2 Jan 2017, 18:23

@Substring Et bien voilà je pense que c'est bon.

Peux-tu juste jeter un petit coup d'oeil à mon fichier:

# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1

disable_overscan=0

# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1

# comment to get jack audio
#hdmi_drive=2

config_hdmi_boost=0

# force hdmi while the tv can take time before sending the signal on the hdmi output
hdmi_force_hotplug=1

# uncomment for composite PAL
sdtv_mode=2
hdmi_ignore_hotplug=1

# uncomment for lirc-rpi
#dtoverlay=lirc-rpi

# if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or give a low resolution because tv had no enough time to initialize it
boot_delay=3

# uncomment if you don't want the rainbow at startup
disable_splash=1

# Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512

avoid_safe_mode=1

kernel=zImage

# NOOBS Auto-generated Settings:
# hdmi_force_hotplug=1
overscan_scale=1

Par contre c'est bizarre car j'ai pas su me connecter sur putty, je suis passé via winscp. Putty sert a quoi dans l'histoire?

Et dans recalbox.conf j'ai indiqué n64.videomode=DMT 9 HDMI en modifiant le 4 en 9 et j'ai supprimé la ligne n64.videomode=default

Comme ceci:

## N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)
## So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).
## If your screen is not compatible with one of these video modes, please check the recalbox's wiki.
n64.videomode=DMT 9 HDMI
## If you are using a CRT screen, please change the setting above with this one : 


## Configurations generated by Recalbox

Merci d'avance.