Problème wifi



  • Bonjour,
    depuis quelques jours ma connection wifi ne marche plus alors quelle marchait trés bien
    donc j'ai reformaté ma carte sd et ré-installer la dernière version de recalbox (13/07) mais toujours pareil !!!
    quand je rentre dans option réseau j'active la wifi (On) puis je valide et je me rend compte que je ne capte plus ma Freebox-xxxxx mais par contre je capte la box de la voisine !!!?
    Donc je rentre en manuel ma box + Clé, je valide celà me dit wifi "activé"
    mais quand je sors et reviens sur option réseau toujours pas de connection
    que faire SVP
    peut-on scrapper et faire les futures mises à jours par RJ45 ?
    je pense que non !!!
    votre aide serait la bien venue
    Merci Par avance
    Amicalement
    Philippe



  • @demonjojo as tu essayé en éteignant et en rallumant ta box ?
    Tu peux tout à fait utiliser le RJ45 pour scraper et faire tes mises à jour, c'est même recommandé.


  • Moderator
    Moderator
    Team

    @demonjojo dans recalbox.conf passe en wifi.region=FR



  • Merci pour vos 2 réponses
    j'ai reboot la freebox et j'ai modifier aussi le dossier "recalbox backup" de US en FR
    aprés tout ça rien de mieux
    que faire svp !!!
    Amicalement
    Philippe


  • Moderator
    Moderator
    Team

    @demonjojo comment ça le dossier "recalbox backup" ?



  • Oui j'ai 2 fichiers
    -Recalbox backup
    -Recalbox Boot
    Amicalement
    J'ai 4 cartes miniSd et une fonctionnait j'ai donc copié les 2 dossiers sur les trois autres ou je ne pouvais plus me connecter et cela à marché
    et voici ce qu'il y a dedans et maintenant ça marche :
    #THIS IS A BACKUP OF RECALBOX.CONF
    #PLEASE DO NOT MAKE ANY CHANGE HERE !!!

    System Variable

    You can configure your recalbox from here

    To set a variable, remove the first ; on the line

    ------------ A - System Options -----------

    Uncomment the system.power.switch you use

    ;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
    ;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
    ;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
    ;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
    ;system.power.switch=WITTYPI # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi
    ;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
    ;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
    ;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
    ;system.power.switch=PIN356PUSHRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)

    fbcp FrameBuffer Copy Program

    For small TFT screen on GPIO and SPI

    See https://github.com/recalbox/recalbox-os/wiki/Utility---Use-of-fbcp-for-small-TFT-screen-%28EN%29 for details

    Needed for Waveshare 3.2" 3.5" TFT screen, 2.8" Adafruit screen

    See https://github.com/recalbox/recalbox-os/wiki/TFT-Screen-SPI-Bus-(EN)

    for support and configuration details needed by /boot/config.txt

    system.fbcp.enabled=0

    Splash screen duration

    0: Video will be played for 20 seconds (default)

    -1: All the video will be played (it won't be stopped automatically)

    >0 : Time before the video will be stopped (in seconds)

    system.splash.length=0

    Recalbox Manager (http manager)

    system.manager.enabled=1

    1 or 2, depending on the manager version you wish

    system.manager.version=2

    Recalbox security

    enforce security

    samba password required

    disable virtual gamepads

    system.security.enabled=0

    Recalbox API (REST)

    system.api.enabled=0

    Allow a specific resolution for ES only from the command : tvservice -m [MODE]

    Leave commented for the default usual behaviour

    ;system.es.videomode=CEA 4 HDMI

    EmulationStation

    menu style

    default -> default all options menu

    none -> no menu except the game search menu

    bartop -> less menu, only needed for bartops

    emulationstation.menu=default

    Select a system to show on boot (use rom directory name) (string)

    emulationstation.selectedsystem=favorites

    Show the gamelist of the first or selected system on boot (0,1)

    emulationstation.bootongamelist=0

    Disable system view ES will boot and show ONLY the first or selected system (0,1)

    emulationstation.hidesystemview=0

    Parse Gamelists only. Show only games listed in gamelist.xml files (0,1)

    emulationstation.gamelistonly=0

    Force basicgameList view to be displayed, even if your game systems are scraped (0,1)

    emulationstation.forcebasicgamelistview=0

    Emulator special keys

    default -> default all special keys

    nomenu -> cannot popup the emulator menu

    none -> no special keys in emulators

    system.emulators.specialkeys=default

    Show or hide kodi in emulationstation (0,1)

    kodi.enabled=1

    Start kodi at launch (0,1)

    kodi.atstartup=0

    set x button shortcut (0,1)

    kodi.xbutton=1

    Allow a specific resolution for Kodi only from the command : tvservice -m [MODE]

    By default is using the default resolution of your screen

    kodi.videomode=default

    Kodi can wait for a network component before starting

    waithost is the ip or hostname that must answer to a ping to validate the availability

    waittime is the maximum time waited when kodi boots

    if waitmode is required, kodi will not start if the component is not available

    if waitmode is wish, kodi will start if the component is not available

    if waitmode is not set or has another value, kodi will start immediately

    ;kodi.network.waitmode=required
    ;kodi.network.waittime=10
    ;kodi.network.waithost=192.168.0.50

    Hyperion

    Hyperion allows you to use an ambilight like led system on your recalbox

    Use hypercon to create your configuration file, and copy it in /recalbox/share/system/configs/hyperion/hyperion.config.json

    hyperion.enabled=0

    ------------ B - Network ------------

    Set system hostname

    system.hostname=RECALBOX

    Activate wifi (0,1)

    wifi.enabled=1

    Set wifi region

    More info here: https://github.com/recalbox/recalbox-os/wiki/Wifi-country-code

    wifi.region=US

    Wifi SSID (string)

    wifi.ssid=Freebox-6005D8

    Wifi KEY (string)

    after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"

    you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot

    Escape your special chars (# ; $) with a backslash : $ => $

    wifi.key=exultat?9-certet32-obtegi5*-radendo

    secondary wifi (not configurable via the user interface)

    ;wifi2.ssid=new ssid
    ;wifi2.key=new key

    third wifi (not configurable via the user interface)

    ;wifi3.ssid=new ssid
    ;wifi3.key=new key

    Samba share

    system.samba.enabled=1

    Virtual Gamepads

    system.virtual-gamepads.enabled=1

    SSH

    system.ssh.enabled=1

    ------------ C - Audio ------------

    Set the audio device (auto, hdmi, jack)

    audio.device=auto

    Set system volume (0..100)

    audio.volume=90

    Enable or disable system sounds in ES (0,1)

    audio.bgmusic=1

    -------------- D - Controllers -----------------

    Enable support for standard bluetooth controllers

    controllers.bluetooth.enabled=1

    Please enable only one of these

    -------------- D1 - PS3 Controllers ------------

    ##Enable PS3 controllers support
    controllers.ps3.enabled=1

    Choose a driver between bluez, official and shanwan

    bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis

    official -> sixad drivers, support official and gasia sisaxis

    shanwan -> shanwan drivers, support official and shanwan sisaxis

    controllers.ps3.driver=bluez

    ------------ D2 - GPIO Controllers ------------

    GPIO Controllers

    enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)

    controllers.gpio.enabled=0

    mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)

    controllers.gpio.args=map=1,2

    ------------ D3 - Steam Controllers ------------

    Enable steam controller service

    controllers.steam.enabled=0

    DB9 Controllers

    Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)

    controllers.db9.enabled=0

    db9 arguments

    controllers.db9.args=map=1

    Gamecon controllers

    Enable gamecon controllers, for nes, snes psx (0,1)

    controllers.gamecon.enabled=0

    gamecon_args

    controllers.gamecon.args=map=1

    XGaming's XArcade Tankstik and other compatible devices

    controllers.xarcade.enabled=1

    ------------ F - Language and keyboard ------------

    Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)

    system.language=fr_FR

    set the keyboard layout (fr,en,de,us,es)

    ;system.kblayout=us

    Set you local time

    Select your timezone from : ls /usr/share/zoneinfo/ (string)

    ;system.timezone=Europe/Paris

    ------------ G - UPDATES ------------

    Automatically check for updates at start (0,1)

    updates.enabled=1

    Update type : default to stable

    updates.type=stable

    ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------

    The global value will be used for all emulators, except if the value

    is redefined in the emulator

    Set game resolution for emulators

    select your mode from the command : tvservice -m [MODE]

    CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced

    CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive

    use 'default' for using the default resolution

    use 'auto' : switches to CEA 4 HDMI if supported, else keep the current resolution

    (string)

    global.videomode=CEA 4 HDMI

    Shader set

    Automatically select shaders for all systems

    ## (none, retro, scanlines)
    global.shaderset=none

    Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)

    global.integerscale=0

    Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)

    global.shaders=

    Set ratio for all emulators (auto,4/3,16/9,16/10,custom)

    global.ratio=auto

    Set smooth for all emulators (0,1)

    global.smooth=1

    Set rewind for all emulators (0,1)

    global.rewind=1

    Set autosave/load savestate for all emulators (0,1)

    global.autosave=0

    Enable retroarchievements (0,1)

    Set your www.retroachievements.org username/password

    Escape your special chars (# ; $) with a backslash : $ => $

    global.retroachievements=0
    global.retroachievements.hardcore=0
    global.retroachievements.username=
    global.retroachievements.password=

    Set retroarch input driver (auto, udev, sdl2)

    If you don't have issues with your controllers, let auto

    global.inputdriver=auto

    If you do not want recalboxOS to generate the configuration for all emulators (string)

    ;global.configfile=/path/to/my/configfile.cfg

    ------------ I - EMULATORS CHOICES -----------

    You can override the global configuration here

    Here is the snes example

    ;snes.videomode=CEA 4 HDMI
    snes.core=snes9x_next
    ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
    ;snes.ratio=16/9
    ;snes.smooth=0
    ;snes.rewind=1
    ;snes.autosave=0
    ;snes.emulator=libretro
    ;snes.integerscale=0

    If you do not want recalboxOS to generate the configuration for the emulator :

    ;snes.configfile=/path/to/my/configfile.cfg

    Default cores for RPi3

    snes.core=snes9x_next
    gba.core=mgba
    mame.core=mame078
    nes.core=fceunext

    NeoGeo emulator

    You can use pifba or a libretro core (fba2x,libretro)

    neogeo.emulator=libretro

    If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)

    neogeo.core=fba

    N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)

    So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).

    If your screen is not compatible with one of these video modes, please check the recalbox's wiki.

    n64.videomode=DMT 4 HDMI

    If you are using a CRT screen, please change the setting above with this one :

    n64.videomode=default

    Dreamcast emulator

    Like N64, such a CPU intensive emulator needs a small resolution

    Consider DMT 4 HDMI (640480) or DMT 9 HDMI (800600). If you have a black screen on dreamcast, try DMT 9 HDMI here

    dreamcast.videomode=DMT 4 HDMI

    ------------ J - NETPLAY PARAMETERS -----------

    All the valuez here are handled by Recalbox itself

    global.netplay=1
    global.netplay.nickname=
    global.netplay.port=55435
    global.netplay.relay=
    global.netplay.systems=fba_libretro,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,sg1000,snes,supergrafx
    global.netplay.lobby=http://lobby.libretro.com/list/

    Configurations generated by Recalbox

    Merci encore de votre aide
    Amicalement
    Philippe


  • Moderator
    Moderator
    Team

    @demonjojo non il ne faut pas modifier ce fichier là, ce n'est qu'une copie comme son nom l'indique...

    C'est clairement marqué dedans en plus:

    #THIS IS A BACKUP OF RECALBOX.CONF
    #PLEASE DO NOT MAKE ANY CHANGE HERE !!!
    

    il faut modifier le recalbox.conf et non recalbox-backup.conf qui se trouve non pas dans /boot mais dans le dossier share !



  • Merci ok j'ai compris
    mais j'ai remarqué que wifi.region=US reste meme si je le change en FR mais c'est pas grave ça marche sur US
    j'ai une autre question c'est sur le fichier de sauvegarde de tous mes scores et records sur Mame le jeu est "Track and Field" comment faire pour les re-installer du fait que j'ai tout re-installé je les aient perdus ou peut-il se trouver ce fichu fichier !!!
    Merci par avance
    Amicalement
    Philippe
    Oops j'ai oublié de dire que j'avais une sauvegarde de ma carte MiniSD avant de reformater
    se que je voudrais savoir c'est ou se trouve ce fichier dans ma sauvegarde pour que je puisse le remplacer dans ma nouvelle carteMinisd
    Merci encore pour votre soutien
    Amicalement
    Philippe


Log in to reply
 

Want to support us ?

Join us on :

165
Online

28821
Users

14643
Topics

110694
Posts

Looks like your connection to Recalbox Forum was lost, please wait while we try to reconnect.