@acris @lackyluuk @Substring
Sorry for the late answer guys.
After rewiring the whole thing again 2 times, it finally works.
As I already reconfigured it a several times before, I really don't know, what I did wrong.
Thank you for your patience and your help, I'd have given up without you.
@lackyluuk
Thanks!
@Substring
Here's the support archive.
@Substring
What is a support archive?
@Substring @lackyluuk
Had few time the last week, but finally managed to try it this way. Didn't work.
When I run the commands and restart Recalbox, the Joystick doesn't work and as soon as I hit one of the buttons, a window pops up: "configure input. 2 Gamepads detected". As soon as I try to configure, I get the same problem as befor: everything works fine, I can configure the arrow keys, abxy and start, as soon as i get to the select-button. Can't configure select or any of the following buttons.
So I finally gave up and completely reinstalled Recalbox. Didn't help. Same issues.
In my desperation I just hit any buttons while configuring and found out something: the select button (the one I want to be the select button in my build) works fine when I try to configure it as any other button. As well, the other buttons, that didn't work befor, can be configured as any of the arrow, abxy or the start button. But again, as soon as it gets to configure the select button in recalbox, nothing works.
So finally I guess, the problem isn't any of the hardware-buttons, but recalbox just lets me configure up to 9 buttons and not 12 buttons, as it should be.
Sorry for my pour english, I hope I can make you understand, what I mean.
@Substring
Well, then the problem might be that i did reconfigure it?
As there seems no solution for the problem, i will try to reinstall Recalbox.
@lackyluuk
Your're right, sorry. Checked again, installed version is 4.0.2
@Substring
2 Xin-mo pads are showed up, event 0 and event 1.
I tried with the inputs for player one.
@lackyluuk
It worked. Great.
Thank you!
This are the mapped buttons:
btn_base - Hotkey
btn_base3 - select
btn_base4 - start
btn_Pinkie - L1
btn_Top2 - R1
btn_Thumb2 - A
btn_ Thumb - B
btn_Top - X
btn_Trigger - Y
The Joystick worked as well.
This is what I've got.
@Substring
Now I'm back home and firstly detached and reattached all the wiring, again, following the instruction in the link above.
Same problem as bevor.
I'd like tu run evtest, but unfortunately I couldn't find a useful tutorial, how to do this. I think I have to use Putty or something else, but I don't know the commands I have to use.
I already proofed the wiring two times and couldn't find anything.
Unfortunately I'm not home til Sunday to run evtest, but I will do this as soon as I am back.
Many thanks in advance!
@Substring
When I try to configure the controls within the Emulationstation menu, I can configure the arrow-buttons, abxy and start, but then, when it comes to the select button and the following ones, they are just not recognized. Not on player one, or on player two.
The outcome is, that i can't use the select button, L1 and R1 aswell as the hotkey.
When I use a wired Xbox 360 controller, everything works fine.
@Substring
Of course. Sorry, I thought I wrote it on the German forum.
I just finished my bartop-arcade project- everything is working fine so far. However i wanted to install the controls and following problem came up: the directions up, down, left and right as well as buttons A,B,XY work without any problems. Even the start button is fine and they all function in the games (SNES). After pressing the select button though, nothing works. I can't set it up or use the L1, R1 or the hotkey.
There are 1 joystick, 6 buttons, 1 start key and 1 select key per Player (2) and 1 hotkey in total. I've connected everything as said in this instruction manual.
I've searched the internet far and wide but haven't found the solution.
Maybe i'm lucky in this forum and someone here can help me!
Many thanks!
Hallo,
ich bin soeben mit meinem Bartop-Arcade Projekt fertig geworden und soweit funktioniert auch alles.
Allerdings wollte ich dann die Controllerbelegung einrichten und stehe hier vor folgendem Problem:
Richtungen oben, unten, links, rechts lassen sich problemlos einrichten
Knöpfe A, B, X, Y lassen sich problemlos einrichten
Start Knopf lässt sich problemlos einrichten
Das funktioniert auch alles in Spielen (zumindest beim SNES).
Aber ab dem Select Knopf geht nichts mehr. Ich kann weder ihn einrichten, noch L1 und R1 oder den Hotkey.
Ich habe pro Spieler (2 sinds) 1 Joystick, 6 Knöpfe, 1x Start, 1x Select und insgesamt einen Hotkey. Angeschlossen habe ich alles wie hier beschrieben.
Ich habe schon das halbe Internet abgesucht, aber bisher keine Lösung gefunden.
Vielleicht könnt ihr mir ja weiter helfen.
LG hansi