Recalbox Forum

    • Register
    • Login
    • Search
    • Recent
    • Tags
    • recalbox.com
    • Gitlab repository
    • Documentation
    • Discord
    1. Home
    2. Kairoslair 0
    3. Posts
    • Profile
    • Following 0
    • Followers 0
    • Topics 0
    • Posts 1
    • Best 1
    • Controversial 0
    • Groups 0

    Posts made by Kairoslair 0

    • RE: Probleme affichage ogst odroid n64 case (Odroid xu4)

      I've been having the same issues as manitou and cedric, and using david's boot.ini also did not work. But, I mixed a bit of david's boot.ini with the original (leaving some things out also) and now it works! Here is my boot.ini, if it will maybe help someone:

      ODROIDXU-UBOOT-CONFIG
      
      # U-Boot Parameters (DO NOT MODIFY)
      setenv version 4.14 
      setenv zimage boot/linux
      setenv fdtbin boot/exynos5422-odroidxu4.dtb
      setenv uInitrd boot/uInitrd
      
      # --- Screen Configuration for HDMI --- # 
      # ---------------------------------------
      # Uncomment only ONE line! Leave all commented for automatic selection.
      # Uncomment only the setenv line!
      # ---------------------------------------
      # ODROID-VU forced resolution
      # setenv videoconfig "video=HDMI-A-1:1280x800@60"
      # -----------------------------------------------
      # ODROID-VU forced EDID
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin"
      # -----------------------------------------------
      # 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
      setenv videoconfig "video=HDMI-A-1:1920x1080@60"
      # -----------------------------------------------
      # 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
      # -----------------------------------------------
      # 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)
      # setenv videoconfig "video=HDMI-A-1:1920x1080@50"
      # -----------------------------------------------
      # 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"
      # -----------------------------------------------
      # 1440x900 with monitor provided EDID information.
      # setenv videoconfig "video=HDMI-A-1:1440x900@60"
      # -----------------------------------------------
      # 1440x900 without monitor data using generic information 
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin"
      # -----------------------------------------------
      # 1280x1024 without monitor data using generic information
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin"
      # -----------------------------------------------
      # 1280x720 (720P) with monitor provided EDID information. (720p-edid)
      # setenv videoconfig "video=HDMI-A-1:1280x720@60"
      # -----------------------------------------------
      # 1280x720 (720P) without monitor data using generic information (720p-noedid)
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"
      # -----------------------------------------------
      # 1024x768 without monitor data using generic information
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"
      # -----------------------------------------------
      # 1024x600 without monitor data using generic information (ODROID VU7+)
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin"
      # -----------------------------------------------
      # 800x600 without monitor data using generic information 
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin"
      # -----------------------------------------------
      # 800x480 without monitor data using generic information (ODROID 7")
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin"
      # -----------------------------------------------
      # 720x576 without monitor data using generic information 
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"
      # -----------------------------------------------
      # 720x480 without monitor data using generic information 
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"
      # -----------------------------------------------
      # 640x480 without monitor data using generic information
      # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"
      
      
      # --- HDMI / DVI Mode Selection ---
      # ------------------------------------------
      # - HDMI Mode
      setenv vout "hdmi"
      # - DVI Mode (disables sound over HDMI as per DVI compat)
      # setenv vout "dvi"
      
      
      # --- CPU Governor Setup ---
      # Uncomment only one line. New governor is set after 90secs after boot.
      # ------------------------------------------
      # - Performance (Keep all the CPU's at Maximum frequency)
      setenv governor "performance"
      # ------------------------------------------
      # - Ondemand
      # setenv governor "ondemand"
      # ------------------------------------------
      # - Interactive (Pretty much just like ondemand with more possible customization via sysfs.)
      # setenv governor "interactive"
      # ------------------------------------------
      # - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications)
      # setenv governor "conservative"
      # ------------------------------------------
      # - Powersave (Keeps the CPU's to the lowest possible temps)
      # setenv governor "powersave"
      
      
      # --- HDMI CEC Configuration ---
      # ------------------------------------------
      setenv cecenable "false" # false or true
      # set to true to enable HDMI CEC
      
      #------------------------------------------------------------------------------
      #
      # HDMI Hot Plug detection
      #
      #------------------------------------------------------------------------------
      #
      # Forces the HDMI subsystem to ignore the check if the cable is connected or 
      # not.
      # false : disable the detection and force it as connected.
      # true : let cable, board and monitor decide the connection status.
      # 
      # default: true
      # 
      #------------------------------------------------------------------------------
      setenv HPD "false"
      setenv hdmi_phy_control "HPD=${HPD}  vout=${vout}"
      if test "${cecenable}" = "false"; then fdt rm /soc/cec@101B0000; fi 
      setenv dtb_addr_r "0x44000000"
      setenv dtbo_addr_r "0x48000000"
      setenv zimage_addr_r 0x40008000
      setenv uInitrd_addr_r 0x42000000
      setenv fdtbin_addr_r 0x44000000
      setenv config_addr_r "0x4B000000"
      
      setenv fdt_high "0xffffffff"
      
      # load config.ini
      load mmc 0:1 ${config_addr_r} config.ini \
          && ini generic ${config_addr_r}
      
      # DRAM Frequency (lpddr3 available frequency list - 933/825/728/633)
      setenv ddr_freq 933
      
      # set DDR frequency
      dmc ${ddr_freq}
      
      # Default boot arguments
      setenv bootrootfs "label=RECALBOX"
      setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0"
      
      # boot commands
      fatload mmc 0:1 ${zimage_addr_r} ${zimage}
      fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd}
      fatload mmc 0:1 ${fdtbin_addr_r} ${fdtbin}
      
      fdt addr ${dtb_addr_r}
      if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
      
      setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}"
      
      # load overlays from config.ini
      if test "x${overlay_profile}" != "x"; then
          ini overlay_${overlay_profile} ${config_addr_r}
      fi
      
      if test "x{overlays}" != "x"; then
          fdt resize ${overlay_resize}
          for overlay in ${overlays}; do
              load mmc 0:1 ${dtbo_addr_r} overlays/${overlay}.dtbo \
                  && fdt apply ${dtbo_addr_r}
          done
      fi
      
      bootz ${zimage_addr_r} ${uInitrd_addr_r} ${fdtbin_addr_r}
      
      posted in Recalbox Général
      Kairoslair 0
      Kairoslair 0