Permanent loss of video signal version 8.1 Electron
-
After recording recalbox 8.1 Electron to a 64 gb sd card, a problem appeared: periodic loss of the video signal for several seconds (approximately every 10 seconds). The SD card is working (checked several times). Raspberry Type 3b+
-
@frenzy1995 Can you test a clean install, with the latest official version, on a 16gb class 10 microSD card?
If that doesn't change the result, try another TV, then another HDMI cable, and see if there are any changes.
-
Same issue here.... RPi3B, SD 64GB. Occurs mostly on the emulationstation interface and with SNES emulation.
-
Can you test a clean install, with the latest official version, on a 16gb class 10 microSD card?
If that doesn't change the result, try another TV, then another HDMI cable, and see if there are any changes.
-
@zing Tried with a clean install of 8.1.1 and had the same issues.
But one thing that call my attention was I have some "under voltage" warnings (I have the NesPi case with a official power adapter from Rpi) that on previous releases were noticed when I turn off the system, but in this release I think the loss of signal maybe are correlated with this alerts. -
@peyo
I can confirm that a low power supply creates cuts in the video signal. I had the case with a Pi3 + superpicase. By changing the power supply the problem was solved.