to support us ?

                      67
                      Online

                      98.7k
                      Users

                      28.1k
                      Topics

                      187.0k
                      Posts

                      Copyright © 2021 recalbox.com