Bon pas de solution ? Je vais me débrouiller voir si ça fonctionne avec un autre game pad USB d'une autre marque du coup
Latest posts made by zisquier
-
RE: Problème de config personnalisé avec gamepas usb
-
RE: Problème de config personnalisé avec gamepas usb
@zisquier Bon j'ai vu que le fichier avait été téléchargé ... mais du coup je sais pas quoi faire moi maintenant
-
RE: faire son stick arcade sans passer par gpio
Moi j'ai mis mes 2 stick Arcade en USB via une petite interface qui n'occupe qu'un seul port de ma RPI2
-
RE: Problème de config personnalisé avec gamepas usb
Bah j'ai localiser le fichier config.txt ... très bien ... j'en fait quoi ?
j'ai passer une commande dans cyberduck : mount -o remount,rw /boot ... ça n'y fait rien
Bon pas grave y'a une autre commande d'écrite dans une autre partie, qui enregistre une archive dans recalbox/saves ... j'imagine que c'est ça ?
Pas super clair j'ai eu du mal à comprendre le tuto, mais bon en cherchant je crois que c'est ça : recalbox-support-20170903204550.tar.gz -
RE: Problème de config personnalisé avec gamepas usb
au risque de me faire encore engueuler ....
#!/bin/bash
if [ ! "$1" ];then
echo -e "usage : recalbox-config.sh [command] [args]\nWith command in\n\toverscan [enable|disable]\n\toverclock [none|high|turbo|extrem]\n\taudio [hdmi|jack|auto]\n\tcanupdate\n\tupdate\n\twifi [enable|disable] ssid key\n\tstorage [current|list|INTERNAL|ANYEXTERNAL|RAM|DEV UUID]"
exit 1
fi
configFile="/boot/config.txt"
command="$1"
mode="$2"
extra1="$3"
extra2="$4"
arch=cat /recalbox/recalbox.arch
recalboxupdateurl="http://archive.recalbox.com/updates/v1.0"
preBootConfig() {
mount -o remount,rw /boot
}postBootConfig() {
mount -o remount,ro /boot
}waitWifi() {
DEVICE=$1
TIMEOUT=$2N=0
while test $N -lt $TIMEOUT
do
wpa_cli -i"$DEVICE" status | grep -qE '^wpa_state=COMPLETED$' && return 0
sleep 1
let N++
done
echo "logtime
: wifi timeout" >> $log
return 1
}rb_wpa_supplicant() {
wlan=$1
TRY1T=$(date +%s)# default driver (nl80211) if /usr/sbin/wpa_supplicant -i$wlan -c/var/lib/wpa_supplicant.conf then return fi # try an other driver in case it failed in the following seconds TRY2T=$(date +%s) let TRYDELTA=$TRY2T-$TRY1T if test $TRYDELTA -lt 5 then # test an other driver in case the hardware is not migrated to the new driver if /usr/sbin/wpa_supplicant -i$wlan -D wext -c/var/lib/wpa_supplicant.conf then return fi fi
}
log=/recalbox/share/system/logs/recalbox.log
wpafile=/var/lib/wpa_supplicant.conf
systemsetting="python /usr/lib/python2.7/site-packages/configgen/settings/recalboxSettings.pyc"echo "---- recalbox-config.sh ----" >> $log
if [ "$command" == "overscan" ]; then
if [ -f "$configFile" ];then
preBootConfig
cat "$configFile" | grep "disable_overscan"
overscanPresent=$?if [ "$overscanPresent" != "0" ];then echo "disable_overscan=1" >> "$configFile" fi cat "$configFile" | grep "overscan_scale" overscanScalePresent=$? if [ "$overscanScalePresent" != "0" ];then echo "overscan_scale=1" >> "$configFile" fi if [ "$mode" == "enable" ];then echo "`logtime` : enabling overscan" >> $log sed -i "s/#\?disable_overscan=.*/disable_overscan=0/g" "$configFile" sed -i "s/#\?overscan_scale=.*/overscan_scale=1/g" "$configFile" elif [ "$mode" == "disable" ];then echo "`logtime` : disabling overscan" >> $log sed -i "s/#\?disable_overscan=.*/disable_overscan=1/g" "$configFile" sed -i "s/#\?overscan_scale=.*/overscan_scale=0/g" "$configFile" else postBootConfig exit 1 fi postBootConfig exit 0
else
exit 2
fi
fiif [ "$command" == "overclock" ]; then
declare -A arm_freq
arm_freq["rpi2-extrem"]=1100
arm_freq["rpi2-turbo"]=1050
arm_freq["rpi2-high"]=1050
arm_freq["extrem"]=1100
arm_freq["turbo"]=1000
arm_freq["high"]=950
arm_freq["none"]=700
arm_freq["none-rpi2"]=900declare -A core_freq
core_freq["rpi2-extrem"]=550
core_freq["rpi2-turbo"]=525
core_freq["rpi2-high"]=525
core_freq["extrem"]=550
core_freq["turbo"]=500
core_freq["high"]=250
core_freq["none"]=250
core_freq["none-rpi2"]=250declare -A sdram_freq
sdram_freq["rpi2-extrem"]=480
sdram_freq["rpi2-turbo"]=480
sdram_freq["rpi2-high"]=450
sdram_freq["extrem"]=600
sdram_freq["turbo"]=600
sdram_freq["high"]=450
sdram_freq["none"]=400
sdram_freq["none-rpi2"]=450declare -A force_turbo
force_turbo["rpi2-extrem"]=1
force_turbo["rpi2-turbo"]=0
force_turbo["rpi2-high"]=0
force_turbo["extrem"]=1
force_turbo["turbo"]=0
force_turbo["high"]=0
force_turbo["none"]=0
force_turbo["none-rpi2"]=0declare -A over_voltage
over_voltage["rpi2-extrem"]=4
over_voltage["rpi2-turbo"]=4
over_voltage["rpi2-high"]=4
over_voltage["extrem"]=8
over_voltage["turbo"]=6
over_voltage["high"]=6
over_voltage["none"]=0
over_voltage["none-rpi2"]=0declare -A over_voltage_sdram
over_voltage_sdram["rpi2-extrem"]=4
over_voltage_sdram["rpi2-turbo"]=2
over_voltage_sdram["rpi2-high"]=2
over_voltage_sdram["extrem"]=6
over_voltage_sdram["turbo"]=0
over_voltage_sdram["high"]=0
over_voltage_sdram["none"]=0
over_voltage_sdram["none-rpi2"]=0declare -A gpu_freq
gpu_freq["rpi2-extrem"]=366
gpu_freq["rpi2-turbo"]=350
gpu_freq["rpi2-high"]=350
gpu_freq["extrem"]=250
gpu_freq["turbo"]=250
gpu_freq["high"]=250
gpu_freq["none"]=250
gpu_freq["none-rpi2"]=250if [ -f "$configFile" ];then
preBootConfig
if [[ "$mode" == "none" ]]; then
for entry in arm_freq core_freq sdram_freq force_turbo over_voltage over_voltage_sdram gpu_freq; do
sed -i "/^${entry}/d" "$configFile"
done
else
cat "$configFile" | grep "arm_freq"
if [ "$?" != "0" ];then
echo "arm_freq=" >> "$configFile"
fi
cat "$configFile" | grep "core_freq"
if [ "$?" != "0" ];then
echo "core_freq=" >> "$configFile"
fi
cat "$configFile" | grep "sdram_freq"
if [ "$?" != "0" ];then
echo "sdram_freq=" >> "$configFile"
fi
cat "$configFile" | grep "force_turbo"
if [ "$?" != "0" ];then
echo "force_turbo=" >> "$configFile"
fi
cat "$configFile" | grep "over_voltage"
if [ "$?" != "0" ];then
echo "over_voltage=" >> "$configFile"
fi
cat "$configFile" | grep "over_voltage_sdram"
if [ "$?" != "0" ];then
echo "over_voltage_sdram=" >> "$configFile"
fi
cat "$configFile" | grep "gpu_freq"
if [ "$?" != "0" ];then
echo "gpu_freq=" >> "$configFile"
fised -i "s/#\?arm_freq=.*/arm_freq=${arm_freq[$mode]}/g" "$configFile" sed -i "s/#\?core_freq=.*/core_freq=${core_freq[$mode]}/g" "$configFile" sed -i "s/#\?sdram_freq=.*/sdram_freq=${sdram_freq[$mode]}/g" "$configFile" sed -i "s/#\?force_turbo=.*/force_turbo=${force_turbo[$mode]}/g" "$configFile" sed -i "s/#\?over_voltage=.*/over_voltage=${over_voltage[$mode]}/g" "$configFile" sed -i "s/#\?over_voltage_sdram=.*/over_voltage_sdram=${over_voltage_sdram[$mode]}/g" "$configFile" sed -i "s/#\?gpu_freq=.*/gpu_freq=${gpu_freq[$mode]}/g" "$configFile" fi echo "`logtime` : enabled overclock mode : $mode" >> $log postBootConfig exit 0
else
exit 2
fifi
if [ "$command" == "audio" ];then
cmdVal="0"
if [ "$mode" == "hdmi" ];then
cmdVal="2"
elif [ "$mode" == "jack" ];then
cmdVal="1"
fi
echo "logtime
: setting audio output mode : $mode" >> $log
amixer cset numid=3 $cmdVal || exit 1
exit 0
fiif [ "$command" == "volume" ];then
if [ "$mode" != "" ];then
echo "logtime
: setting audio volume : $mode" >> $log
amixer set PCM -- ${mode}% || exit 1
exit 0
fi
exit 12
fiif [ "$command" == "gpiocontrollers" ];then
command="module"
mode="load"
extra1="mk_arcade_joystick_rpi"
extra2="map=1,2"
fiif [ "$command" == "module" ];then
modulename="$extra1"
map="$extra2"
# remove in all cases
rmmod /lib/modules/uname -r
/extra/${modulename}.ko >> $logif [ "$mode" == "load" ];then echo "`logtime` : loading module $modulename args = $map" >> $log insmod /lib/modules/`uname -r`/extra/${modulename}.ko $map >> $log [ "$?" ] || exit 1 fi exit 0
fi
if [ "$command" == "canupdate" ];then
updatetype="$systemsetting -command load -key updates.type
"
if test "${updatetype}" = "beta"
then
updatetype="stable"
fi
available=wget -qO- ${recalboxupdateurl}/${updatetype}/${arch}/recalbox.version
if [[ "$?" != "0" ]];then
exit 2
fi
installed=cat /recalbox/recalbox.version
if [[ "$available" != "$installed" ]]; then
echo "update available"
exit 0
fi
echo "no update available"
exit 12
fiif [ "$command" == "update" ];then
/recalbox/scripts/recalbox-upgrade.sh
exit $?
fiif [[ "$command" == "ethernet" ]]; then
eth="ethifconfig -a | sed -n \"s/eth\(.\).*/\1/p\"
"
if [[ "$?" != "0" || "$eth" == "eth" ]];then
echo "logtime
: no eth interface found" >> $log
exit 1
else
echo "logtime
: $eth will be used as wired interface"
fi
sed -i "s/eth[0-9]+/$eth/g" /var/network/interfaces # directly modify the file and not the link because sed create a temporary file in the same directory
if [[ "$mode" == "start" ]]; then
/sbin/ifdown $eth >> $log
/sbin/ifup $eth >> $log
exit $?
elif [[ "$mode" == "stop" ]]; then
/sbin/ifdown $eth >> $log
exit $?
fifi
if [[ "$command" == "wifi" ]]; then
if [[ ! -f "$wpafile" ]];then
echo "logtime
: $wpafile do not exists" >> $log
exit 1
fi
ssid="$3"
psk="$4"wlan="wlan`ifconfig -a | sed -n \"s/wlan\(.\).*/\1/p\"`" if [[ "$?" != "0" || "$wlan" == "wlan" ]] ;then echo "`logtime` : no wlan interface found" >> $log exit 1 else echo "`logtime` : $wlan be used as wifi interface" >> $log fi sed -i "s/wlan[0-9]\+/$wlan/g" /var/network/interfaces # directly modify the file and not the link because sed create a temporary file in the same directory if [[ "$mode" == "enable" ]]; then echo "`logtime` : enabling wifi" >> $log cat $wpafile | grep network >> $log if [ "$?" != "0" ]; then echo "`logtime` : creating network entry in $wpafile" >> $log echo -e "network={\n\tssid=\"\"\n\tpsk=\"\"\n}" >> $wpafile fi sed -i "s/ssid=\".*\"/ssid=\"`echo $ssid | sed -e 's/[\/&]/\\\\&/g'`\"/g" $wpafile sed -i "s/psk=\".*\"/psk=\"`echo $psk | sed -e 's/[\/&]/\\\\&/g'`\"/g" $wpafile mode="forcestart" fi if [[ "$mode" == "disable" ]]; then sed -i "s/ssid=\".*\"/ssid=\"\"/g" $wpafile sed -i "s/psk=\".*\"/psk=\"\"/g" $wpafile ifdown $wlan exit $? fi if [[ "$mode" =~ "start" ]]; then if [[ "$mode" != "forcestart" ]]; then settingsWlan="`$systemsetting -command load -key wifi.enabled`" if [ "$settingsWlan" != "1" ];then exit 1 fi fi echo "`logtime` : starting wifi" >> $log killall wpa_supplicant >> $log /sbin/ifdown $wlan >> $log rb_wpa_supplicant "$wlan" & waitWifi $wlan 20 /sbin/ifup $wlan >> $log ifconfig $wlan | grep "inet addr" >> $log exit $? fi
fi
if [[ "$command" == "hcitoolscan" ]]; then
killall hidd >> /dev/null
killall hcitool >> /dev/null
hcitool scan | tail -n +2
exit 0
fiif [[ "$command" == "hiddpair" ]]; then
name="$extra1"
mac1="$mode"
mac=echo $mac1 | grep -oEi "([0-9A-F]{2}[:-]){5}([0-9A-F]{2})" | tr '[:upper:]' '[:lower:]'
if [ "$?" != "0" ]; then
exit 1
fi
echo "pairing $name $mac" >> $log
echo $name | grep "8Bitdo|other" >> $log
if [ "$?" == "0" ]; then
echo "8Bitdo detected" >> $log
cat "/run/udev/rules.d/99-8bitdo.rules" | grep "$mac" >> /dev/null
if [ "$?" != "0" ]; then
echo "adding rule for $mac" >> $log
echo "SUBSYSTEM=="input", ATTRS{uniq}=="$mac", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"" >> "/run/udev/rules.d/99-8bitdo.rules"
fi
fi
hidd --connect $mac
connected=$?
deviceFile=/var/lib/bluetooth/known_devices
if [ $connected ]; then
cat $deviceFile | grep $mac1
if [[ $? == "0" ]]; then
echo "bluetooth : $mac1 already in $deviceFile" >> $log
else
echo "bluetooth : adding $mac1 in $deviceFile" >> $log
echo "$mac1" >> "$deviceFile"
fi# backup files on the share directory rm -rf /recalbox/share/system/bluetooth if mkdir -p /recalbox/share/system/bluetooth then ls /var/lib/bluetooth | while read X do UX=$(echo "${X}" | sed -e s+":"+"@"+g) cp -r "/var/lib/bluetooth/${X}" "/recalbox/share/system/bluetooth/${UX}" done fi fi exit $connected
fi
storageFile="/boot/recalbox-boot.conf"
if [[ "$command" == "storage" ]]; then
if [[ "$mode" == "current" ]]; then
if test -e $storageFile
then
SHAREDEVICE=cat ${storageFile} | grep "sharedevice=" | head -n1 | cut -d'=' -f2
[[ "$?" -ne "0" || "$SHAREDEVICE" == "" ]] && SHAREDEVICE=INTERNAL
echo "$SHAREDEVICE"
else
echo "INTERNAL"
fi
exit 0
fi
if [[ "$mode" == "list" ]]; then
echo "INTERNAL"
echo "ANYEXTERNAL"
echo "RAM"
(blkid | grep -vE '^/dev/mmcblk' | grep ': LABEL="'
blkid | grep -vE '^/dev/mmcblk' | grep -v ': LABEL="' | sed -e s+':'+': LABEL="NO_NAME"'+
) | sed -e s+'^[^:]: LABEL="([^"])" UUID="([^"])" TYPE="[^"]"$'+'DEV \2 \1'+
exit 0
fi
if [[ "${mode}" == "INTERNAL" || "${mode}" == "ANYEXTERNAL" || "${mode}" == "RAM" || "${mode}" == "DEV" ]]; then
preBootConfig
if [[ "${mode}" == "INTERNAL" || "${mode}" == "ANYEXTERNAL" || "${mode}" == "RAM" ]]; then
if grep -qE "^sharedevice=" "${storageFile}"
then
sed -i "s|sharedevice=.|sharedevice=${mode}|g" "${storageFile}"
else
echo "sharedevice=${mode}" >> "${storageFile}"
fi
fi
if [[ "${mode}" == "DEV" ]]; then
if grep -qE "^sharedevice=" "${storageFile}"
then
sed -i "s|sharedevice=.|sharedevice=${mode} $extra1|g" "${storageFile}"
else
echo "sharedevice=${mode} ${extra1}" >> "${storageFile}"
fi
fi
postBootConfig
exit 0
fi
fiif [[ "$command" == "forgetBT" ]]; then
killall -9 hidd
killall -9 hcitool
rm -rf /var/lib/bluetooth/*
exit 0
fiexit 10
-
RE: Problème de config personnalisé avec gamepas usb
J'ai donc bien mon fichier recalbox-support.sh
je le post/envoie où et à qui ? -
RE: Problème de config personnalisé avec gamepas usb
@acris Ok je vais faire ça merci je suis sous OSX donc pas de WinSCP, le temps de chopper cyberduck comme indiqué
-
RE: Problème de config personnalisé avec gamepas usb
@acris Oui c'est ce que j'ai fait (entres autres histoire de tester différentes combinaisons) mais je me demande si les gamepad usb sont tous compatible où y'a t-il certain constructeurs qui feraient exception ?
-
RE: Configuration Manette sur chaque emulateur ?
@acris Je squatte rien du tout j'ai apporté mon aide à x_kent me semble t il ! Je vais pas recréer un topic quasi identique pour qu'on vienne me dire qu'il y en a un autre similaire ...
-
Problème de config personnalisé avec gamepas usb
Voilà passons à mon soucis maintenant :
Je me suis bien approprié la config personnalisé de chaque émulateur, obligeant même les gamins ajouer avec les stick arcade pour les jeux d'arcade et les gamepad usb pour les jeux console ... ça fonctionne bien
SAUF QUE ... en voulant rajouter un deuxème gamepad USB pour les consoles, mon premier étant reconnu et bien fonctionnel (Thrustmaster) pour le player 1.
J'ai configuré dans ES un 2eme gamepad (celui là exactement Konix
Bien qu'il soit bien configuré dans ES, impossible de l'afficher dans retroarch, il me propose soit la Thrustmaster (qui ets mon player 1) soit la THT stick arcade (ce que je ne veut pas) et il ne veut pas de mon game pad konix.Quelqu'un a-t-il une astuce pour ce petit problème, car c'est quand même plus sympa de jouer a Nightmare Busters à 2
Merci