Screenscaper issue

For information, Screenscraper website is currently down. All the Screenscraper staff is aware of this issue. Until it's solved, you won't be able to scrap from Recalbox or Skraper. We apologize for the inconvenience.

Pour information, le site internet de Screenscraper est actuellement en panne. Toute l'équipe de Screenscraper est consciente de ce problème. Tant qu'il ne sera pas résolu, vous ne pourrez pas scraper depuis Recalbox ou Skraper. Veuillez nous excuser pour le dérangement.

The Recalbox Team.

Settings on monitor Sony PVM 14M2U CRT!!!!



  • Hello,
    I can't find the right setting with my Sony PVM 14M2U monitor.
    I have tried various configurations, but the screen is never aligned correctly.

    Currently used:

    Raspberry Pi 3b
    Recalbox 18.07.13
    Gert-VGA VGA666 Adapter Board
    VGA Male to BNC Male Adapter (5 BNC. 3 RGB + 2 sync H / V)
    This is the configuration in the "config.txt" file:

    disable_splash=1
    disable_overscan=1
    gpu_mem_256=128
    gpu_mem_512=256
    gpu_mem_1024=512
    avoid_safe_mode=1
    kernel=zImage
    overscan_scale=0
    disable_audio_dither=1
    dtparam=audio=on
    dtoverlay=vga666
    enable_dpi_lcd=1
    display_default_lcd=1
    dpi_group=2
    dpi_mode=87
    hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1
    hdmi_group=2
    hdmi_mode=87
    I believe that the problem is of the "hdmi_timings" line, in fact even with other values taken from the web, I always get unsatisfactory results. But isn't there any way to put the correct values based on my monitor?



  • @amirking said in Settings on monitor Sony PVM 14M2U CRT!!!!:

    Hello,
    I can't find the right setting with my Sony PVM 14M2U monitor.
    I have tried various configurations, but the screen is never aligned correctly.

    Currently used:

    Raspberry Pi 3b
    Recalbox 18.07.13
    Gert-VGA VGA666 Adapter Board
    VGA Male to BNC Male Adapter (5 BNC. 3 RGB + 2 sync H / V)
    This is the configuration in the "config.txt" file:

    disable_splash=1
    disable_overscan=1
    gpu_mem_256=128
    gpu_mem_512=256
    gpu_mem_1024=512
    avoid_safe_mode=1
    kernel=zImage
    overscan_scale=0
    disable_audio_dither=1
    dtparam=audio=on
    dtoverlay=vga666
    enable_dpi_lcd=1
    display_default_lcd=1
    dpi_group=2
    dpi_mode=87
    hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1
    hdmi_group=2
    hdmi_mode=87
    I believe that the problem is of the "hdmi_timings" line, in fact even with other values taken from the web, I always get unsatisfactory results. But isn't there any way to put the correct values based on my monitor?

    @amirking said in Settings on monitor Sony PVM 14M2U CRT!!!!:

    Hello,
    I can't find the right setting with my Sony PVM 14M2U monitor.
    I have tried various configurations, but the screen is never aligned correctly.

    Currently used:

    Raspberry Pi 3b
    Recalbox 18.07.13
    Gert-VGA VGA666 Adapter Board
    VGA Male to BNC Male Adapter (5 BNC. 3 RGB + 2 sync H / V)
    This is the configuration in the "config.txt" file:

    disable_splash=1
    disable_overscan=1
    gpu_mem_256=128
    gpu_mem_512=256
    gpu_mem_1024=512
    avoid_safe_mode=1
    kernel=zImage
    overscan_scale=0
    disable_audio_dither=1
    dtparam=audio=on
    dtoverlay=vga666
    enable_dpi_lcd=1
    display_default_lcd=1
    dpi_group=2
    dpi_mode=87
    hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 https://check-distance.com/route/atlanta-ga/macon-ga
    hdmi_group=2
    hdmi_mode=87
    I believe that the problem is of the "hdmi_timings" line, in fact even with other values taken from the web, I always get unsatisfactory results. But isn't there any way to put the correct values based on my monitor?

    There is no "perfect" setting as they all need to be adjusted on a case by case basis depending on what the monitor needs. So in short, someone elses values could completely screw you up if they varied drastically from your original values.



Want to support us ?

393
Online

79.6k
Users

21.0k
Topics

153.7k
Posts