GPIO joystick and buttons issue

[Substring]

@ivolourenco said in GPIO joystick and buttons issue:

cp /recalbox/share_init/system/.emulatoions

This is not the command I wrote, please read again

[IvoLourenco]

@Substring sorry for that, output below.

"""# /etc/init.d/S31emulationstation stop

lvl0: Could not find <gameList> node in gamelist "/recalbox/share/roms/amstradcpc/gamelist.xml"!

lvl0: Could not find <gameList> node in gamelist "/recalbox/share/roms/gba/gamelist.xml"!
lvl0: Could not find <gameList> node in gamelist "/recalbox/share/roms/snes/gamelist.xml"!
ERROR - tried to write to log file before it was open! The following won't be logged:
lvlERROR - tried to write to log file before it was open! The following won't be logged:

cp /recalbox/share_init/system/.emulations

BusyBox v1.25.1 (2017-10-12 19:45:17 UTC) multi-call binary.

Usage: cp [OPTIONS] SOURCE... DEST

Copy SOURCE(s) to DEST

    -a      Same as -dpR
    -R,-r   Recurse
    -d,-P   Preserve symlinks (default if -R)
    -L      Follow all symlinks
    -H      Follow symlinks on command line
    -p      Preserve file attributes if possible
    -f      Overwrite
    -i      Prompt before overwrite
    -l,-s   Create (sym)links
    -u      Copy only newer files

/etc/init.d/S31emulationstation start

lvl0: Could not find <gameList> node in gamelist "/recalbox/share/roms/amstradcpc/gamelist.xml"!

lvl0: Could not find <gameList> node in gamelist "/recalbox/share/roms/gba/gamelist.xml"!
lvl0: Could not find <gameList> node in gamelist "/recalbox/share/roms/snes/gamelist.xml"!
lvl0: System "favorites" is missing name, path, extension, or command!
lo IP Address 127.0.0.1
eth0 IP Address 169.254.119.52
curl: (6) Couldn't resolve host 'recaleur-archive-prod.recalbox.com'"""

[Substring]

@ivolourenco the cp command is not correctly typed. I tried it on my recalbox and it works.
When reporting, please use such `bback quotes, not double quotes

[IvoLourenco]

@Substring All buttons responding. Seems incorrectly setup though. Shall I remap them?

And what have i done... with the commands you suggested?

# lvl0:         Could not find <gameList> node in gamelist "/recalbox/share/roms/amstradcpc/gamelist.xml"!
lvl0:   Could not find <gameList> node in gamelist "/recalbox/share/roms/gba/gamelist.xml"!
lvl0:   Could not find <gameList> node in gamelist "/recalbox/share/roms/snes/gamelist.xml"!
ERROR - tried to write to log file before it was open! The following won't be logged:
# cp /recalbox/share_init/system/.emulations/es_input.cfg ~/
cp: can't stat '/recalbox/share_init/system/.emulations/es_input.cfg': No such file or directory
# cp /recalbox/share_init/system/.emulationstation/es_input.cfg ~/.emulationstation
# /etc/init.d/S31emulationstation start
# lvl0:         Could not find <gameList> node in gamelist "/recalbox/share/roms/amstradcpc/gamelist.xml"!
lvl0:   Could not find <gameList> node in gamelist "/recalbox/share/roms/gba/gamelist.xml"!
lvl0:   Could not find <gameList> node in gamelist "/recalbox/share/roms/snes/gamelist.xml"!
lvl0:   System "favorites" is missing name, path, extension, or command!
lo IP Address 127.0.0.1
eth0 IP Address 169.254.119.52
curl: (6) Couldn't resolve host 'recaleur-archive-prod.recalbox.com'
==============================================
==============================================

[Substring]

@ivolourenco Incorrectly setup ? If you followed the wiring diagram + buttons layout like :
Y X L
B A X

You shouldn't have to remap. But ok, try remapping now you know how to reset the mapping

[IvoLourenco]

@substring going to start drilling the button now!

I just noticed that when i push up it goes down... so may be there is a issue on the setup of wiring.

However, I did a run on remapping but it still does not recognise after A button

Thanks

[Substring]

@ivolourenco can you go to http://recalbox while trying to remap, and make a screenshot of Recalbox when you're stuck at remapping ? You can post it here using the small cloud icon with an arrow, no need to drop it on some website

[IvoLourenco]

@substring so this what i do:

1. Main Menu/ Controller Settings

2. 2 Gamepads detected (picture below)
   

3. Press A and start the configuration (joystick configured - Picture below)

4. A button configured as Button 1 and after this none of the others are recognised.
   

[Substring]

@ivolourenco so no button would work once A is assigned ? They all work on evtest, i don't get it ... unless you mixed P1 and P2 ...

[IvoLourenco]

@substring yes basically none work after A is assigned.

How could P1 or P2 affect that? I’m using the GPIO layout proposed within the wiki.

Is there a way within evtest to understand that the button is assigned to the correct GPIO pin?

[Substring]

@ivolourenco nope evtest just reports which event has been triggered. I still believe that if you're saying the layout is not right, then the wiring is wrong

[IvoLourenco]

@substring so I setup my buttons, initiate a game. And then when I have a game loaded at the insert coin (metal slug) or 1 player game (mario) there is no response from any button. I do not have an hot key specific button.

I tried once again to remap my buttons but it does not work as mentioned above.all the wiring is ok as per schematic.

Any thoughts?

[Substring]

@ivolourenco someone has the same kind of issue but for dreamcast only. Can you make ansupport archive ?

[IvoLourenco]

@substring after some more testing this occur within Neo Geo, Name, PlayStation. I can play some games of Nintendo not all.

Support Archive is a separate topic? (Sorry for the noob questions)

[Substring]

@ivolourenco go to http://recalbox/help and make a support archive, post the generated link here

[IvoLourenco]

@Substring Page not found (404) - Below.

Page not found (404)
Request Method: GET
Request URL: http://recalbox/help
Using the URLconf defined in project.urls, Django tried these URL patterns, in this order:
^media/(?P<path>.)$
^500/$
^404/$
^static/(?P<path>.)$
^ ^$ [name='home']
^ ^bios/$ [name='bios']
^ ^bios/upload$ [name='bios-upload']
^ ^config/$ [name='config']
^ ^monitoring/$ [name='monitoring']
^ ^logs/$ [name='logs']
^ ^systems/$ [name='roms-systems']
^ ^systems/roms/(?P<system>\w+)/$ [name='roms-list']
^ ^systems/roms/(?P<system>\w+)/upload/$ [name='roms-upload']
The current URL, help, didn't match any of these.
You're seeing this error because you have DEBUG = True in your Django settings file. Change that to False, and Django will display a standard 404 page.

[Substring]

@ivolourenco which recalbox version do you have ? Don't tell me you're still on 4.0 ?

[IvoLourenco]

@substring was 4.0 because I could not found roms... so i was using a compile file to try some games.

Changed to the 4.1 and did the support archive, same problems regarding the mapping. (https://file.ac/DaGZwV_MA-U/)

Can we discuss roms subjec on Kiwi IRC? Let me know when suits you.

[Substring]

@ivolourenco errrr ... Tomorrow (10th of November) 9pm CETi should be on IRC

I still believe in a wiring problem ...

[IvoLourenco]

@substring as i will travelling home at that time can we make it sat**day (11th)? Or sunday.

Wiring you mean positioning within the GPIO? If that would be the case we still would have the response when mapping. And the problem is that some of the games work and the buttons work..