Boot bloqué à l'écran noir avec les 4 fantômes...
-
Re: Boot bloqué à l'écran noir avec les 4 fantômes...
Bonjour, J'ai le même problème et le CHKDSK n'a rien changé. C'est apparu après avoir changer un paramètre du thème, ce qui à fait redémarré le système et depuis plus rien.
je suis preneur de tous vos conseils -
Bonjour @Jeff555
poste ton fichier recalbox.conf si tu as accès.
Il y a surement une ligne à supprimer -
Bonjour @acris
merci pour ta réponse, voici mon fichier recalbox. conf# System Variable # You can configure your recalbox from here # To set a variable, remove the first ; on the line # ------------ A - System Options ----------- # # Uncomment the system.power.switch you use ;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation ;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup ;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013 ;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015 ;system.power.switch=WITTYPI # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi ;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN) ;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN) ;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN) ;system.power.switch=PIN356PUSHRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN) ## fbcp FrameBuffer Copy Program ## For small TFT screen on GPIO and SPI ## See https://github.com/recalbox/recalbox-os/wiki/Utility---Use-of-fbcp-for-small-TFT-screen-%28EN%29 for details ## Needed for Waveshare 3.2" 3.5" TFT screen, 2.8" Adafruit screen ## See https://github.com/recalbox/recalbox-os/wiki/TFT-Screen-SPI-Bus-%28EN%29 ## for support and configuration details needed by /boot/config.txt system.fbcp.enabled=0 ## Splash screen duration ## 0 : Video will be stopped when emulationstation is ready to start. ## -1 : All the video will be played before emulationstation start (default) ## >0 : Time the video will be played before emulationstation start (in seconds) system.splash.length=-1 ## Splash videos selection ## all: select a boot video in recalbox videos and user videos ## recalbox: select a boot video only in recalbox videos ## custom: select a boot video only in user videos ## Any invalid value means "all" system.splash.select=all ## Recalbox Manager (http manager) system.manager.enabled=1 ## Currently, only version 2 is available system.manager.version=2 ## Recalbox security # enforce security # samba password required # disable virtual gamepads system.security.enabled=0 ## Recalbox API (REST) system.api.enabled=0 ## Allow a specific resolution for ES only from the command : tvservice -m [MODE] ## Leave commented for the default usual behaviour ;system.es.videomode=CEA 4 HDMI ## EmulationStation ### menu style ### default -> default all options menu ### none -> no menu except the game search menu ### bartop -> less menu, only needed for bartops emulationstation.menu=default ### Select a system to show on boot (use rom directory name) (string) emulationstation.selectedsystem=favorites ### Show the gamelist of the first or selected system on boot (0,1) emulationstation.bootongamelist=0 ### Disable system view. ES will boot and show ONLY the first or selected system (0,1) emulationstation.hidesystemview=0 ### Pa**e Gamelists only. Show only games listed in gamelist.xml files (0,1) emulationstation.gamelistonly=0 ### Force basicgameList view to be displayed, even if your game systems are scraped (0,1) emulationstation.forcebasicgamelistview=0 ### Filter out adult games ### you may use emulationstation.snes.filteradultgames=1 ### to filter out adult games for the snes system or any other system ;emulationstation.filteradultgames=1 ### Zipped gamelist preference ### Whatever you choose, emulationstation can read both compressed ### and uncompressed gamelist.xml or gamelist.zip ### However updated gamelist will be saved in your prefered format. ### Zipped format may save load time, especially on slow devices. ### 0 = gamelist.xml ### 1 = gamelist.zip ;emulationstation.zippedgamelist=1 ## Arcade metasystem ## Activate the Arcade metasystem to group all games from piFBA, FBN (libretro), MAME and optionally Neogeo ## into a single "Arcade" system. ;emulationstation.arcade=1 ## You may want to specify its position in the system list. (Default: 0) ## Negatives values may be used to tart from the end (-1 = last position) ;emulationstation.arcade.position=0 ## Include NeoGeo or not (default: 1) ;emulationstation.arcade.includeneogeo=1 ## Hide included system or leave them in the system list (default: 1) ;emulationstation.arcade.hideoriginals=1 ## Virtual systems ### Activate a virtual system with all games available from all systems ;emulationstation.collection.allgames=1 ### Activate a virtual system with all multiplayer games (players >= 2) ;emulationstation.collection.multiplayers=1 ### Activate a virtual system with last played games ;emulationstation.collection.lastplayed=1 ## Videosnaps ### Delay before videosnaps start, in millisecond. Default: 2s ;emulationstation.videosnaps.delay=2000 ### Video loop times. 0 = no video. 1 or more = the video loops x times before fading out ;emulationstation.videosnaps.loop=1 ### Enable videosnap sound/music ;emulationstation.videosnaps.sound=1 ## Scrapers ### Activate this option to extract region from filename when possible ;scraper.extractregionfromfilename=1 ### Select the source of game's names ### 0 = from scrapper result (default) ### 1 = from filename ### 2 = from filename undecorated (i.e: (text) and [text] removed) ;scraper.getnamefrom=0 ### ScreenScraper.fr ### Force media region - if not defined, region is taken from system.language. Default: us ;scraper.screenscraper.region=eu ### Force text language - if not defined, region is taken from system.language. Default: en ;scraper.screenscraper.language=fr ### Choose the media to download among: ### screenshot: game screenshot ### title : game title screenshot ### box2d : Front case ### box3d : 3D rendered case ### mixv1 : Recalbox special mix image V1 (default) ### mixv2 : Recalbox special mix image V2 ;scraper.screenscraper.media=mixv1 ### ScreenScraper account ;scraper.screenscraper.user= ;scraper.screenscraper.password= ## Emulator special keys ## default -> default all special keys ## nomenu -> cannot popup the emulator menu ## none -> no special keys in emulators system.emulators.specialkeys=default ## Show or hide kodi in emulationstation (0,1) kodi.enabled=1 ## Start kodi at launch (0,1) kodi.atstartup=0 ## set x button shortcut (0,1) kodi.xbutton=1 ## Allow a specific resolution for Kodi only from the command : tvservice -m [MODE] ## By default is using the default resolution of your screen kodi.videomode=default ## Kodi can wait for a network component before starting ## waithost is the ip or hostname that must answer to a ping to validate the availability ## waittime is the maximum time waited when kodi boots ## if waitmode is required, kodi will not start if the component is not available ## if waitmode is wish, kodi will start if the component is not available ## if waitmode is not set or has another value, kodi will start immediately ;kodi.network.waitmode=required ;kodi.network.waittime=10 ;kodi.network.waithost=192.168.0.50 ## Hyperion ## Hyperion allows you to use an ambilight like led system on your recalbox ## Use hypercon to create your configuration file, and copy it in /recalbox/share/system/configs/hyperion/hyperion.config.json hyperion.enabled=0 # ------------ B - Network ------------ # ## Set system hostname system.hostname=RECALBOX ## Activate wifi (0,1) wifi.enabled=1 ## Set wifi region ## More info here: https://github.com/recalbox/recalbox-os/wiki/Wifi-country-code-(EN) wifi.region=JP ## Wifi SSID (string) wifi.ssid=SFR_627F ## Wifi KEY (string) ## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx" ## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot ## Escape your special chars (# ; $) with a backslash : $ => \$ wifi.key=a9w1rk5v1q8xtyxd1laz ## Wifi - static IP ## if you want a static IP address, you must set all 3 values (ip, gateway, and netmask) ## if any value is missing or all lines are commented out, it will fall back to the ## default of DHCP ;wifi.ip=manual ip address ;wifi.gateway=new gateway ;wifi.netmask=new netmask # secondary wifi (not configurable via the user interface) ;wifi2.ssid=new ssid ;wifi2.key=new key # third wifi (not configurable via the user interface) ;wifi3.ssid=new ssid ;wifi3.key=new key ## Samba share system.samba.enabled=1 ### Virtual Gamepads system.virtual-gamepads.enabled=1 ### SSH system.ssh.enabled=1 # ------------ C - Audio ------------ # ## Set the audio device (auto, hdmi, jack) audio.device=Default output ## Set system volume (0..100) audio.volume=90 ## Enable or disable system sounds in ES (0,1) audio.bgmusic=0 # -------------- D - Controllers ----------------- # # Enable support for standard bluetooth controllers controllers.bluetooth.enabled=1 # Enable ERTM controllers.bluetooth.ertm=1 ## Please enable only one of these # -------------- D1 - PS3 Controllers ------------ # ##Enable PS3 controllers support controllers.ps3.enabled=1 ## Choose a driver between bluez, official and shanwan ## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis ## official -> sixad drivers, support official and gasia sisaxis ## shanwan -> shanwan drivers, support official and shanwan sisaxis controllers.ps3.driver=shanwan # ------------ D2 - GPIO Controllers ------------ # ## GPIO Controllers ## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1) controllers.gpio.enabled=0 ## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2) controllers.gpio.args=map=1,2 ## Custom mk_gpio arguments, ## controllers.gpio.args=map=5 gpio=Y-,Y+,X-,X+,start,select,a,b,tr,y,x,tl,hk for one controller, ## controllers.gpio.args=map=5 gpio=pin1,pin2,pin3,.....,pin12,pin13 ## controllers.gpio.args=map=5,6 gpio=Y-,Y+,X-,X+,start,select,a,b,tr,y,x,tl,hk gpio2=Y-,Y+,X-,X+,start,select,a,b,tr,y,x,tl,hk for 2 (map=5,map=5,6) ## controllers.gpio.args=map=5,6 gpio=gpiox,gpioy,gpioz,.....,gpiou,gpiov gpio2=gpiox,gpioy,gpioz,.....,gpiou,gpiov # where gpiox,gpioy,gpioz ... are NOT pin numbers on the connector, BUT location gpio numbered as in # https://www.raspberrypi-spy.co.uk/wp-content/uploads/2012/06/Raspberry-Pi-GPIO-Layout-Model-B-Plus-rotated-2700x900.png ## Set pin to -1 to disable it # controllers.gpio.args=map=5,6 gpio=4,17,27,22,10,9,25,24,23,18,15,14,2 gpio2=11,5,6,13,19,26,21,20,16,12,7,8,3 ## MCP configuration : GPIO and MCP can be used together. You can mix them. ## map=0x20,0x21 for 2 mcp23017 on i2c bus #controllers.gpio.args=map=0x20,0x21,5,6 gpio=4,17,27,22,10,9,25,24,23,18,15,14,-1 gpio2=11,5,6,13,19,26,21,20,16,12,7,8,-1 # ------------ D3 - Steam Controllers ------------ # ## Enable steam controller service controllers.steam.enabled=0 ## DB9 Controllers ## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1) controllers.db9.enabled=0 ## db9 arguments controllers.db9.args=map=1 ## Gamecon controllers ## Enable gamecon controllers, for nes, snes, psx (0,1) controllers.gamecon.enabled=0 ## gamecon_args controllers.gamecon.args=map=1 ## XGaming's XArcade Tankstik and other compatible devices controllers.xarcade.enabled=1 # ------------ E - Language and keyboard ------------ # ## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN) system.language=fr_FR ## set the keyboard layout (fr,en,de,us,es) system.kblayout=fr ## Set you local time ## Select your timezone from : ls /usr/share/zoneinfo/ (string) ;system.timezone=Europe/Paris # ------------ F - UPDATES ------------ # ## Automatically check for updates at start (0,1) updates.enabled=1 # Update type : default to stable updates.type=stable # ------------ G - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ # ## The global value will be used for all emulators, except if the value ## is redefined in the emulator ## Set game resolution for emulators ## select your mode from the command : tvservice -m [MODE] ## CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced ## CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive ## use 'default' for using the default resolution ## use 'auto' : switches to CEA 4 HDMI if supported, else keep the current resolution ## (string) global.videomode=CEA 4 HDMI ## Shader set ## Automatically select shaders for all systems ## (none, retro, scanlines) global.shaderset=none ## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1) global.integerscale=0 ## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string) global.shaders= ## Set ratio for all emulators (auto,4/3,16/9,16/10,custom) global.ratio=auto ## Set smooth for all emulators (0,1) global.smooth=1 ## Set rewind for all emulators (0,1) global.rewind=1 ## Set autosave/load savestate for all emulators (0,1) global.autosave=0 ## Enable retroarchievements (0,1) ## Set your www.retroachievements.org username/password ## Escape your special chars (# ; $) with a backslash : $ => \$ global.retroachievements=0 global.retroachievements.hardcore=0 global.retroachievements.username= global.retroachievements.password= ## Set retroarch input driver (auto, udev, sdl2) ## If you don't have issues with your controllers, let auto global.inputdriver=auto ## If you do not want recalboxOS to generate the configuration for all emulators (string) ;global.configfile=/path/to/my/configfile.cfg ## Demo screensaver parameters ## Set the system list from which ES will run random games. ## Empty list or unexisting key means all available systems global.demo.systemlist=3do,amigacd32,atari2600,atari5200,atari7800,daphne,fbneo,fds,gamegear,gba,lynx,mame,mastersystem,megadrive,neogeo,nes,ngpc,pcengine,sega32x,sg1000,snes ## Default demo game sessions last 90s. Change this value if you want shorter or longer sessions ;global.demo.duration=90 ## Default game info screen duration lasts 6s. Change this value if you want shorter or longer info screens. ;global.demo.infoscreenduration=6 ## Retroarch AI Translation service ## Comment out or set to 0 the following key if you don't want the AI service global.translate=1 ## Set the source and the target languages. ## Allowed language list: EN, ES, FR, IT, DE, JP, NL, CS, DA, SV, HR, KO, ZH_CN, ZH_TW, CA, BG, BN, EU, AZ, AR, SQ, ## AF, EO, ET, TL, FI, GL, KA, EL, GU, HT, IW, HI, HU, IS, ID, GA, KN, LA, LV, LT, MK, MS, ## MT, NO, FA, PL, PT, RO, RU, SR, SK, SL, SW, TA, TE, TH, TR, UK, UR, VI, CY, YI ## Setting the translate.from key to a specified language may speed up or give more accurate results ## If translate.to key is commented, the default value is extracted from system.language or, if system.language is ## undefined, set to auto (=EN). global.translate.from=auto global.translate.to=auto ## zTranslate API Key ## go to https://ztranslate.net and create an account. ## validate your account, then log in and go to the settngs page ## Look for the API Key at the bottom of the page, then uncomment the following key and paste your API Key: ;global.translate.apikey=RECALBOX ## Other translation service ## If you want to use another translation service or a custom API call, use this key to ## specify the url to call. If the key is not empty, it is used instead of zTranslation's API Key ;global.translate.url= # ------------ H - EMULATORS CHOICES ----------- # ## You can override the global configurations here ## Here is the snes example ;snes.videomode=CEA 4 HDMI snes.core=snes9x2010 ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp ;snes.ratio=16/9 ;snes.smooth=0 ;snes.rewind=1 ;snes.autosave=0 ;snes.emulator=libretro ;snes.integerscale=0 ## If you do not want recalboxOS to generate the configuration for the emulator: ;snes.configfile=/path/to/my/configfile.cfg ## Default cores for RPi3 snes.core=snes9x2010 c64.core=x64 ## NeoGeo emulator ## You can use pifba or a libretro core (fba2x,libretro) neogeo.emulator=libretro ## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fbneo, mame2000) neogeo.core=fbneo ## N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution) ## So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI). ## If your screen is not compatible with one of these video modes, please check the recalbox's wiki. n64.videomode=DMT 4 HDMI ## If you are using a CRT screen, please change the setting above with this one : # n64.videomode=default ## Dreamcast emulator ## Like N64, such a CPU intensive emulator needs a small resolution ## Consider DMT 4 HDMI (640*480) or DMT 9 HDMI (800*600). If you have a black screen on dreamcast, try DMT 9 HDMI here dreamcast.videomode=DMT 4 HDMI ## Demo screensaver parameters ## Include or exclude a particular system from the demo screensaver ## You may change the global.demo.systemlist key or include/exclude every single system ;snes.demo.include=0 ## Set the session duration for a particular system ;snes.demo.duration=90 ## Disable Atomisware atomiswave.ignore=1 # ------------ I - NETPLAY PARAMETERS ----------- # ## All these values are handled by Recalbox itself global.netplay=1 global.netplay.nickname= global.netplay.port=55435 global.netplay.relay= global.netplay.systems=fbneo,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,sg1000,snes,supergrafx,atari2600,pcenginecd,pcfx,fds,tic80,segacd,mrboom global.netplay.lobby=http://lobby.libretro.com/list/ # ------------ J - TFT SECONDARY SCREEN ----------- # #Second miniTFT screen as marquee to display scrapes and videos #Enable it with system.secondMiniTFT.enabled=1, disable with system.secondMiniTFT.enabled=0 #this configuration is REQUIRED system.secondminitft.enabled=0 #Type of mini TFT : OGST, unknown #for Support of XU4 OGSTCase mini screen, just configure it secondminitft.type=ogst #Most of spi tft screen are enabled thanks to overlays in /boot/config.txt #please check the specific configuration of your screen #Some examples are available on the page ..... # values are : # - overlay : screen configured through overlays in /boot/config.txt # - ogst : screen of the XU4 OGST case. Supported out of the box # - default : the rest of the world #this configuration is REQUIRED if system.secondminitft.enabled=1 ;system.secondminitft.type=overlay #Choose the resolution of your screen #miniTFT resolution 320x240 -> 240p, 480x320 -> 320p #this configuration is REQUIRED if system.secondminitft.enabled=1 ;system.secondminitft.resolution=240p #Scraped image aspect on tft screen : fbv display option # options available : stretch, ignore-aspect, enlarge. # stretch : Strech (using a simple resizing routine) the image to fit onto screen if necessary # alpha : use the alpha channel (if applicable) # ignore-aspect : Ignore the image aspect while resizing # enlarge : Enlarge the image to fit the whole screen if necessary # 1 = enabled, 0 = disabled #this configuration is REQUIRED if system.secondminitft.enabled=1 ;system.secondminitft.imagestretchenabled=1 ;system.secondminitft.imageenlargeenabled=0 ;system.secondminitft.imagealphaenabled=0 ;system.secondminitft.imageignoreaspectenabled=1 #When activating the second TFT screen, you may want to display #game scraped video only on the second screen. This variable #allows you to disable scraped video playing in ES during game browsing #system.secondminitft.disablevideoines=1 disable video playing in ES #system.secondminitft.disablevideoines=0 enable video playing in ES #this configuration is OPTIONAL if system.secondminitft.enabled=1 ;system.secondminitft.disablevideoines=1 #if the backlight of your your screen can be manage by PWM, #indicates the GPIO value of your PWM control #WiringPi and its gpio program will be used to control the backlight #when RB goes in SLEEP mode, and when it wakes up. #On raspberry pi, PWMs cannot be used simultaneously with Jack sound output. #If your are using HDMI or a Audio hat you can use backlight PWM control for the second screen #If you are using Jack output please leave commented. #The Screen will be switch down in Sleep mode, and switch on when it wakes up. #On OGST, only this mode is available. #this configuration is OPTIONAL if system.secondminitft.enabled=1 ;system.secondminitft.backlightcontrol=18 ## Configurations generated by Recalbox global.quitpresstwice=0 -
Bonjour, @Jeff555 exactement le même problème de mon côté ce week-end, plantage après quelques essais de chargements de thèmes (celui par défaut).
Pas pensé à tester chkdisk, entre-temps j'ai refait une fresh install.
Je suis le post avec intérêt. A+ -
-
Merci @acris, c'est typiquement le genre de problème à la con, pas sûr qu'il se reproduise systématiquement (syndrome du bruit de la voiture qui comme par hasard ne se produit plus en présence du garagiste
)
Je me rappelle que les plantages de ce genre étaient courant sur une précédente version de Recalbox (avant la Dragonblaze) lorsque on modifiait les thèmes trop souvent! Courage pour les investigations, je suis vigilant de mon côté si d'aventure je teste les effets du thème. A+
