Raspberry Pi 4

For information, Recalbox IS NOT compatible with Raspberry Pi 4 yet.
Pour information, Recalbox N'EST PAS encore compatible avec le Raspberry Pi 4.

The Recalbox Team.

Bluetooth dongle problem



  • Hi,

    I have raspberry 3 pi b+ and recalbox 6.0 installed, but my bluetooth dongle not recognize. I want to pair my ps3 controllers at dongle because of the big delay.

    My dongle is a Chipset: CSR8510 and 4.0 version.

    Here, some comands and results at terminal:

    hciconfig -a
    hci1: Type: Primary Bus: UART
    BD Address: B8:27:EB:7A:20:DB ACL MTU: 1021:8 SCO MTU: 64:1
    UP RUNNING
    RX bytes:1018 acl:0 sco:0 events:48 errors:0
    TX bytes:2248 acl:0 sco:0 commands:48 errors:0
    Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
    Link policy: RSWITCH SNIFF
    Link mode: SLAVE ACCEPT
    Name: 'BlueZ 5.47'
    Class: 0x000000
    Service Classes: Unspecified
    Device Class: Miscellaneous,
    HCI Version: 4.1 (0x7) Revision: 0xb6
    LMP Version: 4.1 (0x7) Subversion: 0x2209
    Manufacturer: Broadcom Corporation (15)

    hci0: Type: Primary Bus: USB
    BD Address: 00:1A:7D:DA:71:11 ACL MTU: 679:9 SCO MTU: 48:16
    DOWN
    RX bytes:1722 acl:0 sco:0 events:90 errors:0
    TX bytes:1104 acl:0 sco:0 commands:90 errors:0
    Features: 0xff 0xff 0xcd 0xfa 0xdb 0xbf 0x7b 0x87
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
    Link policy: RSWITCH HOLD SNIFF PARK
    Link mode: SLAVE ACCEPT

    hciconfig hci0 up

    Can't init device hci0: Operation not supported (95)

    dmesg | grep too

    [ 4.634606] Bluetooth: Core ver 2.22
    [ 4.634773] Bluetooth: HCI device and connection manager initialized
    [ 4.634798] Bluetooth: HCI socket layer initialized
    [ 4.634812] Bluetooth: L2CAP socket layer initialized
    [ 4.634849] Bluetooth: SCO socket layer initialized
    [ 11.869152] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 11.869164] Bluetooth: BNEP filters: protocol multicast
    [ 11.869183] Bluetooth: BNEP socket layer initialized
    [ 16.332505] Bluetooth: HCI UART driver ver 2.3
    [ 16.332519] Bluetooth: HCI UART protocol H4 registered
    [ 16.332525] Bluetooth: HCI UART protocol Three-wire (H5) registered
    [ 16.333372] Bluetooth: HCI UART protocol Broadcom registered

    Can somebody help me ? Thanks


  • Staff
    Team
    Moderator
    Translator

    @tiagoko how are you trying to pair your controller?
    And why a bluetooth dongle with the rpi3b+? Imo, it works pretty well with the internal.



  • Hi @paradadf ,

    It's because of the delay comands.

    Let's me explain:

    When i press a Button, i have noted a delay to game response. It's not ocorred when i connected the controller at USB cable.

    i pair the controller connecting the cable USB, then i wait for 10 seconds and remove the cable. Few seconds after, the controler is paired. This don't connected when i plug bluetooth dongle, Just with internal Bt.

    sorry my english.


  • Staff
    Team
    Moderator
    Translator

    @tiagoko I don‘t have the delay on the pi3b+, but only on the 3b. But ok. Why do you say your dongle isn‘t recognized? It appears to me it is working properly.



  • Not appear the Manufacturer from bluetooth dongle, so i think that i need install a driver to be recognized.
    When i tryied to start USB Bluetooth with comand hciconfig hci1 up, says that operation is not permited.

    And when i connect the dongle, the controller not pair with it.

    Do you know How configure and start Bluetooth?

    Thanks


Log in to reply
 

Want to support us ?

303
Online

62623
Users

18685
Topics

140317
Posts

Looks like your connection to Recalbox Forum was lost, please wait while we try to reconnect.