[TOOL] BestArcade sorting tool

[Kaoru_Requiem]

Ce que j'ai fait pour le moment, c'est que j'ai laissé en NONE avec les répertoires par genre et j'ai ensuite supprimé les repertoires [gun] et [race] dans FBA

[voljega]

@kaoru_requiem Hello j'ai implémenté les deux fonctionnalités que tu avais demandé, je ne sais pas si tu passes toujours par là

En tout cas version 0.2 dispo sur mon github

0.2 Notes :

EN

• Added prefered set and prefered set for genre features, to be used only with STRICT mode
• WARNING This version is not yet fully compatible with fba_libretro FBA 0.2.97.44 used in Recalbox 6.0 RC1/2/3/Finale due to my beeing unable to find a correct romset for it
  However if you wish to use this romset, just copy your dat for FBA 0.2.97.44 in data folder in place of the name for FBA 0.2.97.43 (so keep the same filename 'FBAlphav0.2.97.43.dat' and then point fba_libetro parameter in conf.conf to your 0.2.97.44 romset folder, it should work

FR

• Ajout des fonctionnalitées prefered set et prefered set for genre, utilisable en mode STRICT uniquement
• ATTENTION Cette version n'est pas encore entièrement compatible avec fba_libretro FBA 0.2.97.44 utilisé dans Recalbox 6.0 RC1/2/3/Finale car je n'ai pas trouvé de romset correct pour l'instant.
  Cependant si vous voulez utiliser ce nouveau romset, il suffit de copier votre dat pour FBA 0.2.97.44 dans le folder data à la place du dat FBA 0.2.97.43 (donc gardez le même nom de fichier 'FBAlphav0.2.97.43.dat') et de modifier ensuite le paramètre fba_libetro dans conf.conf vers le répertoire de votre romset 0.2.97.44 folder, ça devrait marcher

[cissou]

@voljega pour le romset 44 de fba, prends comme base mame 0.208 pour le construire, va te manque deux roms pour deux set de hack

[voljega]

@cissou said in [TOOL] BestArcade sorting tool:

va te manque deux roms pour deux set de hack

J'en ai un mais il est chelou divisé en deux, avec des jeux dans un répertoire et d'autres dans un répertoire debug, et le set n'est pas non merged... Faut juste que je trouve le courage d'utiliser clrmamepro et il m'en faut beaucoup beaucoup

[cissou]

4 ou 5 click et le romset est buildé

[voljega]

@cissou ouais un peu plus que ça et surtout faut cliquer sur des trucs abscons super mal nommé avec une UX qui même il y a 15 ans avait 15 ans de retard, c'est vraiment une plaie ce soft

[anthony33]

Super outil, bravo. J'espère que de nouvelles fonctionnalités vont arriver

[voljega]

@anthony33 pourquoi pas, mais quoi comme fonctionnalités ? je suis ouvert aux propositions

[johnodon]

Great tool...thank you for creating it.

Request: Is it possible to only create CSVs without copying ROMs? I want to have the lists of best core per rom but plan on creating my own collections based on genre and will move ROMs manually.

Thanks

[voljega]

@johnodon yes this is actually pretty easy to do I will add it

[johnodon]

Some observations/questions...

I am using the FBA 0.2.97.44 DAT. My conf is as follows:

exportDir = E:\Downloads\BestArcade-0.1\BestArcade\MySet
fbaSet = Z:\ROMS\Arcade\FBA\FB Alpha 0.2.97.44 non-merged\roms
mame2010Set = Z:\ROMS\Arcade\MAME\MAME_2010_full_nonmerged_romsets\roms
mame2003Set = Z:\ROMS\Arcade\MAME\MAME_2003-Plus_Reference_Set_2018\roms
keepLevel=0
keepNotTested=0
exclusionType = STRICT
genreSubFolders=1

Do the CSVs in the data folder ever get refreshed? I noticed that the all have dates from July 2018.

If a ROM scores 3 for every emulator, does it use FBA as the default? (the question below is related)

64street has the same score (3) for all sets. It was copied only to the FBA folder.

• What do the errors below suggest? Is this the expected result and can these errors be ignored?
• Is FBA used as the default emulator for all roms that have tie scores?

Possible errors
ERROR 64street should be exported for mame2003
ERROR 64street should be exported for mame2010

If I set 'keepNotTested=1', the tool will keep a copy of the rom for the emulators that were not tested even if the other emulator has a score of '3'. Is this expected or could we put some more control around this (i.e. if one emulator has a high score do not copy to the other emulator folders)?

[voljega]

@johnodon said in [TOOL] BestArcade sorting tool:
First, unless I made a mistake you seem to use the old version ?
In latest 0.2 version conf.conf params for sets should be :
fba_libretro =
mame2010 =
mame2003 =

not fbaSet, mame2010Set and mame2003Set like you have ?

Do the CSVs in the data folder ever get refreshed? I noticed that the all have dates from July 2018.

This csv are the test sets, there is nothing to refresh at the moment, as the sets have been fully tested for a while, but once again I didn't upgrade to latest fba_libretro yet, so I didn't test all the games added in latest version.
For me it doesn't make much sense to test the new fba now anyway, as new games are added to it every week, I will test them when fba_libretro 44 has a final version and when it is integrated into recalbox.

If a ROM scores 3 for every emulator, does it use FBA as the default? (the question below is related)
64street has the same score (3) for all sets. It was copied only to the FBA folder.

Because you used STRICT for exclusionType, use EQUAL if you want to keep all three of them (this and other options are in the readme and in comments in conf file)

What do the errors below suggest? Is this the expected result and can these errors be ignored?

I wouldn't pay to much attention to the errors, it's mostly checking for myself when I debug, and it's not very clean, I should hide or enrich it (the one you had shows it doesn't take exclusionType correctly into account)

Is FBA used as the default emulator for all roms that have tie scores?

Once again this is in the README, there are several parameters for prefered set like preferedSet which is set to fbaLibretro by default This is only used in STRICT mode

If I set 'keepNotTested=1', the tool will keep a copy of the rom for the emulators that were not tested even if the other emulator has a score of '3'. Is this expected or could we put some more control around this (i.e. if one emulator has a high score do not copy to the other emulator folders)?

Yes this is expected, the purpose is specifically to keep non tested roms to see how they work
If you do no wish to keep untested roms, put keepNotTested to 0

[johnodon]

@voljega said in [TOOL] BestArcade sorting tool:

@johnodon said in [TOOL] BestArcade sorting tool:
First, unless I made a mistake you seem to use the old version ?
In latest 0.2 version conf.conf params for sets should be :
fba_libretro =
mame2010 =
mame2003 =

not fbaSet, mame2010Set and mame2003Set like you have ?

Ooops...the link at the top of this thread still points to v0.1 and that is what I downloaded. I'll start over.

TY for the other answers.

John

[voljega]

New version 0.3 release
https://github.com/Voljega/scripts4recalbox/releases/tag/0.3

• Compatible with latest Recalbox 6.0, updated to fba_libretro 0.2.97.44
• Added Dry Run mode as asked by @johnodon , allowing generating only csv and dat files without copying roms

[voljega]

New version 0.4 release
https://github.com/Voljega/scripts4recalbox/releases/tag/0.4

• Bug fixes
• Add scraping using flyers, titles, snapshots or any image folder

[voljega]

New version 0.5 release
https://github.com/Voljega/scripts4recalbox/releases/tag/0.5

• Added GUI for easier configuration

[kevinnash]

Hello, I got this error with last version 0.5 :

<--------- Verify Parameters --------->
mame2010 folder does not exist
mame2003 folder does not exist
Exception in Tkinter callback
Traceback (most recent call last):
File "tkinter_init_.py", line 1699, in call
File "gui.py", line 366, in clickVerify
KeyError: 'Images folder #2'

<--------- Starting Process --------->
Exception in Tkinter callback
Traceback (most recent call last):
File "tkinter_init_.py", line 1699, in call
File "gui.py", line 377, in clickProceed
File "gui.py", line 354, in saveConfInMem
KeyError: 'Images folder #2'

Can you help me ?

[voljega]

@kevinnash ah yeah I think I see the problem, try adding a second image folder in conf.conf after a '|' after the first one, even an non-existing one.

Then launch the tool

[kevinnash]

Hi,

Thank you for the fast answer, it works well with :

images = E:\ROMS\Images|E:\ROMS\Images2

[voljega]

@kevinnash ok, thanks for finding a nice bug, I will correct it in next version !