Hello. Does anyone has such the same problem with lags on Twitch Kodi plugin? I use 480p and it is still lagging.

By the way, where can i find Kodi User plugin folder?

regards

After reinstalling recalbox, i have noticed that internet is working fine only when I use dhcp. With static IP-address i can ping anything I want, but in EmulationStation or Kodi connection does not exist.

UPD: Adapter is working fine.

@subs said in My TP-Link TL-WN722N doesn`t work.:

1st : know that lan and wifi can't work at the same time

This is the solution of my problem that I have with ssh. I tried to assign the same static IP-address eth0 and wlan0 at the same time

Anyway, i can not connect to internet. And I don`t know why that happens.

ifconfig wlan0

wlan0 Link encap:Ethernet HWaddr F8:1A:67:1B:26:0A
inet addr:192.168.100.14 Bcast:0.0.0.0 Mask:255.255.255.0
inet6 addr: fe80::fa1a:67ff:fe1b:260a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:17425 errors:0 dropped:0 overruns:0 frame:0
TX packets:14583 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21748738 (20.7 MiB) TX bytes:1418608 (1.3 MiB)

I tried to ping Google DNS:

ping 8.8.8.8

PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: seq=0 ttl=46 time=41.627 ms
64 bytes from 8.8.8.8: seq=1 ttl=46 time=40.581 ms
64 bytes from 8.8.8.8: seq=2 ttl=46 time=39.053 ms
64 bytes from 8.8.8.8: seq=3 ttl=46 time=39.160 ms
64 bytes from 8.8.8.8: seq=4 ttl=46 time=38.874 ms
^C
--- 8.8.8.8 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 38.874/39.859/41.627 ms

In EmulationStation/Network Settings i can see that Wi-Fi is working on, but Status is NOT CONNECTED.

By the way, data transfer rate through WinSCP is terrible. About 21 kb/s.

Any ideas to help me with internet connection?
Thanks for your patience

@subs Yes, this works fine. I just need to click Wi-Fi On in EmulationStation and it is works fine.

Firmware that i use is still htc_9271.fw.

But, there is another problem: i can not connect via ssh to my recalbox and i have no idea why it is not working now. Wi-Fi is on, i see my recalbox in ip device list. But, when i try to connect - connection timed out.

UPD: In Network settings I see NOT CONNECTED. Wi-FI SSID and KEY are wrote correctly. I try to ping my router - 100% loss. Green LED on my adapter is On. I still can see my recalbox via IP-devices list. Please, give me an advice.

When I used Raspbian, I just followed this instructions:

http://barntek.net/simplemachinesforum/index.php?topic=190.0

And it works great . But it isn`t helped me in Recalbox.
I place htc_9271.fw firmware to /lib/firmware. Then I add adapter definition to network config - nano /etc/network/interfaces.base:

auto lo

iface lo inet loopback
iface eth0 inet dhcp

auto wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa.conf

after reboot my Wi-Fi adapter still not working. LED indicator still off.

I don`t know how can I solve this problem.

Hello. I`ve got RP2 + TP-Link WN722N. When I plug it in, nothing happens. Please, help me.

Powe supply: 2A