24 Mar 2016, 19:24

je copie le recalbox.conf, Je ne trouve pas le /boot/config.txt en revanche   # System Variable # You can configure your recalbox from here # To set a variable, remove the first ; on the line       # ------------ A - System Options ----------- # #    Uncomment the system.power.switch you use ;system.power.switch=ATX_RASPI_R2_6      # http://lowpowerlab.com/atxraspi/#installation ;system.power.switch=MAUSBERRY           # http://mausberry-circuits.myshopify.com/pages/setup ;system.power.switch=REMOTEPIBOARD_2003  # http://www.msldigital.com/pages/support-for-remotepi-board-2013 ;system.power.switch=REMOTEPIBOARD_2005  # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015   ## Recalbox Manager (http manager) system.manager.enabled=1   ## Recalbox API (REST) system.api.enabled=0   ## EmulationStation menu style ## default -> default all options menu ## none -> no menu except the game search menu ## bartop -> less menu, only needed for bartops system.es.menu=default   ## Emulator special keys ## default -> default all special keys ## nomenu -> cannot popup the emulator menu ## none -> no special keys in emulators system.emulators.specialkey=default   ## Show or hide kodi in emulationstation (0,1) kodi.enabled=1 ## Start kodi at launch (0,1) kodi.atstartup=0 ## set x button shortcut (0,1) kodi.xbutton=1   ## Kodi can wait for a network component before starting ## waithost is the ip or hostname that must answer to a ping to validate the availability ## waittime is the maximum time waited when kodi boots ## if waitmode is required, kodi will not start if the component is not available ## if waitmode is wish, kodi will start if the component is not available ## if waitmode is not set or has an other value, kodi will start immediatly ;kodi.network.waitmode=required ;kodi.network.waittime=10 ;kodi.network.waithost=192.168.0.50   # ------------ B - Network ------------ # ## Set system hostname system.hostname=RECALBOX ## Activate wifi (0,1) wifi.enabled=0 ## Wifi SSID (string) ;wifi.ssid=new ssid ## Wifi KEY (string) ;wifi.key=new key ## Samba share system.samba.enabled=1 ### Virtual Gamepads system.virtual-gamepads.enabled=1 ### SSH system.ssh.enabled=1   # ------------ C - Audio ------------ # ## Set the audio device (auto, hdmi, jack) audio.device=auto ## Set system volume (0..100) audio.volume=90 ## Enable or disable system sounds in ES (0,1) audio.bgmusic=1       # -------------- D - Controllers ----------------- # # Enable support for standard bluetooth controllers controllers.bluetooth.enabled=1     ## Please enable only one of these # -------------- D1 - PS3 Controllers ------------ # ##Enable PS3 controllers support controllers.ps3.enabled=1 ## Choose an driver beetween official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia) controllers.ps3.driver=official     # ------------ D2 - XBOX Controllers ------------ # ## Xbox controllers are already supported, but xboxdrv can solve some compatibility issues ## Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1) controllers.xboxdrv.enabled=0 ## Set the amount of controllers to use with xboxdrv (0..4) controllers.xboxdrv.nbcontrols=2     # ------------ D3 - GPIO Controllers ------------ # ## GPIO Controllers ## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1) controllers.gpio.enabled=0 ## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2) controllers.gpio.args=map=1,2     ## DB9 Controllers ## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1) controllers.db9.enabled=0 ## db9 arguments controllers.db9.args=map=1   ## Gamecon controllers ## Enable gamecon controllers, for nes, snes psx (0,1) controllers.gamecon.enabled=0 ## gamecon_args controllers.gamecon.args=map=1   ## XGaming's XArcade Tankstik and other compatible devices controllers.xarcade.enabled=0       # ------------ F - Language and keyboard ------------ # ## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN) system.language=fr_FR ## set the keyboard layout (fr,en,de,us,es) ;system.kblayout=fr ## Set you local time ## Select your timezone from : ls /usr/share/zoneinfo/ (string) ;system.timezone=Europe/Paris       # ------------ G - UPDATES ------------ # ## Automatically check for updates at start (0,1) updates.enabled=1 # default : stable ; set to beta to get the next version currently beeing tested. set to unstable at your own risk to get the developpment version. updates.type=stable     # ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ # ## The global value will be used for all emulators, exept if the value ## is redifined in the emulator   ## Set game resolution for emulators ## select your mode from the command : tvservice -m [MODE] ## CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced ## CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive ## use 'default' for using the default resolution ## (string) ;global.videomode=CEA 4 HDMI global.videomode=DMT 35 HDMI   ## Shader set ## Automatically select shaders for all systems ## (none, retro, scanlines) global.shaderset=none   ## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string) global.shaders=   ## Set ratio for all emulators (auto,4/3,16/9,16/10,custom) global.ratio=4/3   ## Set smooth for all emulators (0,1) global.smooth=1   ## Set rewind for all emulators (0,1) global.rewind=1   ## Set autosave/load savestate for all emulators (0,1) global.autosave=0   ## Enable retroarchievements (0,1) ## Set your www.retroachievements.org username/password global.retroachievements=0 global.retroachievements.username= global.retroachievements.password=   ## Set retroarch input driver (auto, udev, sdl2) ## If you don't have issues with your controllers, let auto global.inputdriver=auto   ## If you do not want recalboxOS to generate the configuration for all emulators (string) ;global.configfile=/path/to/my/configfile.cfg   # ------------ I - EMULATORS CHOICES ----------- # ## You can override the global configuration here ## Here is the snes example ;snes.videomode=CEA 4 HDMI snes.core=snes9x_next ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp ;snes.ratio=16/9 ;snes.smooth=0 ;snes.rewind=1 ;snes.autosave=0 ;snes.emulator=libretro ## If you do not want recalboxOS to generate the configuration for the emulator : ;snes.configfile=/path/to/my/configfile.cfg   ## Default cores for RPi2 snes.core=snes9x_next gba.core=mgba mame.core=mame078 nes.core=fceunext   ## The rewind option is deactivated by default on these unsupported cores (don't edit please) virtualboy.rewind=0 sega32x.rewind=0 segacd.rewind=0 psx.rewind=0 fbalibretro.rewind=0 vectrex.rewind=0   ## NeoGeo emulator ## You can use pifba or a libretro core (fba2x,libretro) neogeo.emulator=libretro ## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all) neogeo.core=fba   ## N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution) ## So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI). ## If your screen is not compatible with one of these video modes, please check the recalbox's wiki. n64.videomode=DMT 4 HDMI ## If you are using a CRT screen, please change the setting above with this one : # n64.videomode=default