Posts made by Nelzebym

En faisant de nouvelles recherche j'ai vu que c'était quelque chose de commun sur les jeux de la master system, mais j'ai aussi vu que Libretro GenesisPlusGX propose une option liée à l'overscan qui sans régler le problème permet de le rendre moins gênant (certainement une question de goûts).
Du coup je pense que pour les autres systèmes il s'agit juste de trouver le bon réglage de scaling

Par contre en ce qui concerne la master system ça m'amène à un nouveau problème, celui de la sauvegarde sous picodrive que je n'arrive pas à récupérer sous GenesisPlusGX, est-ce qu'il y a une quelconque manière de la récupérer via une commande, un logiciel ou une option via recalbox que je n'aurais pas encore trouvé ?

Bonjour,

Je rencontre un problème d'affichage avec beaucoup de roms (peu importe le système) qui se remarque bien avec les overlays (j'ai testé sans overlay en plein écran et ça fait de même).
Il s'agit de bandes sur les côtés.

J'ai fait des captures sur un jeu en testant trois émulateurs/cores différents afin d'illustrer :

Libretro Picodrive :

Libretro GenesisPlusGX :

Libretro Gearsystem :

Comme on peut le voir la bande ne se trouve pas toujours au même moment du jeu, elle change parfois de couleur.
J'ai l'impression que je ne rencontre pas ce problème sur les consoles portables (seul un simple réglage dans "Scaling" a été suffisant jusque là).

Si vous avez des idées je suis prêt à essayer car il faut reconnaître que ça ne fait pas joli !

J'oubliais le plus important, merci à tous pour votre aide

Dans les derniers tutos sur youtube de la chaine officielle ça parle encore de balena etcher, mais en effet je suis passé complètement à côté de l'information sur le site !

Bonsoir @Beho , @davidb2111 ,

J'ai le plaisir de vous annoncer avoir fini par trouver une solution, j'ai tout d'abord tenté de lancer le système sur plusieurs pc avec IGP de la gamme Ryzen (je n'ai pas encore essayé sur mon athlon AM4) ou GPU dédié RX 5XX et le constat était le même.

J'ai tenté plusieurs flashs différents sur plusieurs support, sans succès.
J'ai ensuite mis à jour le système sur chacune des versions correctives mais sans succès non plus.

Enfin j'ai tenté d'abandonner balena etcher au profit de raspberry pi imager et là plus de problème avec mes machines AMD !

Victoire ! [Imaginez une fanfare de Final Fantasy ici]

J'ai dû le faire en quatre parties car il y avait trop de caractères pour un seul message !

[    3.040805] [drm] Detected VRAM RAM=8192M, BAR=256M
[    3.040808] [drm] RAM width 256bits GDDR5
[    3.042037] [TTM] Zone  kernel: Available graphics memory: 8194952 KiB
[    3.042041] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    3.042044] [TTM] Initializing pool allocator
[    3.042048] [TTM] Initializing DMA pool allocator
[    3.042083] [drm] amdgpu: 8192M of VRAM memory ready
[    3.042087] [drm] amdgpu: 8192M of GTT memory ready.
[    3.042097] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    3.042480] kvm: Nested Virtualization enabled
[    3.042487] kvm: Nested Paging enabled
[    3.042488] SVM: Virtual VMLOAD VMSAVE supported
[    3.042489] SVM: Virtual GIF supported
[    3.043717] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
[    3.044717] [drm] Chained IB support enabled!
[    3.046867] amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
[    3.048813] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    3.049785] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    3.053960] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line                                                                                                                                                             _outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.053965] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0                                                                                                                                                             /0x0/0x0)
[    3.053968] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0                                                                                                                                                             /0x0)
[    3.053971] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    3.053973] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x11/0x0
[    3.053975] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    3.053977] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    3.053979] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    3.053981] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    3.054970] MCE: In-kernel MCE decoding enabled.
[    3.056888] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.056891] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.056891]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.056891]  (Note that use of the override may cause unknown side effects.)
[    3.095258] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:                                                                                                                                                             08.1/0000:0a:00.3/sound/card1/input9
[    3.095297] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:0                                                                                                                                                             8.1/0000:0a:00.3/sound/card1/input10
[    3.095329] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/                                                                                                                                                             0000:0a:00.3/sound/card1/input11
[    3.095395] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:0                                                                                                                                                             8.1/0000:0a:00.3/sound/card1/input12
[    3.095398] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.095399] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.095399]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.095399]  (Note that use of the override may cause unknown side effects.)
[    3.095427] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/00                                                                                                                                                             00:00:08.1/0000:0a:00.3/sound/card1/input13
[    3.099446] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it'                                                                                                                                                             s not patched
[    3.099452] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it'                                                                                                                                                             s not patched
[    3.099455] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it'                                                                                                                                                             s not patched
[    3.099458] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it'                                                                                                                                                             s not patched
[    3.099461] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it'                                                                                                                                                             s not patched
[    3.099464] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it'                                                                                                                                                             s not patched
[    3.099467] amdgpu: [powerplay] Voltage value looks like a Leakage ID but it'                                                                                                                                                             s not patched
[    3.109379] [drm] DM_PPLIB: values for Engine clock
[    3.109382] [drm] DM_PPLIB:   300000
[    3.109384] [drm] DM_PPLIB:   466000
[    3.109385] [drm] DM_PPLIB:   751000
[    3.109386] [drm] DM_PPLIB:   1019000
[    3.109387] [drm] DM_PPLIB:   1074000
[    3.109389] [drm] DM_PPLIB:   1118000
[    3.109390] [drm] DM_PPLIB:   1119000
[    3.109391] [drm] DM_PPLIB:   1120000
[    3.109392] [drm] DM_PPLIB: Validation clocks:
[    3.109394] [drm] DM_PPLIB:    engine_max_clock: 112000
[    3.109395] [drm] DM_PPLIB:    memory_max_clock: 210000
[    3.109396] [drm] DM_PPLIB:    level           : 8
[    3.109398] [drm] DM_PPLIB: values for Memory clock
[    3.109400] [drm] DM_PPLIB:   300000
[    3.109401] [drm] DM_PPLIB:   2100000
[    3.109402] [drm] DM_PPLIB: Validation clocks:
[    3.109403] [drm] DM_PPLIB:    engine_max_clock: 112000
[    3.109405] [drm] DM_PPLIB:    memory_max_clock: 210000
[    3.109406] [drm] DM_PPLIB:    level           : 8
[    3.120677] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.120681] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.120681]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.120681]  (Note that use of the override may cause unknown side effects.)
[    3.121060] [drm] Display Core initialized with v3.2.48!
[    3.121175] snd_hda_intel 0000:08:00.1: bound 0000:08:00.0 (ops amdgpu_dm_aud                                                                                                                                                             io_component_bind_ops [amdgpu])
[    3.146706] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.146710] [drm] Driver supports precise vblank timestamp query.
[    3.152429] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.152434] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.152434]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.152434]  (Note that use of the override may cause unknown side effects.)
[    3.173492] [drm] UVD and UVD ENC initialized successfully.
[    3.176437] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.176440] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.176440]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.176440]  (Note that use of the override may cause unknown side effects.)
[    3.199029] usb 3-3: new full-speed USB device number 4 using xhci_hcd
[    3.205515] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.205518] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.205518]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.205518]  (Note that use of the override may cause unknown side effects.)
[    3.228877] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.228880] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.228880]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.228880]  (Note that use of the override may cause unknown side effects.)
[    3.264435] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.264438] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.264438]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.264438]  (Note that use of the override may cause unknown side effects.)
[    3.274488] [drm] VCE initialized successfully.
[    3.275170] kfd kfd: Allocated 3969056 bytes on gart
[    3.275514] Virtual CRAT table created for GPU
[    3.275516] Parsing CRAT table with 1 nodes
[    3.275521] Creating topology SYSFS entries
[    3.275568] Topology: Add dGPU node [0x67df:0x1002]
[    3.275571] kfd kfd: added device 1002:67df
[    3.280815] [drm] fb mappable at 0xE0830000
[    3.280818] [drm] vram apper at 0xE0000000
[    3.280820] [drm] size 33177600
[    3.280821] [drm] fb depth is 24
[    3.280823] [drm]    pitch is 15360
[    3.280882] fbcon: amdgpudrmfb (fb0) is primary device
[    3.293513] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.293514] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.293514]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.293514]  (Note that use of the override may cause unknown side effects.)
[    3.308689] Console: switching to colour frame buffer device 480x135
[    3.332473] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.332475] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.332475]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.332475]  (Note that use of the override may cause unknown side effects.)
[    3.332854] amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
[    3.340593] [drm] Initialized amdgpu 3.35.0 20150101 for 0000:08:00.0 on mino                                                                                                                                                             r 0
[    3.349815] usb 3-3: New USB device found, idVendor=045e, idProduct=02ea, bcd                                                                                                                                                             Device= 3.01
[    3.349843] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.349863] usb 3-3: Product: Controller
[    3.349876] usb 3-3: Manufacturer: Microsoft
[    3.349889] usb 3-3: SerialNumber: 3033363030333236383332363430
[    3.359794] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.359822] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.359822]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.359822]  (Note that use of the override may cause unknown side effects.)
[    3.395344] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.395363] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                                                                                                                                                              will not load.
[    3.395363]  Either enable ECC checking or force module loading by setting 'e                                                                                                                                                             cc_enable_override'.
[    3.395363]  (Note that use of the override may cause unknown side effects.)
[    3.486141] usb 3-4: new low-speed USB device number 5 using xhci_hcd
[    3.541241] scsi 9:0:0:0: Direct-Access     WD       Game Drive       5006 PQ                                                                                                                                                             : 0 ANSI: 6
[    3.541475] sd 9:0:0:0: Attached scsi generic sg2 type 0
[    3.541639] sd 9:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16                                                                                                                                                             ).
[    3.541765] sd 9:0:0:0: [sdc] 23437770752 512-byte logical blocks: (12.0 TB/1                                                                                                                                                             0.9 TiB)
[    3.541783] sd 9:0:0:0: [sdc] 4096-byte physical blocks
[    3.542679] sd 9:0:0:0: [sdc] Write Protect is off
[    3.542692] sd 9:0:0:0: [sdc] Mode Sense: 47 00 10 08
[    3.543428] sd 9:0:0:0: [sdc] No Caching mode page found
[    3.543441] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[    3.576637]  sdc: sdc1
[    3.579192] sd 9:0:0:0: [sdc] Attached SCSI disk
[    3.632883] usb 3-4: New USB device found, idVendor=0e8f, idProduct=2517, bcd                                                                                                                                                             Device= 1.00
[    3.632910] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.672870] hidraw: raw HID events driver (C) Jiri Kosina
[    3.674858] input: Microsoft X-Box One S pad as /devices/pci0000:00/0000:00:0                                                                                                                                                             7.1/0000:09:00.3/usb3/3-3/3-3:1.0/input/input14
[    3.675018] usbcore: registered new interface driver xpad
[    3.683789] Bluetooth: Core ver 2.22
[    3.683821] NET: Registered protocol family 31
[    3.683834] Bluetooth: HCI device and connection manager initialized
[    3.683853] Bluetooth: HCI socket layer initialized
[    3.683868] Bluetooth: L2CAP socket layer initialized
[    3.683883] Bluetooth: SCO socket layer initialized
[    3.689348] usbcore: registered new interface driver btusb
[    3.706994] usbcore: registered new interface driver usbhid
[    3.707024] usbhid: USB HID core driver
[    3.709083] input: HID 0e8f:2517 as /devices/pci0000:00/0000:00:07.1/0000:09:                                                                                                                                                             00.3/usb3/3-4/3-4:1.0/0003:0E8F:2517.0001/input/input15
[    3.761269] hid-generic 0003:0E8F:2517.0001: input,hidraw0: USB HID v1.10 Key                                                                                                                                                             board [HID 0e8f:2517] on usb-0000:09:00.3-4/input0
[    3.761469] input: HID 0e8f:2517 Consumer Control as /devices/pci0000:00/0000                                                                                                                                                             :00:07.1/0000:09:00.3/usb3/3-4/3-4:1.1/0003:0E8F:2517.0002/input/input16
[    3.813220] input: HID 0e8f:2517 as /devices/pci0000:00/0000:00:07.1/0000:09:                                                                                                                                                             00.3/usb3/3-4/3-4:1.1/0003:0E8F:2517.0002/input/input17
[    3.813292] input: HID 0e8f:2517 Mouse as /devices/pci0000:00/0000:00:07.1/00                                                                                                                                                             00:09:00.3/usb3/3-4/3-4:1.1/0003:0E8F:2517.0002/input/input18
[    3.813363] hid-generic 0003:0E8F:2517.0002: input,hidraw1: USB HID v1.10 Mou                                                                                                                                                             se [HID 0e8f:2517] on usb-0000:09:00.3-4/input1
[    3.816503] mousedev: PS/2 mouse device common for all mice
[    4.461658] 8021q: 802.1Q VLAN Support v1.8
[    4.480896] cfg80211: Loading compiled-in X.509 certificates for regulatory d                                                                                                                                                             atabase
[    4.482294] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.494069] Generic FE-GE Realtek PHY r8169-700:00: attached PHY driver [Gene                                                                                                                                                             ric FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE)
[    4.584221] r8169 0000:07:00.0 eth0: Link is Down
[    5.169362] snd_hda_intel 0000:08:00.1: IRQ timing workaround is activated fo                                                                                                                                                             r card #0. Suggest a bigger bdl_pos_adj.
[    6.783574] squashfs: Unknown parameter 'fmask'
[    6.783787] FAT-fs (sda2): utf8 is not a recommended IO cha**et for FAT files                                                                                                                                                             ystems, filesystem will be case sensitive!
[    6.786785] FAT-fs (sda2): Volume was not properly unmounted. Some data may b                                                                                                                                                             e corrupt. Please run fsck.
[    7.362203] squashfs: Unknown parameter 'fmask'
[    7.362627] fuseblk: Unknown parameter 'fmask'
[    7.808785] r8169 0000:07:00.0 eth0: Link is Up - 1Gbps/Full - flow control r                                                                                                                                                             x/tx
[    8.430860] NET: Registered protocol family 10
[    8.431187] Segment Routing with IPv6
[   10.627364] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.627366] Bluetooth: BNEP filters: protocol multicast
[   10.627370] Bluetooth: BNEP socket layer initialized
[   10.634365] NET: Registered protocol family 38

[    1.588106] ata5: SATA link down (SStatus 0 SControl 330)
[    1.901618] ata6: SATA link down (SStatus 0 SControl 330)
[    1.909107] scsi host9: pata_legacy
[    1.909578] ata11: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    2.074291] libphy: Fixed MDIO Bus: probed
[    2.074752] tun: Universal TUN/TAP device driver, 1.6
[    2.075283] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.075770] ehci-pci: EHCI PCI platform driver
[    2.076253] ehci-platform: EHCI generic platform driver
[    2.076733] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.077210] ohci-pci: OHCI PCI platform driver
[    2.077695] ohci-platform: OHCI generic platform driver
[    2.078177] uhci_hcd: USB Universal Host Controller Interface driver
[    2.078746] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    2.079235] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe                                                                                                                                                             r 1
[    2.135016] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 qu                                                                                                                                                             irks 0x0000000000000410
[    2.135598] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc                                                                                                                                                             dDevice= 5.04
[    2.136050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=                                                                                                                                                             1
[    2.136496] usb usb1: Product: xHCI Host Controller
[    2.136935] usb usb1: Manufacturer: Linux 5.4.52 xhci-hcd
[    2.137369] usb usb1: SerialNumber: 0000:01:00.0
[    2.137874] hub 1-0:1.0: USB hub found
[    2.138341] hub 1-0:1.0: 10 ports detected
[    2.142318] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    2.142791] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe                                                                                                                                                             r 2
[    2.143270] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    2.143827] usb usb2: We don't know the algorithms for LPM for this host, dis                                                                                                                                                             abling LPM.
[    2.144275] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc                                                                                                                                                             dDevice= 5.04
[    2.144706] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=                                                                                                                                                             1
[    2.145133] usb usb2: Product: xHCI Host Controller
[    2.145556] usb usb2: Manufacturer: Linux 5.4.52 xhci-hcd
[    2.145974] usb usb2: SerialNumber: 0000:01:00.0
[    2.146566] hub 2-0:1.0: USB hub found
[    2.147024] hub 2-0:1.0: 4 ports detected
[    2.149040] xhci_hcd 0000:09:00.3: xHCI Host Controller
[    2.149450] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus numbe                                                                                                                                                             r 3
[    2.149944] xhci_hcd 0000:09:00.3: hcc params 0x0270f665 hci version 0x100 qu                                                                                                                                                             irks 0x0000000040000410
[    2.150440] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bc                                                                                                                                                             dDevice= 5.04
[    2.150853] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=                                                                                                                                                             1
[    2.151277] usb usb3: Product: xHCI Host Controller
[    2.151722] usb usb3: Manufacturer: Linux 5.4.52 xhci-hcd
[    2.152167] usb usb3: SerialNumber: 0000:09:00.3
[    2.152718] hub 3-0:1.0: USB hub found
[    2.153120] hub 3-0:1.0: 4 ports detected
[    2.153599] xhci_hcd 0000:09:00.3: xHCI Host Controller
[    2.153985] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus numbe                                                                                                                                                             r 4
[    2.154369] xhci_hcd 0000:09:00.3: Host supports USB 3.0 SuperSpeed
[    2.154751] usb usb4: We don't know the algorithms for LPM for this host, dis                                                                                                                                                             abling LPM.
[    2.155144] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bc                                                                                                                                                             dDevice= 5.04
[    2.155576] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=                                                                                                                                                             1
[    2.156004] usb usb4: Product: xHCI Host Controller
[    2.156431] usb usb4: Manufacturer: Linux 5.4.52 xhci-hcd
[    2.156857] usb usb4: SerialNumber: 0000:09:00.3
[    2.157339] hub 4-0:1.0: USB hub found
[    2.157791] hub 4-0:1.0: 4 ports detected
[    2.158291] usbcore: registered new interface driver cdc_acm
[    2.158670] cdc_acm: USB Abstract Control Model driver for USB modems and ISD                                                                                                                                                             N adapters
[    2.159219] usbcore: registered new interface driver uas
[    2.159653] usbcore: registered new interface driver usb-storage
[    2.160080] usbcore: registered new interface driver ums-alauda
[    2.160524] usbcore: registered new interface driver ums-cypress
[    2.160951] usbcore: registered new interface driver ums-datafab
[    2.161320] usbcore: registered new interface driver ums_eneub6250
[    2.161677] usbcore: registered new interface driver ums-freecom
[    2.162027] usbcore: registered new interface driver ums-isd200
[    2.162366] usbcore: registered new interface driver ums-jumpshot
[    2.162701] usbcore: registered new interface driver ums-karma
[    2.163032] usbcore: registered new interface driver ums-onetouch
[    2.163385] usbcore: registered new interface driver ums-realtek
[    2.163741] usbcore: registered new interface driver ums-sddr09
[    2.164096] usbcore: registered new interface driver ums-sddr55
[    2.164461] usbcore: registered new interface driver ums-usbat
[    2.164836] i8042: PNP: No PS/2 controller found.
[    2.165238] rtc_cmos 00:01: RTC can wake from S4
[    2.165793] rtc_cmos 00:01: registered as rtc0
[    2.166104] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpe                                                                                                                                                             t irqs
[    2.166406] i2c /dev entries driver
[    2.166997] ledtrig-cpu: registered to indicate activity on CPUs
[    2.167333] EFI Variables Facility v0.08 2004-May-17
[    2.194418] NET: Registered protocol family 17
[    2.194785] NET: Registered protocol family 33
[    2.195123] Key type rxrpc registered
[    2.195452] Key type rxrpc_s registered
[    2.195820] Key type dns_resolver registered
[    2.196739] microcode: CPU0: patch_level=0x08001138
[    2.197058] microcode: CPU1: patch_level=0x08001138
[    2.197365] microcode: CPU2: patch_level=0x08001138
[    2.197676] microcode: CPU3: patch_level=0x08001138
[    2.198060] microcode: CPU4: patch_level=0x08001138
[    2.198431] microcode: CPU5: patch_level=0x08001138
[    2.198794] microcode: CPU6: patch_level=0x08001138
[    2.199153] microcode: CPU7: patch_level=0x08001138
[    2.199496] microcode: CPU8: patch_level=0x08001138
[    2.199794] microcode: CPU9: patch_level=0x08001138
[    2.200128] microcode: CPU10: patch_level=0x08001138
[    2.200453] microcode: CPU11: patch_level=0x08001138
[    2.200786] microcode: Microcode Update Driver: v2.2.
[    2.200788] IPI shorthand broadcast: enabled
[    2.201269] sched_clock: Marking stable (2212020156, -10993888)->(2246391327,                                                                                                                                                              -45365059)
[    2.201630] registered taskstats version 1
[    2.201874] Loading compiled-in X.509 certificates
[    2.202730] Loaded X.509 cert 'Build time autogenerated kernel key: 826c84c26                                                                                                                                                             702261d1b84c8befde52fa33dba52bf'
[    2.203018] zswap: loaded using pool lzo/zbud
[    2.203613] Key type big_key registered
[    2.203971] Key type encrypted registered
[    2.204453] rtc_cmos 00:01: setting system clock to 2020-10-11T09:11:51 UTC (                                                                                                                                                             1602407511)
[    2.204900] acpi_cpufreq: overriding BIOS provided _PSD data
[    2.206131] Freeing unused kernel image memory: 1728K
[    2.218031] Write protecting the kernel read-only data: 20480k
[    2.218788] Freeing unused kernel image memory: 2016K
[    2.219394] Freeing unused kernel image memory: 1920K
[    2.219685] Run /init as init process
[    2.470937] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    2.478751] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    2.494726] usb 2-2: New USB device found, idVendor=1058, idProduct=263a, bcd                                                                                                                                                             Device=50.06
[    2.495094] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    2.495394] usb 2-2: Product: Game Drive
[    2.495695] usb 2-2: Manufacturer: Western Digital
[    2.496010] usb 2-2: SerialNumber: 3550484552455644
[    2.504237] usb-storage 2-2:1.0: USB Mass Storage device detected
[    2.504783] scsi host9: usb-storage 2-2:1.0
[    2.551294] EXT4-fs (sdb3): recovery complete
[    2.553123] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts:                                                                                                                                                              (null)
[    2.565810] /dev/loop0: Can't open blockdev
[    2.568787] random: fast init done
[    2.638789] usb 3-1: New USB device found, idVendor=1131, idProduct=1004, bcd                                                                                                                                                             Device= 3.73
[    2.639154] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.639515] usb 3-1: Product: ISSCEDRBTA
[    2.639877] usb 3-1: Manufacturer: ISSC
[    2.761015] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[    2.867171] udevd[326]: starting version 3.2.9
[    2.871062] random: udevd: uninitialized urandom read (16 bytes read)
[    2.871667] random: udevd: uninitialized urandom read (16 bytes read)
[    2.872105] random: udevd: uninitialized urandom read (16 bytes read)
[    2.875680] udevd[327]: starting eudev-3.2.9
[    2.903787] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C                                                                                                                                                             9062910 (first instance was on PNP0C14:00)
[    2.915234] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revisio                                                                                                                                                             n 0
[    2.915773] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port sele                                                                                                                                                             ction
[    2.916462] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb2                                                                                                                                                             0
[    2.917212] ccp 0000:09:00.2: enabling device (0000 -> 0002)
[    2.918892] ccp 0000:09:00.2: ccp enabled
[    2.932400] random: crng init done
[    2.932826] random: 5 urandom warning(s) missed due to ratelimiting
[    2.937573] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    2.938335] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    2.938396] cryptd: max_cpu_qlen set to 1000
[    2.938959] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    2.940520] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.946794] usb 3-2: New USB device found, idVendor=045e, idProduct=0291, bcd                                                                                                                                                             Device= 1.14
[    2.947641] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.949001] AVX2 version of gcm_enc/dec engaged.
[    2.949822] AES CTR mode by8 optimization enabled
[    2.950496] asus_wmi: ASUS WMI generic driver loaded
[    2.951812] libphy: r8169: probed
[    2.952443] r8169 0000:07:00.0 eth0: RTL8168h/8111h, 40:b0:76:44:d6:52, XID 5                                                                                                                                                             41, IRQ 49
[    2.952885] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx c                                                                                                                                                             hecksumming: ko]
[    2.967527] asus_wmi: Initialization: 0x0
[    2.968180] asus_wmi: BIOS WMI version: 0.9
[    2.968851] asus_wmi: SFUN value: 0x0
[    2.969351] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[    2.970293] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/in                                                                                                                                                             put2
[    2.994520] snd_hda_intel 0000:08:00.1: Handle vga_switcheroo audio client
[    2.995157] snd_hda_intel 0000:08:00.1: Force to non-snoop mode
[    2.995860] snd_hda_intel 0000:0a:00.3: enabling device (0000 -> 0002)
[    3.031532] [drm] amdgpu kernel modesetting enabled.
[    3.032040] Parsing CRAT table with 1 nodes
[    3.032469] Ignoring ACPI CRAT on non-APU system
[    3.032899] Virtual CRAT table created for CPU
[    3.033336] Parsing CRAT table with 1 nodes
[    3.033764] Creating topology SYSFS entries
[    3.034195] Topology: Add CPU node
[    3.034606] Finished initializing topology
[    3.035126] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0:                                                                                                                                                              0xe0000000 -> 0xefffffff
[    3.035563] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2:                                                                                                                                                              0xf0000000 -> 0xf01fffff
[    3.036005] amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5:                                                                                                                                                              0xfcf00000 -> 0xfcf3ffff
[    3.036447] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    3.036447] fb0: switching to amdgpudrmfb from EFI VGA
[    3.036956] Console: switching to colour dummy device 80x25
[    3.037000] amdgpu 0000:08:00.0: vgaarb: deactivate vga console
[    3.037258] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x                                                                                                                                                             174B:0x353E 0xEF).
[    3.037272] [drm] register mmio base: 0xFCF00000
[    3.037274] [drm] register mmio size: 262144
[    3.037283] [drm] add ip block number 0 <vi_common>
[    3.037285] [drm] add ip block number 1 <gmc_v8_0>
[    3.037287] [drm] add ip block number 2 <tonga_ih>
[    3.037290] [drm] add ip block number 3 <gfx_v8_0>
[    3.037292] [drm] add ip block number 4 <sdma_v3_0>
[    3.037295] [drm] add ip block number 5 <powerplay>
[    3.037298] [drm] add ip block number 6 <dm>
[    3.037300] [drm] add ip block number 7 <uvd_v6_0>
[    3.037303] [drm] add ip block number 8 <vce_v3_0>
[    3.037508] ATOM BIOS: 113-YE353HM-TOE
[    3.037522] [drm] UVD is enabled in VM mode
[    3.037524] [drm] UVD ENC is enabled in VM mode
[    3.037526] [drm] VCE enabled in VM mode
[    3.037549] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment                                                                                                                                                              size is 9-bit
[    3.039044] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:                                                                                                                                                             03.1/0000:08:00.1/sound/card0/input3
[    3.039097] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:                                                                                                                                                             03.1/0000:08:00.1/sound/card0/input4
[    3.039139] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:                                                                                                                                                             03.1/0000:08:00.1/sound/card0/input5
[    3.039179] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:                                                                                                                                                             03.1/0000:08:00.1/sound/card0/input6
[    3.039218] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00                                                                                                                                                             :03.1/0000:08:00.1/sound/card0/input7
[    3.039256] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00                                                                                                                                                             :03.1/0000:08:00.1/sound/card0/input8
[    3.040791] amdgpu 0000:08:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5F                                                                                                                                                             FFFFFFF (8192M used)
[    3.040795] amdgpu 0000:08:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0F                                                                                                                                                             FFFFFF

[    0.242172] pci 0000:07:00.0: supports D1 D2
[    0.242173] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.242337] pci 0000:02:07.0: PCI bridge to [bus 07]
[    0.242342] pci 0000:02:07.0:   bridge window [io  0xf000-0xffff]
[    0.242346] pci 0000:02:07.0:   bridge window [mem 0xfcc00000-0xfccfffff]
[    0.242433] pci 0000:08:00.0: [1002:67df] type 00 class 0x030000
[    0.242456] pci 0000:08:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref                                                                                                                                                             ]
[    0.242466] pci 0000:08:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref                                                                                                                                                             ]
[    0.242473] pci 0000:08:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.242480] pci 0000:08:00.0: reg 0x24: [mem 0xfcf00000-0xfcf3ffff]
[    0.242486] pci 0000:08:00.0: reg 0x30: [mem 0xfcf40000-0xfcf5ffff pref]
[    0.242498] pci 0000:08:00.0: BAR 0: assigned to efifb
[    0.242547] pci 0000:08:00.0: supports D1 D2
[    0.242549] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.242626] pci 0000:08:00.1: [1002:aaf0] type 00 class 0x040300
[    0.242645] pci 0000:08:00.1: reg 0x10: [mem 0xfcf60000-0xfcf63fff 64bit]
[    0.242710] pci 0000:08:00.1: supports D1 D2
[    0.242780] pci 0000:00:03.1: PCI bridge to [bus 08]
[    0.242784] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.242786] pci 0000:00:03.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.242790] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bi                                                                                                                                                             t pref]
[    0.242853] pci 0000:09:00.0: [1022:145a] type 00 class 0x130000
[    0.242879] pci 0000:09:00.0: enabling Extended Tags
[    0.242939] pci 0000:09:00.2: [1022:1456] type 00 class 0x108000
[    0.242954] pci 0000:09:00.2: reg 0x18: [mem 0xfca00000-0xfcafffff]
[    0.242962] pci 0000:09:00.2: reg 0x24: [mem 0xfcb00000-0xfcb01fff]
[    0.242969] pci 0000:09:00.2: enabling Extended Tags
[    0.243047] pci 0000:09:00.3: [1022:145c] type 00 class 0x0c0330
[    0.243061] pci 0000:09:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
[    0.243081] pci 0000:09:00.3: enabling Extended Tags
[    0.243109] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
[    0.243163] pci 0000:00:07.1: PCI bridge to [bus 09]
[    0.243168] pci 0000:00:07.1:   bridge window [mem 0xfc900000-0xfcbfffff]
[    0.243238] pci 0000:0a:00.0: [1022:1455] type 00 class 0x130000
[    0.243265] pci 0000:0a:00.0: enabling Extended Tags
[    0.243330] pci 0000:0a:00.2: [1022:7901] type 00 class 0x010601
[    0.243358] pci 0000:0a:00.2: reg 0x24: [mem 0xfce08000-0xfce08fff]
[    0.243366] pci 0000:0a:00.2: enabling Extended Tags
[    0.243395] pci 0000:0a:00.2: PME# supported from D3hot D3cold
[    0.243442] pci 0000:0a:00.3: [1022:1457] type 00 class 0x040300
[    0.243453] pci 0000:0a:00.3: reg 0x10: [mem 0xfce00000-0xfce07fff]
[    0.243472] pci 0000:0a:00.3: enabling Extended Tags
[    0.243500] pci 0000:0a:00.3: PME# supported from D0 D3hot D3cold
[    0.243556] pci 0000:00:08.1: PCI bridge to [bus 0a]
[    0.243561] pci 0000:00:08.1:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.243806] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.243849] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.243885] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.243930] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.243971] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.244010] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.244047] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.244083] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.244456] iommu: Default domain type: Translated
[    0.244456] pci 0000:08:00.0: vgaarb: setting as boot VGA device
[    0.244456] pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=i                                                                                                                                                             o+mem,locks=none
[    0.244456] pci 0000:08:00.0: vgaarb: bridge control possible
[    0.244456] vgaarb: loaded
[    0.244456] SCSI subsystem initialized
[    0.244456] libata version 3.00 loaded.
[    0.244456] ACPI: bus type USB registered
[    0.244456] usbcore: registered new interface driver usbfs
[    0.244456] usbcore: registered new interface driver hub
[    0.244456] usbcore: registered new device driver usb
[    0.244456] EDAC MC: Ver: 3.0.0
[    0.244456] Registered efivars operations
[    0.245036] PCI: Using ACPI for IRQ routing
[    0.249289] PCI: pci_cache_line_size set to 64 bytes
[    0.249342] e820: reserve RAM buffer [mem 0x09e10000-0x0bffffff]
[    0.249343] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.249344] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.249344] e820: reserve RAM buffer [mem 0xd1475000-0xd3ffffff]
[    0.249345] e820: reserve RAM buffer [mem 0xd6dd9000-0xd7ffffff]
[    0.249345] e820: reserve RAM buffer [mem 0xd7c77000-0xd7ffffff]
[    0.249346] e820: reserve RAM buffer [mem 0xda3d5000-0xdbffffff]
[    0.249347] e820: reserve RAM buffer [mem 0xda629000-0xdbffffff]
[    0.249347] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
[    0.249348] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[    0.249410] NetLabel: Initializing
[    0.249412] NetLabel:  domain hash size = 128
[    0.249413] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.249422] NetLabel:  unlabeled traffic allowed by default
[    0.249432] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.249432] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.251038] clocksource: Switched to clocksource tsc-early
[    0.262456] VFS: Disk quotas dquot_6.6.0
[    0.262474] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.262532] pnp: PnP ACPI init
[    0.262637] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.262642] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.262697] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.262799] system 00:02: [io  0x0300-0x030f] has been reserved
[    0.262802] system 00:02: [io  0x0230-0x023f] has been reserved
[    0.262805] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.262808] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262992] pnp 00:03: [dma 0 disabled]
[    0.263018] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.263150] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.263153] system 00:04: [io  0x040b] has been reserved
[    0.263155] system 00:04: [io  0x04d6] has been reserved
[    0.263157] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.263159] system 00:04: [io  0x0c14] has been reserved
[    0.263161] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.263163] system 00:04: [io  0x0c52] has been reserved
[    0.263165] system 00:04: [io  0x0c6c] has been reserved
[    0.263167] system 00:04: [io  0x0c6f] has been reserved
[    0.263169] system 00:04: [io  0x0cd0-0x0cd1] has been reserved
[    0.263171] system 00:04: [io  0x0cd2-0x0cd3] has been reserved
[    0.263173] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
[    0.263175] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
[    0.263177] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.263179] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.263181] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.263183] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.263185] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.263187] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.263190] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.263192] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.263195] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.263197] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.263199] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.263201] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.263204] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.263207] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.263489] pnp: PnP ACPI: found 5 devices
[    0.264679] thermal_sys: Registered thermal governor 'fair_share'
[    0.264679] thermal_sys: Registered thermal governor 'bang_bang'
[    0.264682] thermal_sys: Registered thermal governor 'step_wise'
[    0.264685] thermal_sys: Registered thermal governor 'user_space'
[    0.264687] thermal_sys: Registered thermal governor 'power_allocator'
[    0.269239] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id                                                                                                                                                             le_ns: 2085701024 ns
[    0.269272] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.269284] pci 0000:02:04.0: PCI bridge to [bus 04]
[    0.269294] pci 0000:02:05.0: PCI bridge to [bus 05]
[    0.269303] pci 0000:02:06.0: PCI bridge to [bus 06]
[    0.269313] pci 0000:02:07.0: PCI bridge to [bus 07]
[    0.269317] pci 0000:02:07.0:   bridge window [io  0xf000-0xffff]
[    0.269321] pci 0000:02:07.0:   bridge window [mem 0xfcc00000-0xfccfffff]
[    0.269328] pci 0000:01:00.2: PCI bridge to [bus 02-07]
[    0.269331] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.269336] pci 0000:01:00.2:   bridge window [mem 0xfcc00000-0xfccfffff]
[    0.269343] pci 0000:00:01.3: PCI bridge to [bus 01-07]
[    0.269345] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.269348] pci 0000:00:01.3:   bridge window [mem 0xfcc00000-0xfcdfffff]
[    0.269353] pci 0000:00:03.1: PCI bridge to [bus 08]
[    0.269356] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.269359] pci 0000:00:03.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.269362] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bi                                                                                                                                                             t pref]
[    0.269366] pci 0000:00:07.1: PCI bridge to [bus 09]
[    0.269369] pci 0000:00:07.1:   bridge window [mem 0xfc900000-0xfcbfffff]
[    0.269374] pci 0000:00:08.1: PCI bridge to [bus 0a]
[    0.269377] pci 0000:00:08.1:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.269383] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.269385] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.269387] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.269389] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.269391] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.269393] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.269395] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.269397] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.269400] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.269402] pci_bus 0000:01: resource 1 [mem 0xfcc00000-0xfcdfffff]
[    0.269404] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.269406] pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfccfffff]
[    0.269408] pci_bus 0000:07: resource 0 [io  0xf000-0xffff]
[    0.269410] pci_bus 0000:07: resource 1 [mem 0xfcc00000-0xfccfffff]
[    0.269412] pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
[    0.269413] pci_bus 0000:08: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.269415] pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref                                                                                                                                                             ]
[    0.269418] pci_bus 0000:09: resource 1 [mem 0xfc900000-0xfcbfffff]
[    0.269420] pci_bus 0000:0a: resource 1 [mem 0xfce00000-0xfcefffff]
[    0.269472] NET: Registered protocol family 2
[    0.269583] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 1310                                                                                                                                                             72 bytes, linear)
[    0.269603] TCP established hash table entries: 131072 (order: 8, 1048576 byt                                                                                                                                                             es, linear)
[    0.269755] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, line                                                                                                                                                             ar)
[    0.269884] TCP: Hash tables configured (established 131072 bind 65536)
[    0.269920] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.269952] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear                                                                                                                                                             )
[    0.270028] NET: Registered protocol family 1
[    0.270167] pci 0000:08:00.0: Video device with shadowed ROM at [mem 0x000c00                                                                                                                                                             00-0x000dffff]
[    0.270175] pci 0000:08:00.1: D0 power state depends on 0000:08:00.0
[    0.270294] PCI: CLS 64 bytes, default 64
[    0.270322] Trying to unpack rootfs image as initramfs...
[    0.278891] Freeing initrd memory: 760K
[    0.278905] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.279181] pci 0000:00:01.0: Adding to iommu group 0
[    0.279343] pci 0000:00:01.3: Adding to iommu group 1
[    0.279490] pci 0000:00:02.0: Adding to iommu group 2
[    0.279654] pci 0000:00:03.0: Adding to iommu group 3
[    0.279796] pci 0000:00:03.1: Adding to iommu group 4
[    0.279951] pci 0000:00:04.0: Adding to iommu group 5
[    0.280097] pci 0000:00:07.0: Adding to iommu group 6
[    0.280267] pci 0000:00:07.1: Adding to iommu group 7
[    0.280413] pci 0000:00:08.0: Adding to iommu group 8
[    0.280577] pci 0000:00:08.1: Adding to iommu group 9
[    0.280738] pci 0000:00:14.0: Adding to iommu group 10
[    0.280753] pci 0000:00:14.3: Adding to iommu group 10
[    0.280934] pci 0000:00:18.0: Adding to iommu group 11
[    0.280951] pci 0000:00:18.1: Adding to iommu group 11
[    0.280965] pci 0000:00:18.2: Adding to iommu group 11
[    0.280977] pci 0000:00:18.3: Adding to iommu group 11
[    0.280992] pci 0000:00:18.4: Adding to iommu group 11
[    0.281006] pci 0000:00:18.5: Adding to iommu group 11
[    0.281022] pci 0000:00:18.6: Adding to iommu group 11
[    0.281035] pci 0000:00:18.7: Adding to iommu group 11
[    0.281198] pci 0000:01:00.0: Adding to iommu group 12
[    0.281221] pci 0000:01:00.1: Adding to iommu group 12
[    0.281244] pci 0000:01:00.2: Adding to iommu group 12
[    0.281257] pci 0000:02:00.0: Adding to iommu group 12
[    0.281270] pci 0000:02:04.0: Adding to iommu group 12
[    0.281283] pci 0000:02:05.0: Adding to iommu group 12
[    0.281297] pci 0000:02:06.0: Adding to iommu group 12
[    0.281311] pci 0000:02:07.0: Adding to iommu group 12
[    0.281333] pci 0000:07:00.0: Adding to iommu group 12
[    0.281521] pci 0000:08:00.0: Adding to iommu group 13
[    0.281548] pci 0000:08:00.0: Using iommu direct mapping
[    0.281572] pci 0000:08:00.1: Adding to iommu group 13
[    0.281655] pci 0000:09:00.0: Adding to iommu group 14
[    0.281773] pci 0000:09:00.2: Adding to iommu group 15
[    0.281938] pci 0000:09:00.3: Adding to iommu group 16
[    0.282091] pci 0000:0a:00.0: Adding to iommu group 17
[    0.282261] pci 0000:0a:00.2: Adding to iommu group 18
[    0.282413] pci 0000:0a:00.3: Adding to iommu group 19
[    0.282667] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.282670] pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada):
[    0.282672]  PPR NX GT IA GA PC GA_vAPIC
[    0.282675] AMD-Vi: Interrupt remapping enabled
[    0.282676] AMD-Vi: Virtual APIC enabled
[    0.282829] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.283719] amd_uncore: AMD NB counters detected
[    0.283724] amd_uncore: AMD LLC counters detected
[    0.283924] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.283978] check: Scanning for low memory corruption every 60 seconds
[    0.284353] Initialise system trusted keyrings
[    0.284380] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.285121] zbud: loaded
[    0.285341] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.285359] fuse: init (API version 7.31)
[    0.288321] Key type asymmetric registered
[    0.288324] Asymmetric key pa**er 'x509' registered
[    0.288332] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                                                                                                                             46)
[    0.288370] io scheduler mq-deadline registered
[    0.288372] io scheduler kyber registered
[    0.289370] pcieport 0000:00:01.3: PME: Signaling with IRQ 26
[    0.289433] pcieport 0000:00:01.3: AER: enabled with IRQ 26
[    0.289610] pcieport 0000:00:03.1: PME: Signaling with IRQ 27
[    0.289651] pcieport 0000:00:03.1: AER: enabled with IRQ 27
[    0.289821] pcieport 0000:00:07.1: PME: Signaling with IRQ 28
[    0.289864] pcieport 0000:00:07.1: AER: enabled with IRQ 28
[    0.290067] pcieport 0000:00:08.1: PME: Signaling with IRQ 30
[    0.290110] pcieport 0000:00:08.1: AER: enabled with IRQ 30
[    0.290802] efifb: probing for efifb
[    0.290811] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.290813] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.290815] efifb: scrolling: redraw
[    0.290816] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.291855] Console: switching to colour frame buffer device 128x48
[    0.292849] fb0: EFI VGA frame buffer device
[    0.292926] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0                                                                                                                                                             0/input/input0
[    0.292956] ACPI: Power Button [PWRB]
[    0.292986] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp                                                                                                                                                             ut1
[    0.294632] ACPI: Power Button [PWRF]
[    0.294678] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.294756] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.294850] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.294923] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.295022] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.295121] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.295216] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.295276] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.295350] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.295434] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.296873] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.297004] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.297258] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.318212] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655                                                                                                                                                             0A
[    0.318946] Linux agpgart interface v0.103
[    0.320655] brd: module loaded
[    0.322568] loop: module loaded
[    0.322790] ahci 0000:01:00.1: version 3.0
[    0.322883] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    0.323257] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 im                                                                                                                                                             pl SATA mode
[    0.323601] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp                                                                                                                                                              pio slum part sxs deso sadm sds apst
[    0.324311] scsi host0: ahci
[    0.324740] scsi host1: ahci
[    0.325146] scsi host2: ahci
[    0.325548] scsi host3: ahci
[    0.326032] scsi host4: ahci
[    0.326419] scsi host5: ahci
[    0.326812] scsi host6: ahci
[    0.327171] scsi host7: ahci
[    0.327492] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 i                                                                                                                                                             rq 40
[    0.327804] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 i                                                                                                                                                             rq 40
[    0.328108] ata3: DUMMY
[    0.328406] ata4: DUMMY
[    0.328706] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 i                                                                                                                                                             rq 40
[    0.329018] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 i                                                                                                                                                             rq 40
[    0.329326] ata7: DUMMY
[    0.329633] ata8: DUMMY
[    0.330033] ahci 0000:0a:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 imp                                                                                                                                                             l SATA mode
[    0.330353] ahci 0000:0a:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp                                                                                                                                                              fbs pio slum part
[    0.330785] scsi host8: ahci
[    0.331127] ata9: SATA max UDMA/133 abar m4096@0xfce08000 port 0xfce08100 irq                                                                                                                                                              42
[    0.331970] scsi host9: pata_legacy
[    0.332325] ata10: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    0.642678] ata9: SATA link down (SStatus 0 SControl 300)
[    0.804872] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.806240] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC64G, max UDMA/133
[    0.806563] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.808018] ata1.00: configured for UDMA/133
[    0.808419] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54502 C64G PQ                                                                                                                                                             : 0 ANSI: 5
[    0.808844] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    0.808949] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233                                                                                                                                                              GiB)
[    0.809521] sd 0:0:0:0: [sda] Write Protect is off
[    0.809872] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.809888] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does                                                                                                                                                             n't support DPO or FUA
[    0.857317]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    0.858098] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.276434] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.277048] ata2.00: ATA-9: SPCC Solid State Disk, V1.2.2, max UDMA/133
[    1.277431] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.277984] ata2.00: configured for UDMA/133
[    1.278624] scsi 1:0:0:0: Direct-Access     ATA      SPCC Solid State .2   PQ                                                                                                                                                             : 0 ANSI: 5
[    1.279182] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.279327] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238                                                                                                                                                              GiB)
[    1.280079] sd 1:0:0:0: [sdb] Write Protect is off
[    1.280497] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.280506] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does                                                                                                                                                             n't support DPO or FUA
[    1.281395]  sdb: sdb1 sdb2 sdb3
[    1.282135] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.300436] tsc: Refined TSC clocksource calibration: 3593.248 MHz
[    1.300938] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb68e6                                                                                                                                                             ea4, max_idle_ns: 440795288133 ns
[    1.301428] clocksource: Switched to clocksource tsc

@davidb2111 Voila le résultat de la commande dmesg :

[    0.000000] Linux version 5.4.52 (root@94c1c75e4166) (gcc version 7.5.0 (Buil                                                                                                                                                             droot 2020.02.4-dirty)) #1 SMP PREEMPT Fri Oct 2 10:11:32 CEST 2020
[    0.000000] Command line: BOOT_IMAGE=/boot/linux label=RECALBOX console=tty1                                                                                                                                                              loglevel=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point regi                                                                                                                                                             sters'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,                                                                                                                                                              using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009e0ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009e10000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000d1474fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d1475000-0x00000000d1492fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d1493000-0x00000000da3d4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da3d5000-0x00000000da512fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da513000-0x00000000da520fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000da521000-0x00000000da628fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da629000-0x00000000da9e9fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da9ea000-0x00000000db7b8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000db7b9000-0x00000000ddffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xd1475000  ACPI=0xd1475000  SMBIOS=0xdb685000  SM                                                                                                                                                             BIOS 3.0=0xdb684000  ESRT=0xd7c77f18  MEMATTR=0xd73f0018
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: System manufacturer System Product Name/PRIME B450M-K, BIOS                                                                                                                                                              1814 08/21/2019
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000420000000 aka 16896M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xde000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000d7c77f18 to 0x00000000d                                                                                                                                                             7c77f50.
[    0.000000] e820: update [mem 0xd7c77000-0xd7c77fff] usable ==> reserved
[    0.000000] check: Scanning 1 areas for low memory corruption
[    0.000000] Using GB pages for direct mapping
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x37e74000-0x37f31fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000D1475000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000D14750A0 0000BC (v01 ALASKA A M I    0107200                                                                                                                                                             9 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D1480538 000114 (v06 ALASKA A M I    0107200                                                                                                                                                             9 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000D14751F8 00B340 (v02 ALASKA A M I    0107200                                                                                                                                                             9 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DA9D1D80 000040
[    0.000000] ACPI: APIC 0x00000000D1480650 00015E (v03 ALASKA A M I    0107200                                                                                                                                                             9 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000D14807B0 000044 (v01 ALASKA A M I    0107200                                                                                                                                                             9 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000D14807F8 00009C (v01 ALASKA A M I    0107200                                                                                                                                                             9 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000D1480898 0000C8 (v02 ALASKA CPUSSDT  0107200                                                                                                                                                             9 AMI  01072009)
[    0.000000] ACPI: SSDT 0x00000000D1490FB0 0010AF (v01 AMD    AmdTable 0000000                                                                                                                                                             1 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000D14809B8 008C98 (v02 AMD    AMD ALIB 0000000                                                                                                                                                             2 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000D1489650 003301 (v01 AMD    AMD AOD  0000000                                                                                                                                                             1 INTL 20120913)
[    0.000000] ACPI: MCFG 0x00000000D148C958 00003C (v01 ALASKA A M I    0107200                                                                                                                                                             9 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000D148C998 000038 (v01 ALASKA A M I    0107200                                                                                                                                                             9 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000D148C9D0 000024 (v01 AMDFCH FCHZP    0000100                                                                                                                                                             0 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000D148C9F8 000042 (v01                 0000000                                                                                                                                                             0      00000000)
[    0.000000] ACPI: BGRT 0x00000000D148CA40 000038 (v01 ALASKA A M I    0107200                                                                                                                                                             9 AMI  00010013)
[    0.000000] ACPI: IVRS 0x00000000D148CA78 0000D0 (v02 AMD    AMD IVRS 0000000                                                                                                                                                             1 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000D148CB48 001A58 (v01 AMD    AMD CPU  0000000                                                                                                                                                             1 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000D148E5A0 000BD0 (v01 AMD    AMD CRAT 0000000                                                                                                                                                             1 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000D148F170 000029 (v01 AMD    AMD CDIT 0000000                                                                                                                                                             1 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000D148F1A0 001D4A (v01 AMD    AmdTable 0000000                                                                                                                                                             1 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000D1490EF0 0000BF (v01 AMD    AMD PT   0000100                                                                                                                                                             0 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] system APIC only can use physical flat
[    0.000000] Setting APIC routing to physical flat.
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009e0ffff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a20b000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000d1474fff]
[    0.000000]   node   0: [mem 0x00000000d1493000-0x00000000da3d4fff]
[    0.000000]   node   0: [mem 0x00000000da521000-0x00000000da628fff]
[    0.000000]   node   0: [mem 0x00000000db7b9000-0x00000000ddffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000] Zeroed struct page in unavailable ranges: 16886 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[    0.000000] On node 0 totalpages: 4177418
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 27 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14060 pages used for memmap
[    0.000000]   DMA32 zone: 899819 pages, LIFO batch:63
[    0.000000]   Normal zone: 51150 pages used for memmap
[    0.000000]   Normal zone: 3273600 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] system APIC only can use physical flat
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] e820: update [mem 0xd6dd9000-0xd6eccfff] usable ==> reserved
[    0.000000] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[    0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff                                                                                                                                                             ffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_no                                                                                                                                                             de_ids:1
[    0.000000] percpu: Embedded 53 pages/cpu s177624 r8192 d31272 u262144
[    0.000000] pcpu-alloc: s177624 r8192 d31272 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14                                                                                                                                                              15
[    0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30                                                                                                                                                              31
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4112117
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/linux label=RECALBOX consol                                                                                                                                                             e=tty1 loglevel=7
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 byt                                                                                                                                                             es, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes                                                                                                                                                             , linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16239004K/16709672K available (12291K kernel code, 1581K                                                                                                                                                              rwdata, 4224K rodata, 1728K init, 2972K bss, 470668K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.000000] ftrace: allocating 40525 entries in 159 pages
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 ji                                                                                                                                                             ffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.000000] NR_IRQS: 16640, nr_irqs: 1224, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x32f/0x516 wit                                                                                                                                                             h crng_init=0
[    0.000000] Console: colour dummy device 80x25
[    0.000000] printk: console [tty1] enabled
[    0.000000] ACPI: Core revision 20190816
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i                                                                                                                                                             dle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.003000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.011000] tsc: Unable to calibrate against PIT
[    0.011000] tsc: using HPET reference calibration
[    0.011000] tsc: Detected 3592.743 MHz processor
[    0.000003] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33                                                                                                                                                             c98c2a3c5, max_idle_ns: 440795318697 ns
[    0.000007] Calibrating delay loop (skipped), value calculated using timer fr                                                                                                                                                             equency.. 7185.48 BogoMIPS (lpj=3592743)
[    0.000010] pid_max: default: 32768 minimum: 301
[    0.001850] LSM: Security Framework initializing
[    0.001854] Yama: becoming mindful.
[    0.001905] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, li                                                                                                                                                             near)
[    0.001929] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 byte                                                                                                                                                             s, linear)
[    0.002137] LVT offset 1 assigned for vector 0xf9
[    0.002197] LVT offset 2 assigned for vector 0xf4
[    0.002213] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.002215] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.002218] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user poin                                                                                                                                                             ter sanitization
[    0.002221] Spectre V2 : Mitigation: Full AMD retpoline
[    0.002223] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on c                                                                                                                                                             ontext switch
[    0.002225] Spectre V2 : mitigation: Enabling conditional Indirect Branch Pre                                                                                                                                                             diction Barrier
[    0.002228] Spectre V2 : User space: Vulnerable
[    0.002229] Speculative Store Bypass: Mitigation: Speculative Store Bypass di                                                                                                                                                             sabled via prctl and seccomp
[    0.002413] Freeing SMP alternatives memory: 32K
[    0.105877] smpboot: CPU0: AMD Ryzen 5 1600X Six-Core Processor (family: 0x17                                                                                                                                                             , model: 0x1, stepping: 0x1)
[    0.111016] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.111024] ... version:                0
[    0.111026] ... bit width:              48
[    0.111027] ... generic registers:      6
[    0.111029] ... value mask:             0000ffffffffffff
[    0.111031] ... max period:             00007fffffffffff
[    0.111032] ... fixed-purpose events:   0
[    0.111034] ... event mask:             000000000000003f
[    0.113010] rcu: Hierarchical SRCU implementation.
[    0.117010] smp: Bringing up secondary CPUs ...
[    0.125028] x86: Booting SMP configuration:
[    0.125033] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #1                                                                                                                                                             0 #11
[    0.216066] smp: Brought up 1 node, 12 CPUs
[    0.216073] smpboot: Max logical packages: 3
[    0.216075] smpboot: Total of 12 processors activated (86225.83 BogoMIPS)
[    0.217434] devtmpfs: initialized
[    0.217434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                                                                                                                             x_idle_ns: 1911260446275000 ns
[    0.217434] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.218034] pinctrl core: initialized pinctrl subsystem
[    0.218154] NET: Registered protocol family 16
[    0.218209] audit: initializing netlink subsys (disabled)
[    0.218216] audit: type=2000 audit(1602407509.229:1): state=initialized audit                                                                                                                                                             _enabled=0 res=1
[    0.218216] cpuidle: using governor ladder
[    0.218216] cpuidle: using governor menu
[    0.218216] ACPI: bus type PCI registered
[    0.218216] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.218216] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfb                                                                                                                                                             ffffff] (base 0xf8000000)
[    0.218216] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.218216] PCI: Using configuration type 1 for base access
[    0.219524] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.219524] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.220078] ACPI: Added _OSI(Module Device)
[    0.220080] ACPI: Added _OSI(Processor Device)
[    0.220082] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.220083] ACPI: Added _OSI(Processor Aggregator Device)
[    0.220085] ACPI: Added _OSI(Linux-Dell-Video)
[    0.220087] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.220088] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.227463] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.228431] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.230432] ACPI: Interpreter enabled
[    0.230438] ACPI: (supports S0 S5)
[    0.230439] ACPI: Using IOAPIC for interrupt routing
[    0.230689] PCI: Using host bridge windows from ACPI; if necessary, use "pci=                                                                                                                                                             nocrs" and report a bug
[    0.230968] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.237525] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.237531] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S                                                                                                                                                             egments MSI HPX-Type3]
[    0.237636] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.237734] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeC                                                                                                                                                             apability]
[    0.237744] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 0                                                                                                                                                             0-3f] only partially covers this bridge
[    0.237946] PCI host bridge to bus 0000:00
[    0.237949] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.237951] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.237953] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.237956] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.237958] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win                                                                                                                                                             dow]
[    0.237961] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff win                                                                                                                                                             dow]
[    0.237964] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff win                                                                                                                                                             dow]
[    0.237966] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff win                                                                                                                                                             dow]
[    0.237969] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.237977] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.238061] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[    0.238154] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.238212] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.238251] pci 0000:00:01.3: enabling Extended Tags
[    0.238331] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.238432] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.238501] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.238555] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.238669] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.238776] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.238850] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.238904] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.238937] pci 0000:00:07.1: enabling Extended Tags
[    0.239017] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.239124] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.239179] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.239216] pci 0000:00:08.1: enabling Extended Tags
[    0.239294] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.239430] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.239640] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.239854] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.239897] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.239940] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.239986] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.240044] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.240091] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.240138] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.240180] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.240305] pci 0000:01:00.0: [1022:43d5] type 00 class 0x0c0330
[    0.240328] pci 0000:01:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit]
[    0.240363] pci 0000:01:00.0: enabling Extended Tags
[    0.240408] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.240475] pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601
[    0.240520] pci 0000:01:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff]
[    0.240528] pci 0000:01:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref]
[    0.240534] pci 0000:01:00.1: enabling Extended Tags
[    0.240570] pci 0000:01:00.1: PME# supported from D3hot D3cold
[    0.240624] pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400
[    0.240666] pci 0000:01:00.2: enabling Extended Tags
[    0.240706] pci 0000:01:00.2: PME# supported from D3hot D3cold
[    0.240787] pci 0000:00:01.3: PCI bridge to [bus 01-07]
[    0.240791] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.240794] pci 0000:00:01.3:   bridge window [mem 0xfcc00000-0xfcdfffff]
[    0.240864] pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400
[    0.240911] pci 0000:02:00.0: enabling Extended Tags
[    0.240961] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.241034] pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400
[    0.241083] pci 0000:02:04.0: enabling Extended Tags
[    0.241135] pci 0000:02:04.0: PME# supported from D3hot D3cold
[    0.241202] pci 0000:02:05.0: [1022:43c7] type 01 class 0x060400
[    0.241249] pci 0000:02:05.0: enabling Extended Tags
[    0.241298] pci 0000:02:05.0: PME# supported from D3hot D3cold
[    0.241366] pci 0000:02:06.0: [1022:43c7] type 01 class 0x060400
[    0.241412] pci 0000:02:06.0: enabling Extended Tags
[    0.241461] pci 0000:02:06.0: PME# supported from D3hot D3cold
[    0.241529] pci 0000:02:07.0: [1022:43c7] type 01 class 0x060400
[    0.241575] pci 0000:02:07.0: enabling Extended Tags
[    0.241624] pci 0000:02:07.0: PME# supported from D3hot D3cold
[    0.241704] pci 0000:01:00.2: PCI bridge to [bus 02-07]
[    0.241709] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.241713] pci 0000:01:00.2:   bridge window [mem 0xfcc00000-0xfccfffff]
[    0.241746] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.241789] pci 0000:02:04.0: PCI bridge to [bus 04]
[    0.241828] pci 0000:02:05.0: PCI bridge to [bus 05]
[    0.241871] pci 0000:02:06.0: PCI bridge to [bus 06]
[    0.241933] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[    0.241975] pci 0000:07:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.242011] pci 0000:07:00.0: reg 0x18: [mem 0xfcc04000-0xfcc04fff 64bit]
[    0.242035] pci 0000:07:00.0: reg 0x20: [mem 0xfcc00000-0xfcc03fff 64bit]

@davidb2111 Si besoin je peux peut-être apporter mon aide et ce même si mes compétences sont limitées

Je ne sais pas si tu as vu mais j'avais posté des logs du fichier /var/log/Worg.0.log un peu plus haut, des fois que cela puisse aider !

Par ailleurs je vais tenter de voir ce que ça donne sur mes autres ordinateurs, j'ai plusieurs configs avec CPU et GPU (dédié et IGP) AMD.

@davidb2111 said in [7.0] [x64] Plantage avec GPU RX 570:

Bonsoir @beho et @Nelzebym !

Dans vos PC, avez-vous des cartes intel en plus d'une AMD et nVidia.
De plus, il me faudrait une archive support (cf l'aide dispo ici https://forum.recalbox.com/topic/4054/a-lire-avant-de-poster-merci)

David

Salutations maître développeur,

Pas de carte graphique intel, je tourne sur une plateforme sous AMD Ryzen !
J'aurais aimé créer une archive support mais lorsque je rencontre le problème ça ne fonctionne pas, je vais quand même réessayer dés que j'aurais fini mon transfert, dans encore 3 à 4 heures pour le coup

@Beho T'en fais pas, c'est déjà sympa de vouloir aider même si ça n'aboutit pas à une solution

@Beho En essayant et en te relisant je me suis aperçu que j'avais déjà procédé de la sorte pour l'installation !

@Beho said in [7.0] [x64] Plantage avec GPU RX 570:

@Nelzebym Salut j'ai réussi à résoudre le même problème que toi en laissant Belena Etcher décompresser l'ISO de RB7. En gros tu télécharges, et sans toucher au fichier tu fais ton install. J'espère que ça marchera pour toi, moi tout roule depuis.

Je vais essayer, peut-être que cela pourrait fonctionner

Voilà les logs contenus dans le fichier /var/log/Worg.0.log :

[     8.324] 
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[     8.324] Build Operating System: Linux 5.3.0-64-generic x86_64 
[     8.324] Current Operating System: Linux RECALBOX 5.4.52 #1 SMP PREEMPT Fri Oct 2 10:11:32 CEST 2020 x86_64
[     8.324] Kernel command line: BOOT_IMAGE=/boot/linux label=RECALBOX console=tty1 loglevel=7
[     8.325] Build Date: 02 October 2020  10:00:40AM
[     8.325]  
[     8.325] Current version of pixman: 0.38.4
[     8.325] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     8.325] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     8.325] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct  3 15:00:00 2020
[     8.326] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     8.326] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     8.327] (==) No Layout section.  Using the first Screen section.
[     8.327] (==) No screen section available. Using defaults.
[     8.327] (**) |-->Screen "Default Screen Section" (0)
[     8.327] (**) |   |-->Monitor "<default monitor>"
[     8.327] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     8.327] (==) Automatically adding devices
[     8.327] (==) Automatically enabling devices
[     8.327] (==) Automatically adding GPU devices
[     8.329] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     8.329] (WW) The directory "/usr/share/fonts/X11//TTF/" does not exist.
[     8.329] 	Entry deleted from font path.
[     8.329] (WW) The directory "/usr/share/fonts/X11//OTF/" does not exist.
[     8.329] 	Entry deleted from font path.
[     8.329] (WW) The directory "/usr/share/fonts/X11//Type1/" does not exist.
[     8.329] 	Entry deleted from font path.
[     8.329] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11//100dpi/".
[     8.329] 	Entry deleted from font path.
[     8.329] 	(Run 'mkfontdir' on "/usr/share/fonts/X11//100dpi/").
[     8.329] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11//75dpi/".
[     8.329] 	Entry deleted from font path.
[     8.329] 	(Run 'mkfontdir' on "/usr/share/fonts/X11//75dpi/").
[     8.329] (==) FontPath set to:
	/usr/share/fonts/X11//misc/
[     8.329] (==) ModulePath set to "/usr/lib/xorg/modules"
[     8.329] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     8.329] (II) Loader magic: 0x614c20
[     8.329] (II) Module ABI versions:
[     8.329] 	X.Org ANSI C Emulation: 0.4
[     8.329] 	X.Org Video Driver: 24.1
[     8.329] 	X.Org XInput driver : 24.1
[     8.329] 	X.Org Server Extension : 10.0
[     8.329] (II) xfree86: Adding drm device (/dev/dri/card0)
[     8.335] (--) PCI:*(8@0:0:0) 1002:67df:174b:353e rev 239, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfcf00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[     8.335] (II) Open ACPI successful (/var/run/acpid.socket)
[     8.335] (II) LoadModule: "glx"
[     8.336] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     8.338] (II) Module glx: vendor="X.Org Foundation"
[     8.338] 	compiled for 1.20.8, module version = 1.0.0
[     8.338] 	ABI class: X.Org Server Extension, version 10.0
[     8.338] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[     8.338] 	loading driver: amdgpu
[     8.338] (==) Matched amdgpu as autoconfigured driver 0
[     8.338] (==) Matched ati as autoconfigured driver 1
[     8.338] (==) Matched modesetting as autoconfigured driver 2
[     8.338] (==) Matched fbdev as autoconfigured driver 3
[     8.338] (==) Matched vesa as autoconfigured driver 4
[     8.338] (==) Assigned the driver to the xf86ConfigLayout
[     8.338] (II) LoadModule: "amdgpu"
[     8.338] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[     8.339] (II) Module amdgpu: vendor="X.Org Foundation"
[     8.339] 	compiled for 1.20.8, module version = 19.1.0
[     8.339] 	Module class: X.Org Video Driver
[     8.339] 	ABI class: X.Org Video Driver, version 24.1
[     8.339] (II) LoadModule: "ati"
[     8.339] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[     8.340] (II) Module ati: vendor="X.Org Foundation"
[     8.340] 	compiled for 1.20.8, module version = 19.1.0
[     8.340] 	Module class: X.Org Video Driver
[     8.340] 	ABI class: X.Org Video Driver, version 24.1
[     8.349] (II) LoadModule: "modesetting"
[     8.349] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     8.350] (II) Module modesetting: vendor="X.Org Foundation"
[     8.350] 	compiled for 1.20.8, module version = 1.20.8
[     8.350] 	Module class: X.Org Video Driver
[     8.350] 	ABI class: X.Org Video Driver, version 24.1
[     8.350] (II) LoadModule: "fbdev"
[     8.350] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     8.351] (II) Module fbdev: vendor="X.Org Foundation"
[     8.351] 	compiled for 1.20.8, module version = 0.5.0
[     8.351] 	Module class: X.Org Video Driver
[     8.351] 	ABI class: X.Org Video Driver, version 24.1
[     8.351] (II) LoadModule: "vesa"
[     8.351] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     8.351] (II) Module vesa: vendor="X.Org Foundation"
[     8.351] 	compiled for 1.20.8, module version = 2.4.0
[     8.351] 	Module class: X.Org Video Driver
[     8.351] 	ABI class: X.Org Video Driver, version 24.1
[     8.351] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[     8.351] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     8.351] (II) FBDEV: driver for framebuffer: fbdev
[     8.351] (II) VESA: driver for VESA chipsets: vesa
[     8.351] (--) using VT number 2

[     8.376] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[     8.377] (WW) Falling back to old probe method for modesetting
[     8.377] (WW) Falling back to old probe method for fbdev
[     8.377] (II) Loading sub module "fbdevhw"
[     8.377] (II) LoadModule: "fbdevhw"
[     8.378] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     8.378] (II) Module fbdevhw: vendor="X.Org Foundation"
[     8.378] 	compiled for 1.20.8, module version = 0.0.2
[     8.378] 	ABI class: X.Org Video Driver, version 24.1
[     8.378] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     8.379] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[     8.379] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     8.379] (==) AMDGPU(0): Default visual is TrueColor
[     8.379] (==) AMDGPU(0): RGB weight 888
[     8.379] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[     8.379] (--) AMDGPU(0): Chipset: "Radeon RX 570 Series" (ChipID = 0x67df)
[     8.379] (II) Loading sub module "fb"
[     8.379] (II) LoadModule: "fb"
[     8.379] (II) Loading /usr/lib/xorg/modules/libfb.so
[     8.379] (II) Module fb: vendor="X.Org Foundation"
[     8.379] 	compiled for 1.20.8, module version = 1.0.0
[     8.379] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.379] (II) Loading sub module "dri2"
[     8.379] (II) LoadModule: "dri2"
[     8.379] (II) Module "dri2" already built-in
[     8.568] (II) Loading sub module "glamoregl"
[     8.568] (II) LoadModule: "glamoregl"
[     8.568] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     8.574] (II) Module glamoregl: vendor="X.Org Foundation"
[     8.574] 	compiled for 1.20.8, module version = 1.0.1
[     8.574] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.619] (EE) AMDGPU(0): eglGetDisplay() failed
[     8.619] (EE) AMDGPU(0): glamor detected, failed to initialize EGL.
[     8.619] (WW) AMDGPU(0): amdgpu_glamor_pre_init returned FALSE, using ShadowFB
[     8.619] (II) Loading sub module "shadow"
[     8.619] (II) LoadModule: "shadow"
[     8.619] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     8.619] (II) Module shadow: vendor="X.Org Foundation"
[     8.619] 	compiled for 1.20.8, module version = 1.1.0
[     8.619] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.619] (II) AMDGPU(0): KMS Pageflipping: enabled
[     8.619] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[     8.619] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[     8.619] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[     8.620] (II) AMDGPU(0): Output HDMI-A-1 has no monitor section
[     8.620] (II) AMDGPU(0): Output DVI-D-0 has no monitor section
[     8.632] (II) AMDGPU(0): EDID for output DisplayPort-0
[     8.633] (II) AMDGPU(0): EDID for output DisplayPort-1
[     8.633] (II) AMDGPU(0): EDID for output HDMI-A-0
[     8.633] (II) AMDGPU(0): EDID for output HDMI-A-1
[     8.633] (II) AMDGPU(0): Manufacturer: VES  Model: 3700  Serial#: 0
[     8.633] (II) AMDGPU(0): Year: 2019  Week: 1
[     8.633] (II) AMDGPU(0): EDID Version: 1.3
[     8.633] (II) AMDGPU(0): Digital Display Input
[     8.633] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 127  vert.: 72
[     8.633] (II) AMDGPU(0): Gamma: 2.20
[     8.633] (II) AMDGPU(0): No DPMS capabilities specified
[     8.633] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     8.633] (II) AMDGPU(0): First detailed timing is preferred mode
[     8.633] (II) AMDGPU(0): redX: 0.640 redY: 0.340   greenX: 0.300 greenY: 0.690
[     8.633] (II) AMDGPU(0): blueX: 0.138 blueY: 0.038   whiteX: 0.282 whiteY: 0.297
[     8.633] (II) AMDGPU(0): Supported established timings:
[     8.633] (II) AMDGPU(0): 720x400@70Hz
[     8.633] (II) AMDGPU(0): 640x480@60Hz
[     8.633] (II) AMDGPU(0): 640x480@72Hz
[     8.633] (II) AMDGPU(0): 640x480@75Hz
[     8.633] (II) AMDGPU(0): 800x600@56Hz
[     8.633] (II) AMDGPU(0): 800x600@60Hz
[     8.633] (II) AMDGPU(0): 800x600@72Hz
[     8.633] (II) AMDGPU(0): 800x600@75Hz
[     8.633] (II) AMDGPU(0): 832x624@75Hz
[     8.633] (II) AMDGPU(0): 1024x768@60Hz
[     8.633] (II) AMDGPU(0): 1024x768@70Hz
[     8.633] (II) AMDGPU(0): 1024x768@75Hz
[     8.633] (II) AMDGPU(0): 1280x1024@75Hz
[     8.633] (II) AMDGPU(0): 1152x864@75Hz
[     8.633] (II) AMDGPU(0): Manufacturer's mask: 0
[     8.633] (II) AMDGPU(0): Supported standard timings:
[     8.633] (II) AMDGPU(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[     8.633] (II) AMDGPU(0): #1: hsize: 1440  vsize 900  refresh: 60  vid: 149
[     8.633] (II) AMDGPU(0): #2: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[     8.633] (II) AMDGPU(0): #3: hsize: 1400  vsize 1050  refresh: 60  vid: 16528
[     8.633] (II) AMDGPU(0): #4: hsize: 1280  vsize 800  refresh: 60  vid: 129
[     8.633] (II) AMDGPU(0): #5: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     8.633] (II) AMDGPU(0): #6: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[     8.633] (II) AMDGPU(0): Supported detailed timing:
[     8.633] (II) AMDGPU(0): clock: 594.0 MHz   Image Size:  1872 x 1053 mm
[     8.633] (II) AMDGPU(0): h_active: 3840  h_sync: 4016  h_sync_end 4104 h_blank_end 4400 h_border: 0
[     8.633] (II) AMDGPU(0): v_active: 2160  v_sync: 2168  v_sync_end 2178 v_blanking: 2250 v_border: 0
[     8.633] (II) AMDGPU(0): Supported detailed timing:
[     8.633] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  1872 x 1053 mm
[     8.633] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[     8.633] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[     8.633] (II) AMDGPU(0): Monitor name: 58UHD_LCD_TV
[     8.633] (II) AMDGPU(0): Ranges: V min: 48 V max: 62 Hz, H min: 15 H max: 70 kHz, PixClock max 605 MHz
[     8.633] (II) AMDGPU(0): Supported detailed timing:
[     8.633] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  1280 x 720 mm
[     8.633] (II) AMDGPU(0): h_active: 1920  h_sync: 2558  h_sync_end 2602 h_blank_end 2750 h_border: 0
[     8.633] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[     8.633] (II) AMDGPU(0): Supported detailed timing:
[     8.633] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  1280 x 720 mm
[     8.633] (II) AMDGPU(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[     8.633] (II) AMDGPU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 585 v_border: 0
[     8.633] (II) AMDGPU(0): Number of EDID sections to follow: 1
[     8.633] (II) AMDGPU(0): EDID (in hex):
[     8.633] (II) AMDGPU(0): 	00ffffffffffff0058b3003700000000
[     8.633] (II) AMDGPU(0): 	011d0103807f48780acf74a3574cb023
[     8.633] (II) AMDGPU(0): 	09484cafef80b3009500a94090408100
[     8.633] (II) AMDGPU(0): 	81808140010108e80030f2705a80b058
[     8.633] (II) AMDGPU(0): 	8a00501d7400001e023a801871382d40
[     8.633] (II) AMDGPU(0): 	582c4500501d7400001e000000fc0035
[     8.633] (II) AMDGPU(0): 	385548445f4c43445f54560a000000fd
[     8.633] (II) AMDGPU(0): 	00303e0f463c000a2020202020200187
[     8.633] (II) AMDGPU(0): 	020344f15c60619f1004130514030201
[     8.633] (II) AMDGPU(0): 	1112202122151606075d5e5f65666263
[     8.633] (II) AMDGPU(0): 	6429090707150750570600830100006e
[     8.633] (II) AMDGPU(0): 	030c002000b83c20008004030201e50f
[     8.633] (II) AMDGPU(0): 	03008001011d803e73382d407e2c4580
[     8.633] (II) AMDGPU(0): 	00d05200001e011d80d0721c2d20102c
[     8.633] (II) AMDGPU(0): 	258000d05200009e0000000000000000
[     8.633] (II) AMDGPU(0): 	0000000000000000000000000000002b
[     8.633] (--) AMDGPU(0): HDMI max TMDS frequency 300000KHz
[     8.633] (II) AMDGPU(0): Printing probed modes for output HDMI-A-1
[     8.633] (II) AMDGPU(0): Modeline "3840x2160"x60.0  594.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (135.0 kHz eP)
[     8.633] (II) AMDGPU(0): Modeline "4096x2160"x60.0  594.00  4096 4184 4272 4400  2160 2168 2178 2250 +hsync +vsync (135.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "4096x2160"x50.0  594.00  4096 5064 5152 5280  2160 2168 2178 2250 +hsync +vsync (112.5 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "4096x2160"x59.9  593.41  4096 4184 4272 4400  2160 2168 2178 2250 +hsync +vsync (134.9 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "4096x2160"x30.0  297.00  4096 4184 4272 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "4096x2160"x25.0  297.00  4096 5064 5152 5280  2160 2168 2178 2250 +hsync +vsync (56.2 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "4096x2160"x24.0  297.00  4096 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "4096x2160"x30.0  296.70  4096 4184 4272 4400  2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "4096x2160"x24.0  296.70  4096 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "3840x2160"x50.0  594.00  3840 4896 4984 5280  2160 2168 2178 2250 +hsync +vsync (112.5 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "3840x2160"x59.9  593.41  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (134.9 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "3840x2160"x30.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "3840x2160"x25.0  297.00  3840 4896 4984 5280  2160 2168 2178 2250 +hsync +vsync (56.2 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "3840x2160"x24.0  297.00  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "3840x2160"x30.0  296.70  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "3840x2160"x24.0  296.70  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1920x1200"x60.0  594.00  1920 4016 4104 4400  1200 2168 2178 2250 +hsync +vsync (135.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1400x1050"x59.9  101.00  1400 1448 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     8.633] (II) AMDGPU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[     8.634] (II) AMDGPU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     8.634] (II) AMDGPU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     8.634] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     8.634] (II) AMDGPU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     8.634] (II) AMDGPU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     8.634] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     8.634] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     8.634] (II) AMDGPU(0): EDID for output DVI-D-0
[     8.634] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[     8.634] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[     8.634] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[     8.634] (II) AMDGPU(0): Output HDMI-A-1 connected
[     8.634] (II) AMDGPU(0): Output DVI-D-0 disconnected
[     8.634] (II) AMDGPU(0): Using exact sizes for initial modes
[     8.634] (II) AMDGPU(0): Output HDMI-A-1 using initial mode 3840x2160 +0+0
[     8.634] (II) AMDGPU(0): mem size init: gart size :1ff972000 vram size: s:1fdb2c000 visible:db2c000
[     8.634] (==) AMDGPU(0): DPI set to (96, 96)
[     8.634] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[     8.634] (II) Loading sub module "ramdac"
[     8.634] (II) LoadModule: "ramdac"
[     8.634] (II) Module "ramdac" already built-in
[     8.634] (II) UnloadModule: "modesetting"
[     8.634] (II) Unloading modesetting
[     8.634] (II) UnloadModule: "fbdev"
[     8.634] (II) Unloading fbdev
[     8.634] (II) UnloadSubModule: "fbdevhw"
[     8.634] (II) Unloading fbdevhw
[     8.634] (II) UnloadModule: "vesa"
[     8.634] (II) Unloading vesa
[     8.634] (II) AMDGPU(0): Front buffer pitch: 15360 bytes
[     8.635] (==) AMDGPU(0): DRI3 disabled
[     8.635] (==) AMDGPU(0): Backing store enabled
[     8.635] (WW) AMDGPU(0): Direct rendering disabled
[     8.635] (II) AMDGPU(0): 2D and 3D acceleration disabled
[     8.635] (==) AMDGPU(0): DPMS enabled
[     8.635] (==) AMDGPU(0): Silken mouse enabled
[     8.650] (II) Initializing extension Generic Event Extension
[     8.650] (II) Initializing extension SHAPE
[     8.650] (II) Initializing extension MIT-SHM
[     8.650] (II) Initializing extension XInputExtension
[     8.650] (II) Initializing extension XTEST
[     8.650] (II) Initializing extension BIG-REQUESTS
[     8.650] (II) Initializing extension SYNC
[     8.650] (II) Initializing extension XKEYBOARD
[     8.650] (II) Initializing extension XC-MISC
[     8.650] (II) Initializing extension XFIXES
[     8.650] (II) Initializing extension RENDER
[     8.650] (II) Initializing extension RANDR
[     8.650] (II) Initializing extension COMPOSITE
[     8.650] (II) Initializing extension DAMAGE
[     8.650] (II) Initializing extension MIT-SCREEN-SAVER
[     8.650] (II) Initializing extension DOUBLE-BUFFER
[     8.650] (II) Initializing extension RECORD
[     8.650] (II) Initializing extension DPMS
[     8.650] (II) Initializing extension Present
[     8.650] (II) Initializing extension DRI3
[     8.650] (II) Initializing extension X-Resource
[     8.650] (II) Initializing extension XVideo
[     8.650] (II) Initializing extension XVideo-MotionCompensation
[     8.650] (II) Initializing extension GLX
[     8.650] (II) AIGLX: Screen 0 is not DRI2 capable
[     8.660] (II) IGLX: Loaded and initialized swrast
[     8.660] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     8.660] (II) Initializing extension XFree86-VidModeExtension
[     8.660] (II) Initializing extension XFree86-DGA
[     8.660] (II) Initializing extension XFree86-DRI
[     8.660] (II) Initializing extension DRI2
[     8.661] (II) AMDGPU(0): Setting screen physical size to 1016 x 571
[     8.670] (EE) 
[     8.670] (EE) Backtrace:
[     8.671] (EE) 0: /usr/bin/X (xorg_backtrace+0x40) [0x587710]
[     8.671] (EE) 1: /usr/bin/X (0x400000+0x18b089) [0x58b089]
[     8.671] (EE) 2: /lib64/libpthread.so.0 (0x7efd8dca0000+0x13100) [0x7efd8dcb3100]
[     8.671] (EE) 3: /lib64/libc.so.6 (gsignal+0xca) [0x7efd8db1ab8a]
[     8.671] (EE) 4: /lib64/libc.so.6 (abort+0x165) [0x7efd8db1bc35]
[     8.671] (EE) 5: /lib64/libc.so.6 (0x7efd8dae4000+0x2f72a) [0x7efd8db1372a]
[     8.671] (EE) 6: /lib64/libc.so.6 (0x7efd8dae4000+0x2f7a2) [0x7efd8db137a2]
[     8.671] (EE) 7: /usr/lib/xorg/modules/drivers/amdgpu_drv.so (0x7efd8d0b5000+0x8333) [0x7efd8d0bd333]
[     8.671] (EE) 8: /usr/lib/xorg/modules/drivers/amdgpu_drv.so (0x7efd8d0b5000+0x9986) [0x7efd8d0be986]
[     8.671] (EE) 9: /usr/lib/xorg/modules/drivers/amdgpu_drv.so (0x7efd8d0b5000+0x1aa68) [0x7efd8d0cfa68]
[     8.671] (EE) 10: /usr/lib/xorg/modules/drivers/amdgpu_drv.so (0x7efd8d0b5000+0x1e58b) [0x7efd8d0d358b]
[     8.671] (EE) 11: /usr/bin/X (MapWindow+0xec) [0x46a13c]
[     8.671] (EE) 12: /usr/bin/X (0x400000+0x43ef1) [0x443ef1]
[     8.671] (EE) 13: /lib64/libc.so.6 (__libc_start_main+0xe7) [0x7efd8db06b77]
[     8.671] (EE) 14: /usr/bin/X (_start+0x2a) [0x42ebda]
[     8.671] (EE) 
[     8.671] (EE) 
Fatal server error:
[     8.671] (EE) Caught signal 6 (Aborted). Server aborting
[     8.671] (EE) 
[     8.671] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[     8.671] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[     8.671] (EE) 
[     8.742] (EE) Server terminated with error (1). Closing log file.

Bonsoir,

J'ai pu essayer la dernière version de recalbox et franchement c'est énorme ce que vous avez fait, merci à tous !

Avec ma 750 Ti tout marche plutôt bien, le système se lance et jusqu'à présent pas de soucis. Tout content d'apprendre que la 7.0 permet d'utiliser les dernières AMD j'ai installé une RX 570 que j'avais réservé pour cet instant et là malheureusement en pleine vidéo de lancement du système retour à cet écran texte !

Désolé de déjà vous donner du travail dés la sortie de cette nouvelle version !

J'ai trouvé une solution pour le paramètre "hide overlay in menu", si quelqu'un rencontre le même problème il suffit d'aller dans \share\system\configs\retroarch et ouvrir le fichier common.cfg et remplacer input_overlay_hide_in_menu = "false" par input_overlay_hide_in_menu = "true" !

Bonjour,

J'ai toutes les dix minutes mon écran qui devient noir (le son continue) et je dois à chaque fois utiliser le pad de mon clavier portable pour retrouver l'affichage et ce en plein jeu ou dans les menus de retroarch alors que l'option "Suspend Screensaver" est bien sur On.

Ensuite j'ai aussi un petit soucis c'est que j'ai modifié le paramètre "Hide Overlay In Menu" mais à chaque redémarrage le paramètre est désactivé et ce même en ayant désactivé "Save Configuration on Exit".

Quelques idées ?
Merci d'avance

@Bkg2k Très bonne nouvelle concernant les drivers Nvidia ! Mais qu'en est-il pour ceux des cartes AMD ?