Posts made by krlitosmtnez

@voljega yes! Tell me if I'm wrong, but system says 18.07.13.

Yeah!! Finally it's works!!!

Solution: My problem was the pins at IPAC2. I used 1A, 1B, 2A and 2B pins at the IPAC2. Changed to other switches avaiable and problem solved.

Also, IPAC2 reset at default presets and create the empty file from SSH.

Thanks!

@voljega Hi! Thanks for your response. Yes, I tried Keyboard mode with default keys.

Let me try again, I will put the configs and the results...

Ok, some improvements here,

I configurated IPAC2 with gamepad controls using Winipac App. I change A and B Buttons to another pins (Switch 7 and and now the system finded the clicks.

The problem is that the config isn't saved to the system. I completed the config for Gamepad 1 and Gamepad 2, but when I reboot, only Gamepad 2 is working, and now Gamepad 1 is not avaiable.

Now, this is the situation:

cd /dev/input/by-id/

usb-Apple__Inc_Apple_Keyboard-event-if01
usb-Apple__Inc_Apple_Keyboard-event-kbd
usb-Ultimarc_I-PAC_2_6-event-kbd
usb-Ultimarc_I-PAC_2_6-if01-event-mouse
usb-Ultimarc_I-PAC_2_6-if01-mouse
usb-Ultimarc_I-PAC_2_6-if02-event-joystick
usb-Ultimarc_I-PAC_2_6-if02-joystick
usb-Ultimarc_I-PAC_2_6-if03-event-joystick
usb-Ultimarc_I-PAC_2_6-if03-joystick

evtest says

/dev/input/event0: Ultimarc I-PAC 2
/dev/input/event1: Ultimarc I-PAC 2
/dev/input/event2: Ultimarc I-PAC 2
/dev/input/event3: Ultimarc I-PAC 2
/dev/input/event4: Apple, Inc Apple Keyboard
/dev/input/event5: Apple, Inc Apple Keyboard
/dev/input/event6: Xarcade-to-Gamepad Device 1
/dev/input/event7: Xarcade-to-Gamepad Device 2
/dev/input/event8: SNES-to-Keyboard Device

event2 >> Player 1, but this device is giving the error " This device is grabbed by another process." MAYBE IS THIS THE PROBLEM?
event3 >> Player 2

I tried to create 2 empty files, but doesn't work.

Any ideas?

Thanks!

Hi!

My recalbox is not working with I-PAC2. I followed the instructions with this guide, but I can't finish the process with good results.

https://github.com/recalbox/recalbox-os/wiki/keyboard-encoder-configuration-(EN)

I have two players configuration with 6 buttons + Select and Start for each other.

First case: (IPAC with Firmware 1.49 (no gamepads)

*/dev/input/by-id/

usb-Apple__Inc_Apple_Keyboard-event-if01
usb-Apple__Inc_Apple_Keyboard-event-kbd
usb-Ultimarc_IPAC_2_Ultimarc_IPAC_2_8-event-if02
usb-Ultimarc_IPAC_2_Ultimarc_IPAC_2_8-event-kbd
usb-Ultimarc_IPAC_2_Ultimarc_IPAC_2_8-if01-event-mouse
usb-Ultimarc_IPAC_2_Ultimarc_IPAC_2_8-if01-mouse*

evtest says:

No device specified, trying to scan all of /dev/input/event
Available devices:
/dev/input/event0: Ultimarc IPAC 2 Ultimarc IPAC 2
/dev/input/event1: Ultimarc IPAC 2 Ultimarc IPAC 2
/dev/input/event2: Ultimarc IPAC 2 Ultimarc IPAC 2
/dev/input/event3: Apple, Inc Apple Keyboard
/dev/input/event4: Apple, Inc Apple Keyboard*

event0 gived to me the good results.

cd /recalbox/share_init/system/configs/xarcade2jstick/
ls
mount -o remount,rw /
touch /recalbox/share_init/system/configs/xarcade2jstick/usb-Ultimarc_IPAC_2_Ultimarc_IPAC_2_8-event-if02

Results:

Recalbox found the keys, but not allow to save the keys for Player 2. The system says "Keyboard detected" at the gamepad configuration, so the final result is a new config for Player 1.

Second case: (IPAC with Firmware 1.39 (with gamepads enabled)

Same process with diferent results. System detects ULTIMATE-IPAC 2 #1 and Ultimate IPAC 2 #2, but buttons A and B can't finded in both players.

Any thoughts?

Thanks!

¡Hola! ¿Conseguiste solucionarlo? Estoy con los mismo problemas y no hay manera