Posts made by pasdozer

@woomack telecharge ce logiciel HDDLLF.4.40 pour recuper l espace mort sur ta SD

Tu aurai pas ta nappe de ton ecran Raspberry qui aurai bougée?
C est assez sensible comme montage.

Extrait du wiki Waveshare :

Note: If you are using recalbox 7.0.1-Reloaded version image, the configuration code of config.txt needs to be as follows, add the following code at the end of config.txt, save and eject the TF card safely.

hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 600 60 6 0 0 0
hdmi_drive=2
display_rotate=0
avoid_warnings=1

Note: If you are using the recalbox 7.0.1-Reloaded version image, you need to enter the following commands in the terminal to configure the gamepad

mount -o remount,rw /
mount -o remount,rw /boot

Edit the recalbox.conf file

nano /recalbox/share/system/recalbox.conf

Modify the line controllers.gpio.enabled=0 in the file to

controllers.gpio.enabled=1

After modification, save the file and exit the editing. After entering reboot to restart the system, you can use the buttons normally.

@lulumix tu enregistres avec quel logiciel (notpad ++ou autre) ?