Recalbox 4.0.0 beta 2 manual overclock on RPi 3 ?

[slowmo310]

Is there a way to do this without relying on the front-end ?

[rockaddicted]

Not for the moment, we need to practice stability tests before adding an overclock setting.

[slowmo310]

So I wouldn't be able to go into raspi-config from a prompt and do it myself ?

[slowmo310]

Any update on an OC option ? I opened this as a issue on github, and it was deleted by a mod. I wonder if this will eventually be addressed.

[acris]

Not for the moment, we need to practice stability tests before adding an overclock setting.

Issue closed not deleted. https://github.com/recalbox/recalbox-os/issues/806

[slowmo310]

Hello Acres, would you know by chance if it can be manually done without the front-end ?

[nickdj]

You can overclock via the configuration (hold shift when booting) and there are many examples out there where the cpu_free can be increased a little and the sdram freq upped to 500.  These settings work well. If I remember correctly there is a config file somewhere where you can predefine an overclock setting ( currently set as 'none')  I'll have a play and tell you what works well setting wise and where the configuration file is.

[slowmo310]

OMG, Thank You !

[ulrich453]

nickdj, Any update on setting wise on what works best? Thanks,

[voljega]

https://github.com/recalbox/recalbox-os/issues/896 resumed and translated from french : after tests on 20 different Pi3, configurations are : arm_freq=1400 (Extrem) / 1350 (High) / 1300 (Normal) over_voltage=4 sdram_freq=575 sdram_schmoo=0x02000020 over_voltage_sdram_p=6 over_voltage_sdram_i=4 over_voltage_sdram_c=4 core_freq=500 v3d_freq=500 h264_freq=333 gpu_mem=256