Problema con X-arcade 2players

[azo]

@Substring
Aqui esta el archivo.

https://www.dropbox.com/s/z1wo8fbq77r62jv/recalbox-support-20170627192008.tar.gz?dl=0

[azo]

@Substring

https://www.dropbox.com/s/z1wo8fbq77r62jv/recalbox-support-20170627192008.tar.gz?dl=0
Aqui esta el archivo.

Alguna solucion??

[Substring]

@azo your custom.sh can't be working : xarcade2jstick is not launched a 2nd time in the boot process

[azo]

@Substring
Como puedo arreglarlo?alguna idea?
Si me puedes poner pasos detallados te lo agradeceria, o los comandos para pegarlos directamente en el putty.

[Substring]

@azo There is a trick, if you know how to edit a file under linux (with WinSCP for example). In SSH type mount, -o remount, rw /

Then edit /etc/init.d/S26recalboxsystem and replace rb_xarcade2jstick& # 0.1 by ( sleep 8 ; rb_xarcade2jstick ) & # 0.1. Reboot, and it should work (at least that's the fix that wil be in the stable 4.1)

[azo]

@Substring
Edite
/etc/init.d/S26recalboxsystem
Reemplace rb_xarcade2jstick& # 0.1 por ( sleep 8 ; rb_xarcade2jstick ) & # 0.1
Recalbox.conf esta correcto
Puedo manejar el menu pero en los juegos no funciona.
No detecta el xarcade como controller, no consigo que funcione.
Creo que necesito explicacion para dummy XD

[azo]

No consegui hacerlo funcionar...alguna novedad o idea nueva??

[Substring]

@azo please speak english I don't understand spanish that good.

[azo]

@Substring I have not been able to play with the x-arcade yet, recalbox detects x-arcade as keyboard not as two controllers.
I could do something wrong.
I think I need more easy and more detailed steps please.
Thank you very much for your patience and help me
My x-arcade is V1 and I connect it with the official cable to usb

[Substring]

@azo ok V1 xarcade seem not to work, indeed. I'd need to dig a little more. Can you make a support archive ? Even, they are PS2 only, this would be quite dependant on the usb key you.d use to connect the xarcade. But there is an upgrade module to get native usb (56€ in France)

[azo]

@substring said in Problema con X-arcade 2players:

Can you make a support archive ?

I did it before.I upload the archive at dropbox. You can find it here " https://www.dropbox.com/s/z1wo8fbq77r62jv/recalbox-support-20170627192008.tar.gz?dl=0 "
do you need another one?
I connect the x-arcade with the official adapter to usb. I have the original usb(pc) x-adapter and the playstation 2 x-adapter too.
If doesn´t work with recalbox i will use another control-pad to play with rasp3 because i think that 56€ is expensive only for use with recalbox.
The x-arcade works fine with another emulators on my pc.
Thank you for your help

[Substring]

@azo Yeah ok, foudn the problem ...
Either you wait for a recalbox update that I add your device (i can't say i'm in a hurry for this now), either you follow the wiki https://github.com/recalbox/recalbox-os/wiki/Keyboard-encoder-configuration-(EN)#adding-your-own-keyboard-encoder. The devices you should test are :

/dev/input/by-id/usb-Xgaming_X-Arcade-if01-event-kbd
/dev/input/by-id/usb-Xgaming_X-Arcade-event-kbd

[azo]

@substring said in Problema con X-arcade 2players:

/dev/input/by-id/usb-Xgaming_X-Arcade-if01-event-kbd
/dev/input/by-id/usb-Xgaming_X-Arcade-event-kbd

Great!! it works!!!!
thank you so much for your help and patience

[Substring]

@azo May I ask you a link to the device you used to convert your PS2 to USB ?

[azo]

@substring
I use the original X-arcade´s "X-adapter System USB Adapter".I don´t find it in the x-arcade web,is old.Remember my x-arcade is v.1
I can find this picture only
https://goo.gl/images/Bz5H6s