@davidb2111

Hi David,

Sure, I'll do this now and update you with the results.

@davidb2111

I tried to follow what you did in terms of reading the messages and from a google searches I found this

https://github.com/timvideos/HDMI2USB-jahanzeb-firmware/issues/105
Logs from connecting a HDMI2USB with no firmware loaded;

[2003687.988663] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb

https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/drm_edid.c

• Avoid sending the segment addr to not upset non-compliant
  * DDC monitors.
  */
  ret = i2c_transfer(adapter, &msgs[3 - xfers], xfers);

   if (ret == -ENXIO) {
   	DRM_DEBUG_KMS("drm: skipping non-existent adapter %s\n",
   			adapter->name);
   	break;
  

https://forums.gentoo.org/viewtopic-t-1080762-start-0.html

after looking and finding that you have to make the edid bin's from /kernel/Documentation/EDID i was able to use them buttttt

looks like edid_firmware was moved from drm_kms_helper to drm at some point, and somewhere got messed up
i'm guessing it used to work now it searches for edid and bombs out anyway

I don't know if this will help though

7.2.1-beta3

setenv videoconfig "drm.edid_firmware=edid/1920x1080.bin"
No image on screen
Support log
https://transfer.sh/oNcmn/recalbox-support-4ac87f71-bd36-7394-7fb9-471520722989.tar.gz

history

1  history
2  mount -o remount,rw /boot
3  sed -E -i 's/^(setenv bootargs ".*)"/\1 drm.debug=0x04 "/' /boot/boot.ini
4  reboot
5  history

dmesg

[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 5.4.77 (root@a914337f7dcf) (gcc version 10.2.0 (Buildroot 2020.11-dirty)) #1 SMP PREEMPT Sun May 2 00:05:45 CEST 2021
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 128 MiB at 0xb6800000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] On node 0 totalpages: 518656
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 322048 pages, LIFO batch:63
[ 0.000000] Running under secure firmware.
[ 0.000000] percpu: Embedded 20 pages/cpu s52428 r8192 d21300 u81920
[ 0.000000] pcpu-alloc: s52428 r8192 d21300 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516928
[ 0.000000] Kernel command line: label=RECALBOX console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0 governor=performance drm.edid_firmware=edid/1920x1080.bin HPD=false vout=hdmi drm.debug=0x04 s5p_mfc.mem=16M
[ 0.000000] hdmi: using HDMI mode
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1906832K/2074624K available (10240K kernel code, 781K rwdata, 2748K rodata, 1024K init, 323K bss, 36720K reserved, 131072K cma-reserved, 1157120K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x330/0x50c with crng_init=0
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000030] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[ 0.001635] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.001654] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.001673] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001686] Ignoring duplicate/late registration of read_current_timer delay
[ 0.002220] Console: colour dummy device 80x30
[ 0.002263] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.002278] pid_max: default: 32768 minimum: 301
[ 0.002480] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002503] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.003581] CPU: Testing write buffer coherency: ok
[ 0.004150] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.005038] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.005329] ARM CCI driver probed
[ 0.005894] Exynos MCPM support installed
[ 0.006173] rcu: Hierarchical SRCU implementation.
[ 0.008622] soc soc0: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422001] REV[0x1] Detected
[ 0.009124] smp: Bringing up secondary CPUs ...
[ 0.010079] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.011152] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.012161] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.013214] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.013223] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.014331] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.014339] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.015427] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.015435] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.016572] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.016580] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.016771] smp: Brought up 1 node, 8 CPUs
[ 0.016788] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.016797] CPU: All CPU(s) started in HYP mode.
[ 0.016804] CPU: Virtualization extensions available.
[ 0.017900] devtmpfs: initialized
[ 0.036869] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.037320] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.037342] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.039777] pinctrl core: initialized pinctrl subsystem
[ 0.042081] NET: Registered protocol family 16
[ 0.045171] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.046554] audit: initializing netlink subsys (disabled)
[ 0.046763] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
[ 0.047466] cpuidle: using governor menu
[ 0.047838] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.047850] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.112572] EXYNOS5420 PMU initialized
[ 0.226793] iommu: Default domain type: Translated
[ 0.227245] usbcore: registered new interface driver usbfs
[ 0.227302] usbcore: registered new interface driver hub
[ 0.227443] usbcore: registered new device driver usb
[ 0.228046] s3c-i2c 12c80000.i2c: slave address 0x00
[ 0.228064] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[ 0.228317] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[ 0.228871] mc: Linux media interface: v0.10
[ 0.228918] videodev: Linux video capture interface: v2.00
[ 0.229026] pps_core: LinuxPPS API ver. 1 registered
[ 0.229037] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.229454] Advanced Linux Sound Architecture Driver Initialized.
[ 0.230227] clocksource: Switched to clocksource mct-frc
[ 0.526243] random: fast init done
[ 0.954819] VFS: Disk quotas dquot_6.6.0
[ 0.954893] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.965953] thermal_sys: Registered thermal governor 'step_wise'
[ 0.968251] NET: Registered protocol family 2
[ 0.968915] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.968950] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.969029] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.969187] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.969295] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.969340] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.969564] NET: Registered protocol family 1
[ 0.970208] RPC: Registered named UNIX socket transport module.
[ 0.970272] RPC: Registered udp transport module.
[ 0.970283] RPC: Registered tcp transport module.
[ 0.970293] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.970513] Trying to unpack rootfs image as initramfs...
[ 0.978958] Freeing initrd memory: 1264K
[ 0.980387] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.981132] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.984990] Initialise system trusted keyrings
[ 0.985214] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.994072] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.994907] NFS: Registering the id_resolver key type
[ 0.994937] Key type id_resolver registered
[ 0.994949] Key type id_legacy registered
[ 0.994971] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.995012] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.026074] Key type asymmetric registered
[ 1.026089] Asymmetric key pa**er 'x509' registered
[ 1.026149] bounce: pool size: 64 pages
[ 1.026188] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.026499] io scheduler mq-deadline registered
[ 1.026512] io scheduler kyber registered
[ 1.026648] io scheduler bfq registered
[ 1.029095] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[ 1.030065] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[ 1.030160] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[ 1.030566] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[ 1.030654] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[ 1.039023] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[ 1.039040] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.041561] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[ 1.041577] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.042455] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[ 1.042471] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 1.110694] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.112896] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 62, base_baud = 0) is a S3C6400/10
[ 1.972004] printk: console [ttySAC2] enabled
[ 1.977928] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[ 1.984251] exynos-mixer 14450000.mixer: Adding to iommu group 0
[ 1.991118] exynos-hdmi 14530000.hdmi: [drm:hdmi_probe] HDMI resource init
[ 1.991975] exynos-drm-g2d 10850000.g2d: Adding to iommu group 1
[ 1.997997] exynos-rotator 11c00000.rotator: Adding to iommu group 2
[ 2.010187] mali 11800000.gpu: Failed to get regulator
[ 2.013887] mali 11800000.gpu: Power control initialization failed
[ 2.030499] brd: module loaded
[ 2.046144] loop: module loaded
[ 2.048622] libphy: Fixed MDIO Bus: probed
[ 2.052228] usbcore: registered new interface driver r8152
[ 2.057414] usbcore: registered new interface driver cdc_ether
[ 2.063214] usbcore: registered new interface driver cdc_subset
[ 2.071255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.076340] ehci-exynos: EHCI EXYNOS driver
[ 2.080842] exynos-ehci 12110000.usb: EHCI Host Controller
[ 2.085966] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[ 2.093838] exynos-ehci 12110000.usb: irq 79, io mem 0x12110000
[ 2.114285] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 2.119122] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 2.127083] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.134269] usb usb1: Product: EHCI Host Controller
[ 2.139118] usb usb1: Manufacturer: Linux 5.4.77 ehci_hcd
[ 2.144490] usb usb1: SerialNumber: 12110000.usb
[ 2.149643] hub 1-0:1.0: USB hub found
[ 2.152851] hub 1-0:1.0: 3 ports detected
[ 2.157701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.162962] ohci-exynos: OHCI EXYNOS driver
[ 2.167295] exynos-ohci 12120000.usb: USB Host Controller
[ 2.172501] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[ 2.180226] exynos-ohci 12120000.usb: irq 79, io mem 0x12120000
[ 2.246509] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 2.253319] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.261507] usb usb2: Product: USB Host Controller
[ 2.265271] usb usb2: Manufacturer: Linux 5.4.77 ohci_hcd
[ 2.270642] usb usb2: SerialNumber: 12120000.usb
[ 2.275780] hub 2-0:1.0: USB hub found
[ 2.279002] hub 2-0:1.0: 3 ports detected
[ 2.285055] mousedev: PS/2 mouse device common for all mice
[ 2.290369] i2c /dev entries driver
[ 2.313892] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[ 2.330641] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[ 2.351377] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[ 2.428434] s5m-rtc s2mps14-rtc: registered as rtc0
[ 2.432414] s2mps11-clk s2mps11-clk: DMA mask not set
[ 2.439848] s5p-jpeg 11f50000.jpeg: Adding to iommu group 3
[ 2.444342] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video20
[ 2.451242] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video21
[ 2.458184] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[ 2.463838] s5p-jpeg 11f60000.jpeg: Adding to iommu group 4
[ 2.469518] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video22
[ 2.476456] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video23
[ 2.483400] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[ 2.489540] s5p-mfc 11000000.codec: Adding to iommu group 5
[ 2.512116] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[ 2.519800] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[ 2.528410] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ 2.538947] s5p-mfc 11000000.codec: decoder registered as /dev/video10
[ 2.545427] s5p-mfc 11000000.codec: encoder registered as /dev/video11
[ 2.553775] exynos-gsc 13e00000.video-scaler: Adding to iommu group 6
[ 2.559929] exynos-gsc 13e10000.video-scaler: Adding to iommu group 7
[ 2.575597] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[ 2.583044] device-mapper: uevent: version 1.0.3
[ 2.587318] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 2.611785] sdhci: Secure Digital Host Controller Interface driver
[ 2.616520] sdhci: Copyright(c) Pierre Ossman
[ 2.621014] Synopsys Designware Multimedia Card Interface Driver
[ 2.627381] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[ 2.633748] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 2.640081] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 2.645471] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 81,64 bit host data width,64 deep fifo
[ 2.654889] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[ 2.660262] mmc_host mmc0: card is non-removable.
[ 2.682262] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.703365] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[ 2.708817] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 2.715208] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 2.720588] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 82,64 bit host data width,64 deep fifo
[ 2.745101] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.760636] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
[ 2.769243] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.775643] s5p-secss 10830000.sss: s5p-sss driver registered
[ 2.780782] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.793378] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[ 2.798667] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[ 2.805230] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[ 2.811834] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[ 2.818629] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0_0)
[ 2.824053] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[ 2.827590] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0_1)
[ 2.827881] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[ 2.829072] mmc1: new ultra high speed SDR104 SDHC card at address 0007
[ 2.830463] mmcblk1: mmc1:0007 SD32G 29.0 GiB
[ 2.833232] mmcblk1: p1 p2 p3
[ 2.867767] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1_0)
[ 2.875629] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1_1)
[ 2.885118] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0
[ 2.891746] exynos-adc 12d10000.adc: IRQ index 1 not found
[ 2.894834] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
[ 2.910059] NET: Registered protocol family 17
[ 2.913052] NET: Registered protocol family 15
[ 2.917493] Key type dns_resolver registered
[ 2.922096] Registering SWP/SWPB emulation handler
[ 2.926608] registered taskstats version 1
[ 2.930544] Loading compiled-in X.509 certificates
[ 2.935407] Key type ._fscrypt registered
[ 2.939294] Key type .fscrypt registered
[ 2.943993] Key type encrypted registered
[ 2.980222] exynos-asv 10000000.chipid: cpu0 opp0, freq: 1500 missing
[ 2.985235] exynos-asv 10000000.chipid: cpu4 opp0, freq: 2100 missing
[ 2.992510] exynos-hdmi 14530000.hdmi: [drm:hdmi_probe] HDMI resource init
[ 2.994829] OF: graph: no port node found in /soc/hdmi@14530000
[ 3.001528] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[ 3.007977] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0b6da68)
[ 3.014532] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0b6e0ec)
[ 3.021425] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered.
[ 3.029330] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0b6f034)
[ 3.035835] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully
[ 3.044221] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0b6f8c0)
[ 3.051065] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.057649] [drm] No driver support for vblank timestamp query.
[ 3.063583] [drm:drm_client_modeset_probe]
[ 3.063610] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[ 3.063627] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1] status updated from unknown to connected
[ 3.063898] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
[ 3.063968] [drm:drm_client_modeset_probe] No connectors reported connected with modes
[ 3.063978] [drm:drm_client_modeset_probe] connector 43 enabled? yes
[ 3.063993] [drm:drm_client_modeset_probe] Not using firmware configuration
[ 3.064009] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 43
[ 3.064025] [drm:drm_client_modeset_probe] looking for preferred mode on connector 43 0
[ 3.064140] [drm:drm_client_modeset_probe] found mode none
[ 3.064149] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config
[ 3.064167] [drm] Cannot find any crtc or sizes
[ 3.068446] [drm:drm_client_modeset_probe]
[ 3.068463] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[ 3.068705] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
[ 3.068714] [drm:drm_client_modeset_probe] No connectors reported connected with modes
[ 3.068722] [drm:drm_client_modeset_probe] connector 43 enabled? yes
[ 3.068732] [drm:drm_client_modeset_probe] Not using firmware configuration
[ 3.068742] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 43
[ 3.068749] [drm:drm_client_modeset_probe] looking for preferred mode on connector 43 0
[ 3.068757] [drm:drm_client_modeset_probe] found mode none
[ 3.068765] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config
[ 3.068776] [drm] Cannot find any crtc or sizes
[ 3.073036] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
[ 3.082790] mali 11800000.gpu: GPU identified as 0x0620 r0p1 status 0
[ 3.088683] mali 11800000.gpu: Protected mode not available
[ 3.094969] mali 11800000.gpu: Probed as mali0
[ 3.100085] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
[ 3.104919] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 3.109689] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
[ 3.117703] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[ 3.126751] xhci-hcd xhci-hcd.8.auto: irq 159, io mem 0x12000000
[ 3.133195] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 3.140864] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.148058] usb usb3: Product: xHCI Host Controller
[ 3.152907] usb usb3: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.158283] usb usb3: SerialNumber: xhci-hcd.8.auto
[ 3.163748] hub 3-0:1.0: USB hub found
[ 3.166897] hub 3-0:1.0: 1 port detected
[ 3.171115] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 3.176224] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[ 3.183857] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed
[ 3.190426] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.198579] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 3.201339] devfreq 11800000.gpu: Couldn't update frequency transition information.
[ 3.206649] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.206667] usb usb4: Product: xHCI Host Controller
[ 3.226307] usb usb4: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.231679] usb usb4: SerialNumber: xhci-hcd.8.auto
[ 3.237186] hub 4-0:1.0: USB hub found
[ 3.240300] hub 4-0:1.0: 1 port detected
[ 3.246943] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
[ 3.251729] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[ 3.256553] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[ 3.264588] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[ 3.273623] xhci-hcd xhci-hcd.9.auto: irq 160, io mem 0x12400000
[ 3.280113] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 3.287755] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.294932] usb usb5: Product: xHCI Host Controller
[ 3.299775] usb usb5: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.305145] usb usb5: SerialNumber: xhci-hcd.9.auto
[ 3.310750] hub 5-0:1.0: USB hub found
[ 3.313716] hub 5-0:1.0: 1 port detected
[ 3.318025] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[ 3.323099] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[ 3.330716] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
[ 3.337303] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.345465] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 3.353508] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.360691] usb usb6: Product: xHCI Host Controller
[ 3.365543] usb usb6: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.370915] usb usb6: SerialNumber: xhci-hcd.9.auto
[ 3.376387] hub 6-0:1.0: USB hub found
[ 3.379562] hub 6-0:1.0: 1 port detected
[ 3.385091] rtc rtc1: invalid alarm value: 1900-01-17T00:00:00
[ 3.389705] s3c-rtc 101e0000.rtc: registered as rtc1
[ 3.397741] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[ 3.405694] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[ 3.413425] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
[ 3.421634] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz)
[ 3.430188] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[ 3.438721] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[ 3.446678] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[ 3.454589] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~ 67000 KHz)
[ 3.463057] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[ 3.470942] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[ 3.479328] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[ 3.487443] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[ 3.495654] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[ 3.504455] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[ 3.512673] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[ 3.521724] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[ 3.535548] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:02:51 UTC (946684971)
[ 3.591674] ALSA device list:
[ 3.593187] No soundcards found.
[ 3.599790] Freeing unused kernel memory: 1024K
[ 3.603522] Run /init as init process
[ 3.658401] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 3.690686] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3.788442] EXT4-fs (mmcblk1p3): recovery complete
[ 3.792572] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.818734] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.22
[ 3.825515] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.832598] usb 3-1: Product: USB2.0 Hub
[ 3.836481] usb 3-1: Manufacturer: GenesysLogic
[ 3.873527] /dev/loop0: Can't open blockdev
[ 3.877532] /dev/loop0: Can't open blockdev
[ 3.896126] hub 3-1:1.0: USB hub found
[ 3.898922] hub 3-1:1.0: 2 ports detected
[ 4.022583] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.049630] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=92.22
[ 4.056371] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.063493] usb 4-1: Product: USB3.0 Hub
[ 4.067367] usb 4-1: Manufacturer: GenesysLogic
[ 4.103195] hub 4-1:1.0: USB hub found
[ 4.105820] hub 4-1:1.0: 2 ports detected
[ 4.126330] [drm:drm_helper_hpd_irq_event] [CONNECTOR:43:HDMI-A-1] status updated from connected to connected
[ 4.254327] usb 3-1.1: new full-speed USB device number 3 using xhci-hcd
[ 4.361009] usb 3-1.1: New USB device found, idVendor=1915, idProduct=1047, bcdDevice= 1.78
[ 4.367927] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.375206] usb 3-1.1: Product: ZY Control
[ 4.379272] usb 3-1.1: Manufacturer: ZY.Ltd
[ 4.522567] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.548747] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 4.555589] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 4.562675] usb 6-1: Product: USB 10/100/1000 LAN
[ 4.567351] usb 6-1: Manufacturer: Realtek
[ 4.571425] usb 6-1: SerialNumber: 000001000000
[ 4.793928] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.868245] r8152 6-1:1.0 eth0: v1.10.11
[ 5.347625] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[ 5.352843] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[ 5.361500] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s
[ 5.370862] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s mapping ok
[ 5.376480] odroid-audio sound: i2s-hifi <-> snd-soc-dummy-dai mapping ok
[ 5.383379] dma-pl330 3880000.adma: PM domain MAU will not be powered off
[ 5.390731] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s-sec mapping ok
[ 5.424668] udevd[230]: starting version 3.2.9
[ 5.447298] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.452397] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.458865] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.483294] udevd[231]: starting eudev-3.2.9
[ 5.648394] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 2
[ 5.656001] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000
[ 5.662153] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000
[ 5.670883] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 5.859298] input: ZY.Ltd ZY Control as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.0/0003:1915:1047.0001/input/input1
[ 5.934526] hid-generic 0003:1915:1047.0001: input,hidraw0: USB HID v1.01 Keyboard [ZY.Ltd ZY Control] on usb-xhci-hcd.8.auto-1.1/input0
[ 5.948205] input: ZY.Ltd ZY Control Mouse as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.1/0003:1915:1047.0002/input/input2
[ 5.961883] input: ZY.Ltd ZY Control Consumer Control as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.1/0003:1915:1047.0002/input/input3
[ 6.034505] input: ZY.Ltd ZY Control System Control as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.1/0003:1915:1047.0002/input/input4
[ 6.049020] hid-generic 0003:1915:1047.0002: input,hiddev96,hidraw1: USB HID v1.01 Mouse [ZY.Ltd ZY Control] on usb-xhci-hcd.8.auto-1.1/input1
[ 6.061760] usbcore: registered new interface driver usbhid
[ 6.066994] usbhid: USB HID core driver
[ 6.526746] random: crng init done
[ 6.529500] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.780701] Bluetooth: Core ver 2.22
[ 6.782909] NET: Registered protocol family 31
[ 6.787251] Bluetooth: HCI device and connection manager initialized
[ 6.793605] Bluetooth: HCI socket layer initialized
[ 6.798439] Bluetooth: L2CAP socket layer initialized
[ 6.803462] Bluetooth: SCO socket layer initialized
[ 6.833868] 8021q: 802.1Q VLAN Support v1.8
[ 6.866754] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.870685] Bluetooth: BNEP filters: protocol multicast
[ 6.875838] Bluetooth: BNEP socket layer initialized
[ 6.907278] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.944794] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.188131] fuse: init (API version 7.31)
[ 8.108799] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[ 8.109019] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
[ 8.298512] r8152 6-1:1.0 eth0: carrier on
[ 10.224974] NET: Registered protocol family 10
[ 10.229260] Segment Routing with IPv6
[ 10.644611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[ 10.644823] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
[ 2034.599268] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[ 2034.599527] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c

@davidb2111 Hi there,

7.2
setenv videoconfig "drm.edid_firmware=edid/1920x1080.bin"
No image on screen
Support log
https://transfer.sh/BgNXD/recalbox-support-1e3c5e5f-f12a-5f86-7fff-02eb678e9c6e.tar.gz

dmesg

[0.00] Booting Linux on physical CPU 0x100
[0.00] Linux version 5.4.77 (root@3f470502ff33) (gcc version 10.2.0 (Buildroot 2020.11-dirty)) #1 SMP PREEMPT Fri Apr 23 02:11:35 CEST 2021
[0.00] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[0.00] CPU: div instructions available: patching division code
[0.00] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[0.00] OF: fdt: Machine model: Hardkernel Odroid XU4
[0.00] Memory policy: Data cache writealloc
[0.00] cma: Reserved 128 MiB at 0xb6800000
[0.00] Samsung CPU ID: 0xe5422001
[0.00] On node 0 totalpages: 518656
[0.00] Normal zone: 1728 pages used for memmap
[0.00] Normal zone: 0 pages reserved
[0.00] Normal zone: 196608 pages, LIFO batch:63
[0.00] HighMem zone: 322048 pages, LIFO batch:63
[0.00] Running under secure firmware.
[0.00] percpu: Embedded 20 pages/cpu s52428 r8192 d21300 u81920
[0.00] pcpu-alloc: s52428 r8192 d21300 u81920 alloc=20*4096
[0.00] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[0.00] Built 1 zonelists, mobility grouping on. Total pages: 516928
[0.00] Kernel command line: label=RECALBOX console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0 governor=performance drm.edid_firmware=edid/1920x1080.bin HPD=false vout=hdmi drm.debug=0x04 s5p_mfc.mem=16M
[0.00] hdmi: using HDMI mode
[0.00] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[0.00] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[0.00] mem auto-init: stack:off, heap alloc:off, heap free:off
[0.00] Memory: 1906832K/2074624K available (10240K kernel code, 781K rwdata, 2748K rodata, 1024K init, 323K bss, 36720K reserved, 131072K cma-reserved, 1157120K highmem)
[0.00] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[0.00] rcu: Preemptible hierarchical RCU implementation.
[0.00] Tasks RCU enabled.
[0.00] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[0.00] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[0.00] GIC: Using split EOI/Deactivate mode
[0.00] random: get_random_bytes called from start_kernel+0x330/0x50c with crng_init=0
[0.00] Switching to timer-based delay loop, resolution 41ns
[0.00] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[0.00] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[0.00] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[0.00] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[0.00] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[0.00] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[0.00] Ignoring duplicate/late registration of read_current_timer delay
[0.00] Console: colour dummy device 80x30
[0.00] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[0.00] pid_max: default: 32768 minimum: 301
[0.00] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[0.00] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[0.00] CPU: Testing write buffer coherency: ok
[0.00] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[0.00] Setting up static identity map for 0x40100000 - 0x40100060
[0.00] ARM CCI driver probed
[0.00] Exynos MCPM support installed
[0.00] rcu: Hierarchical SRCU implementation.
[0.00] soc soc0: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422001] REV[0x1] Detected
[0.00] smp: Bringing up secondary CPUs ...
[0.01] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[0.01] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[0.01] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[0.01] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[0.01] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[0.01] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[0.01] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[0.01] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[0.01] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[0.01] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[0.01] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[0.01] smp: Brought up 1 node, 8 CPUs
[0.01] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[0.01] CPU: All CPU(s) started in HYP mode.
[0.01] CPU: Virtualization extensions available.
[0.01] devtmpfs: initialized
[0.03] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[0.03] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[0.03] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[0.03] pinctrl core: initialized pinctrl subsystem
[0.04] NET: Registered protocol family 16
[0.04] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[0.04] audit: initializing netlink subsys (disabled)
[0.04] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
[0.04] cpuidle: using governor menu
[0.04] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[0.04] hw-breakpoint: maximum watchpoint size is 8 bytes.
[0.11] EXYNOS5420 PMU initialized
[0.22] iommu: Default domain type: Translated
[0.22] usbcore: registered new interface driver usbfs
[0.22] usbcore: registered new interface driver hub
[0.22] usbcore: registered new device driver usb
[0.22] s3c-i2c 12c80000.i2c: slave address 0x00
[0.22] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[0.22] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[0.22] mc: Linux media interface: v0.10
[0.22] videodev: Linux video capture interface: v2.00
[0.22] pps_core: LinuxPPS API ver. 1 registered
[0.22] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[0.22] Advanced Linux Sound Architecture Driver Initialized.
[0.23] clocksource: Switched to clocksource mct-frc
[0.27] random: fast init done
[0.95] VFS: Disk quotas dquot_6.6.0
[0.95] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[0.96] thermal_sys: Registered thermal governor 'step_wise'
[0.96] NET: Registered protocol family 2
[0.96] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[0.96] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[0.96] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[0.96] TCP: Hash tables configured (established 8192 bind 8192)
[0.96] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[0.96] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[0.96] NET: Registered protocol family 1
[0.97] RPC: Registered named UNIX socket transport module.
[0.97] RPC: Registered udp transport module.
[0.97] RPC: Registered tcp transport module.
[0.97] RPC: Registered tcp NFSv4.1 backchannel transport module.
[0.97] Trying to unpack rootfs image as initramfs...
[0.97] Freeing initrd memory: 1264K
[0.98] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[0.98] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[0.98] Initialise system trusted keyrings
[0.98] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[0.99] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[0.99] NFS: Registering the id_resolver key type
[0.99] Key type id_resolver registered
[0.99] Key type id_legacy registered
[0.99] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[0.99] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[1.02] Key type asymmetric registered
[1.02] Asymmetric key pa**er 'x509' registered
[1.02] bounce: pool size: 64 pages
[1.02] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[1.02] io scheduler mq-deadline registered
[1.02] io scheduler kyber registered
[1.02] io scheduler bfq registered
[1.02] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[1.03] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[1.03] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[1.03] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[1.03] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[1.03] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[1.03] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[1.04] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[1.04] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[1.04] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[1.04] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[1.10] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[1.11] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 62, base_baud = 0) is a S3C6400/10
[1.97] printk: console [ttySAC2] enabled
[1.97] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[1.98] exynos-mixer 14450000.mixer: Adding to iommu group 0
[1.99] exynos-hdmi 14530000.hdmi: [drm:hdmi_probe] HDMI resource init
[1.99] exynos-drm-g2d 10850000.g2d: Adding to iommu group 1
[1.99] exynos-rotator 11c00000.rotator: Adding to iommu group 2
[2.00] mali 11800000.gpu: Failed to get regulator
[2.01] mali 11800000.gpu: Power control initialization failed
[2.02] brd: module loaded
[2.04] loop: module loaded
[2.04] libphy: Fixed MDIO Bus: probed
[2.05] usbcore: registered new interface driver r8152
[2.05] usbcore: registered new interface driver cdc_ether
[2.06] usbcore: registered new interface driver cdc_subset
[2.07] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[2.07] ehci-exynos: EHCI EXYNOS driver
[2.08] exynos-ehci 12110000.usb: EHCI Host Controller
[2.08] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[2.09] exynos-ehci 12110000.usb: irq 79, io mem 0x12110000
[2.11] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[2.11] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[2.12] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[2.13] usb usb1: Product: EHCI Host Controller
[2.13] usb usb1: Manufacturer: Linux 5.4.77 ehci_hcd
[2.14] usb usb1: SerialNumber: 12110000.usb
[2.14] hub 1-0:1.0: USB hub found
[2.15] hub 1-0:1.0: 3 ports detected
[2.15] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[2.16] ohci-exynos: OHCI EXYNOS driver
[2.16] exynos-ohci 12120000.usb: USB Host Controller
[2.17] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[2.18] exynos-ohci 12120000.usb: irq 79, io mem 0x12120000
[2.24] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[2.25] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[2.26] usb usb2: Product: USB Host Controller
[2.26] usb usb2: Manufacturer: Linux 5.4.77 ohci_hcd
[2.27] usb usb2: SerialNumber: 12120000.usb
[2.27] hub 2-0:1.0: USB hub found
[2.27] hub 2-0:1.0: 3 ports detected
[2.28] mousedev: PS/2 mouse device common for all mice
[2.29] i2c /dev entries driver
[2.31] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[2.33] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[2.35] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[2.42] s5m-rtc s2mps14-rtc: registered as rtc0
[2.43] s2mps11-clk s2mps11-clk: DMA mask not set
[2.43] s5p-jpeg 11f50000.jpeg: Adding to iommu group 3
[2.44] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video20
[2.45] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video21
[2.45] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[2.46] s5p-jpeg 11f60000.jpeg: Adding to iommu group 4
[2.46] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video22
[2.47] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video23
[2.48] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[2.48] s5p-mfc 11000000.codec: Adding to iommu group 5
[2.51] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[2.51] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[2.52] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[2.53] s5p-mfc 11000000.codec: decoder registered as /dev/video10
[2.54] s5p-mfc 11000000.codec: encoder registered as /dev/video11
[2.55] exynos-gsc 13e00000.video-scaler: Adding to iommu group 6
[2.56] exynos-gsc 13e10000.video-scaler: Adding to iommu group 7
[2.57] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[2.58] device-mapper: uevent: version 1.0.3
[2.58] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[2.61] sdhci: Secure Digital Host Controller Interface driver
[2.61] sdhci: Copyright(c) Pierre Ossman
[2.62] Synopsys Designware Multimedia Card Interface Driver
[2.62] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[2.63] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[2.64] dwmmc_exynos 12200000.mmc: Version ID is 250a
[2.64] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 81,64 bit host data width,64 deep fifo
[2.65] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[2.66] mmc_host mmc0: card is non-removable.
[2.68] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[2.70] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[2.70] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[2.71] dwmmc_exynos 12220000.mmc: Version ID is 250a
[2.72] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 82,64 bit host data width,64 deep fifo
[2.74] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[2.76] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
[2.76] ledtrig-cpu: registered to indicate activity on CPUs
[2.77] s5p-secss 10830000.sss: s5p-sss driver registered
[2.78] hidraw: raw HID events driver (C) Jiri Kosina
[2.79] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[2.79] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[2.80] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[2.81] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[2.81] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0_0)
[2.81] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[2.82] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[2.82] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0_1)
[2.85] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1_0)
[2.86] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1_1)
[2.87] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0
[2.87] exynos-adc 12d10000.adc: IRQ index 1 not found
[2.88] NET: Registered protocol family 17
[2.89] NET: Registered protocol family 15
[2.89] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
[2.89] Key type dns_resolver registered
[2.90] Registering SWP/SWPB emulation handler
[2.91] registered taskstats version 1
[2.91] Loading compiled-in X.509 certificates
[2.92] Key type ._fscrypt registered
[2.92] mmc1: new ultra high speed SDR104 SDHC card at address 0007
[2.92] Key type .fscrypt registered
[2.93] Key type encrypted registered
[2.93] mmcblk1: mmc1:0007 SD32G 29.0 GiB
[2.94] mmcblk1: p1 p2 p3
[2.99] exynos-asv 10000000.chipid: cpu0 opp0, freq: 1500 missing
[2.99] exynos-asv 10000000.chipid: cpu4 opp0, freq: 2100 missing
[3.00] exynos-hdmi 14530000.hdmi: [drm:hdmi_probe] HDMI resource init
[3.00] OF: graph: no port node found in /soc/hdmi@14530000
[3.01] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[3.01] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0b6da68)
[3.02] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0b6e0ec)
[3.03] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered.
[3.04] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0b6f034)
[3.04] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully
[3.05] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0b6f8c0)
[3.06] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[3.06] [drm] No driver support for vblank timestamp query.
[3.07] [drm:drm_client_modeset_probe]
[3.07] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[3.07] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1] status updated from unknown to connected
[3.07] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
[3.07] [drm:drm_client_modeset_probe] No connectors reported connected with modes
[3.07] [drm:drm_client_modeset_probe] connector 43 enabled? yes
[3.07] [drm:drm_client_modeset_probe] Not using firmware configuration
[3.07] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 43
[3.07] [drm:drm_client_modeset_probe] looking for preferred mode on connector 43 0
[3.07] [drm:drm_client_modeset_probe] found mode none
[3.07] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config
[3.07] [drm] Cannot find any crtc or sizes
[3.07] [drm:drm_client_modeset_probe]
[3.07] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[3.07] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
[3.07] [drm:drm_client_modeset_probe] No connectors reported connected with modes
[3.07] [drm:drm_client_modeset_probe] connector 43 enabled? yes
[3.07] [drm:drm_client_modeset_probe] Not using firmware configuration
[3.07] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 43
[3.07] [drm:drm_client_modeset_probe] looking for preferred mode on connector 43 0
[3.07] [drm:drm_client_modeset_probe] found mode none
[3.07] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config
[3.07] [drm] Cannot find any crtc or sizes
[3.08] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
[3.09] mali 11800000.gpu: GPU identified as 0x0620 r0p1 status 0
[3.09] mali 11800000.gpu: Protected mode not available
[3.10] mali 11800000.gpu: Probed as mali0
[3.10] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
[3.11] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[3.11] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
[3.12] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[3.13] xhci-hcd xhci-hcd.8.auto: irq 159, io mem 0x12000000
[3.14] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[3.15] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[3.15] usb usb3: Product: xHCI Host Controller
[3.16] usb usb3: Manufacturer: Linux 5.4.77 xhci-hcd
[3.16] usb usb3: SerialNumber: xhci-hcd.8.auto
[3.17] hub 3-0:1.0: USB hub found
[3.17] hub 3-0:1.0: 1 port detected
[3.18] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[3.18] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[3.19] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed
[3.19] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[3.20] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[3.21] devfreq 11800000.gpu: Couldn't update frequency transition information.
[3.21] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[3.21] usb usb4: Product: xHCI Host Controller
[3.21] usb usb4: Manufacturer: Linux 5.4.77 xhci-hcd
[3.21] usb usb4: SerialNumber: xhci-hcd.8.auto
[3.23] hub 4-0:1.0: USB hub found
[3.24] hub 4-0:1.0: 1 port detected
[3.25] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
[3.26] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[3.26] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[3.27] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[3.28] xhci-hcd xhci-hcd.9.auto: irq 160, io mem 0x12400000
[3.28] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[3.29] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[3.30] usb usb5: Product: xHCI Host Controller
[3.30] usb usb5: Manufacturer: Linux 5.4.77 xhci-hcd
[3.31] usb usb5: SerialNumber: xhci-hcd.9.auto
[3.32] hub 5-0:1.0: USB hub found
[3.32] hub 5-0:1.0: 1 port detected
[3.32] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[3.33] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[3.34] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
[3.34] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[3.35] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[3.36] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[3.37] usb usb6: Product: xHCI Host Controller
[3.37] usb usb6: Manufacturer: Linux 5.4.77 xhci-hcd
[3.38] usb usb6: SerialNumber: xhci-hcd.9.auto
[3.38] hub 6-0:1.0: USB hub found
[3.38] hub 6-0:1.0: 1 port detected
[3.39] rtc rtc1: invalid alarm value: 1900-01-11T00:00:00
[3.39] s3c-rtc 101e0000.rtc: registered as rtc1
[3.40] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[3.41] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[3.42] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
[3.43] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz)
[3.43] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[3.44] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[3.45] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[3.46] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~ 67000 KHz)
[3.47] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[3.48] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[3.48] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[3.49] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[3.50] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[3.51] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[3.52] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[3.53] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[3.54] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:07:00 UTC (946685220)
[3.59] ALSA device list:
[3.59] No soundcards found.
[3.60] Freeing unused kernel memory: 1024K
[3.61] Run /init as init process
[3.66] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[3.70] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[3.77] EXT4-fs (mmcblk1p3): recovery complete
[3.77] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
[3.82] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.22
[3.83] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[3.83] /dev/loop0: Can't open blockdev
[3.84] usb 3-1: Product: USB2.0 Hub
[3.84] usb 3-1: Manufacturer: GenesysLogic
[3.84] /dev/loop0: Can't open blockdev
[3.90] hub 3-1:1.0: USB hub found
[3.90] hub 3-1:1.0: 2 ports detected
[4.03] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[4.05] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=92.22
[4.06] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[4.07] usb 4-1: Product: USB3.0 Hub
[4.07] usb 4-1: Manufacturer: GenesysLogic
[4.11] hub 4-1:1.0: USB hub found
[4.11] hub 4-1:1.0: 2 ports detected
[4.12] [drm:drm_helper_hpd_irq_event] [CONNECTOR:43:HDMI-A-1] status updated from connected to connected
[4.26] usb 3-1.1: new full-speed USB device number 3 using xhci-hcd
[4.36] usb 3-1.1: New USB device found, idVendor=1915, idProduct=1047, bcdDevice= 1.78
[4.37] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[4.38] usb 3-1.1: Product: ZY Control
[4.38] usb 3-1.1: Manufacturer: ZY.Ltd
[4.53] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[4.55] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[4.56] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[4.56] usb 6-1: Product: USB 10/100/1000 LAN
[4.57] usb 6-1: Manufacturer: Realtek
[4.57] usb 6-1: SerialNumber: 000001000000
[4.78] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[4.85] r8152 6-1:1.0 eth0: v1.10.11
[5.19] udevd[229]: starting version 3.2.9
[5.21] random: udevd: uninitialized urandom read (16 bytes read)
[5.22] random: udevd: uninitialized urandom read (16 bytes read)
[5.23] random: udevd: uninitialized urandom read (16 bytes read)
[5.25] udevd[230]: starting eudev-3.2.9
[5.34] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[5.34] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[5.35] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s
[5.36] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s mapping ok
[5.37] odroid-audio sound: i2s-hifi <-> snd-soc-dummy-dai mapping ok
[5.38] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s-sec mapping ok
[5.38] dma-pl330 3880000.adma: PM domain MAU will not be powered off
[5.42] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[5.43] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 2
[5.44] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000
[5.44] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000
[5.64] input: ZY.Ltd ZY Control as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.0/0003:1915:1047.0001/input/input1
[5.71] hid-generic 0003:1915:1047.0001: input,hidraw0: USB HID v1.01 Keyboard [ZY.Ltd ZY Control] on usb-xhci-hcd.8.auto-1.1/input0
[5.72] input: ZY.Ltd ZY Control Mouse as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.1/0003:1915:1047.0002/input/input2
[5.74] input: ZY.Ltd ZY Control Consumer Control as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.1/0003:1915:1047.0002/input/input3
[5.81] input: ZY.Ltd ZY Control System Control as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.1/0003:1915:1047.0002/input/input4
[5.82] hid-generic 0003:1915:1047.0002: input,hiddev96,hidraw1: USB HID v1.01 Mouse [ZY.Ltd ZY Control] on usb-xhci-hcd.8.auto-1.1/input1
[5.84] usbcore: registered new interface driver usbhid
[5.84] usbhid: USB HID core driver
[7.08] urandom_read: 3 callbacks suppressed
[7.08] random: dbus-uuidgen: uninitialized urandom read (12 bytes read)
[7.09] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
[7.11] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[7.24] random: crng init done
[7.24] random: 1 urandom warning(s) missed due to ratelimiting
[7.62] Bluetooth: Core ver 2.22
[7.62] NET: Registered protocol family 31
[7.63] Bluetooth: HCI device and connection manager initialized
[7.63] Bluetooth: HCI socket layer initialized
[7.64] Bluetooth: L2CAP socket layer initialized
[7.64] Bluetooth: SCO socket layer initialized
[7.65] 8021q: 802.1Q VLAN Support v1.8
[7.69] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[7.70] Bluetooth: BNEP filters: protocol multicast
[7.70] Bluetooth: BNEP socket layer initialized
[7.72] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[7.76] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[8.00] fuse: init (API version 7.31)
[8.29] r8152 6-1:1.0 eth0: carrier on
[8.87] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[8.87] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
[10.64] NET: Registered protocol family 10
[10.64] Segment Routing with IPv6
[11.03] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[11.03] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c

@davidb2111 Hi David,

No problem, I will try that new line you gave me

** setenv videoconfig "drm.edid_firmware=edid/1920x1080.bin" **
on 7.2 and record the results

then try it on the new beta you just released (7.2.1-beta3) and record the results again.

Thank you

@davidb2111

May 5 15:15:37 RECALBOX syslog.info syslogd started: BusyBox v1.32.0
May 5 15:15:38 RECALBOX user.notice kernel: klogd started: BusyBox v1.32.0 (2021-04-23 00:45:19 CEST)
May 5 15:15:38 RECALBOX user.info kernel: [0.0] Booting Linux on physical CPU 0x100
May 5 15:15:38 RECALBOX user.notice kernel: [0.0] Linux version 5.4.77 (root@3f470502ff33) (gcc version 10.2.0 (Buildroot 2020.11-dirty)) #1 SMP PREEMPT Fri Apr 23 02:11:35 CEST 2021
May 5 15:15:38 RECALBOX user.info kernel: [0.0] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
May 5 15:15:38 RECALBOX user.info kernel: [0.0] CPU: div instructions available: patching division code
May 5 15:15:38 RECALBOX user.info kernel: [0.0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
May 5 15:15:38 RECALBOX user.info kernel: [0.0] OF: fdt: Machine model: Hardkernel Odroid XU4
May 5 15:15:38 RECALBOX user.info kernel: [0.0] Memory policy: Data cache writealloc
May 5 15:15:38 RECALBOX user.info kernel: [0.0] cma: Reserved 128 MiB at 0xb6800000
May 5 15:15:38 RECALBOX user.info kernel: [0.0] Samsung CPU ID: 0xe5422001
May 5 15:15:38 RECALBOX user.debug kernel: [0.0] On node 0 totalpages: 518656
May 5 15:15:38 RECALBOX user.debug kernel: [0.0] Normal zone: 1728 pages used for memmap
May 5 15:15:38 RECALBOX user.debug kernel: [0.0] Normal zone: 0 pages reserved
May 5 15:15:38 RECALBOX user.debug kernel: [0.0] Normal zone: 196608 pages, LIFO batch:63
May 5 15:15:38 RECALBOX user.debug kernel: [0.0] HighMem zone: 322048 pages, LIFO batch:63
May 5 15:15:38 RECALBOX user.info kernel: [0.0] Running under secure firmware.
May 5 15:15:38 RECALBOX user.info kernel: [0.0] percpu: Embedded 20 pages/cpu s52428 r8192 d21300 u81920
May 5 15:15:38 RECALBOX user.debug kernel: [0.0] pcpu-alloc: s52428 r8192 d21300 u81920 alloc=20*4096
May 5 15:15:38 RECALBOX user.debug kernel: [0.0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
May 5 15:15:38 RECALBOX user.info kernel: [0.0] Built 1 zonelists, mobility grouping on. Total pages: 516928
May 5 15:15:38 RECALBOX user.notice kernel: [0.0] Kernel command line: label=RECALBOX console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0 governor=performance video=HDMI-A-1:1920x1080@60 HPD=false vout=hdmi drm.debug=0x04 s5p_mfc.mem=16M
May 5 15:15:38 RECALBOX user.info kernel: [0.0] hdmi: using HDMI mode
May 5 15:15:38 RECALBOX user.info kernel: [0.0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
May 5 15:15:38 RECALBOX user.info kernel: [0.0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
May 5 15:15:38 RECALBOX user.info kernel: [0.0] mem auto-init: stack:off, heap alloc:off, heap free:off
May 5 15:15:38 RECALBOX user.info kernel: [0.0] Memory: 1906832K/2074624K available (10240K kernel code, 781K rwdata, 2748K rodata, 1024K init, 323K bss, 36720K reserved, 131072K cma-reserved, 1157120K highmem)
May 5 15:15:38 RECALBOX user.info kernel: [0.0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
May 5 15:15:38 RECALBOX user.info kernel: [0.0] rcu: Preemptible hierarchical RCU implementation.
May 5 15:15:38 RECALBOX user.info kernel: [0.0] Tasks RCU enabled.
May 5 15:15:38 RECALBOX user.info kernel: [0.0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
May 5 15:15:38 RECALBOX user.info kernel: [0.0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
May 5 15:15:38 RECALBOX user.info kernel: [0.0] GIC: Using split EOI/Deactivate mode
May 5 15:15:38 RECALBOX user.notice kernel: [0.0] random: get_random_bytes called from start_kernel+0x330/0x50c with crng_init=0
May 5 15:15:38 RECALBOX user.info kernel: [0.0] Switching to timer-based delay loop, resolution 41ns
May 5 15:15:38 RECALBOX user.info kernel: [0.0] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
May 5 15:15:38 RECALBOX user.info kernel: [0.00] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
May 5 15:15:38 RECALBOX user.warn kernel: [0.00] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
May 5 15:15:38 RECALBOX user.info kernel: [0.00] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
May 5 15:15:38 RECALBOX user.info kernel: [0.00] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
May 5 15:15:38 RECALBOX user.info kernel: [0.00] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
May 5 15:15:38 RECALBOX user.info kernel: [0.00] Ignoring duplicate/late registration of read_current_timer delay
May 5 15:15:38 RECALBOX user.info kernel: [0.00] Console: colour dummy device 80x30
May 5 15:15:38 RECALBOX user.info kernel: [0.00] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
May 5 15:15:38 RECALBOX user.info kernel: [0.00] pid_max: default: 32768 minimum: 301
May 5 15:15:38 RECALBOX user.info kernel: [0.00] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
May 5 15:15:38 RECALBOX user.info kernel: [0.00] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
May 5 15:15:38 RECALBOX user.info kernel: [0.00] CPU: Testing write buffer coherency: ok
May 5 15:15:38 RECALBOX user.info kernel: [0.00] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
May 5 15:15:38 RECALBOX user.info kernel: [0.00] Setting up static identity map for 0x40100000 - 0x40100060
May 5 15:15:38 RECALBOX user.info kernel: [0.00] ARM CCI driver probed
May 5 15:15:38 RECALBOX user.info kernel: [0.00] Exynos MCPM support installed
May 5 15:15:38 RECALBOX user.info kernel: [0.00] rcu: Hierarchical SRCU implementation.
May 5 15:15:38 RECALBOX user.info kernel: [0.00] soc soc0: Exynos: CPU[EXYNOS58] PRO_ID[0xe5422001] REV[0x1] Detected
May 5 15:15:38 RECALBOX user.info kernel: [0.00] smp: Bringing up secondary CPUs ...
May 5 15:15:38 RECALBOX user.info kernel: [0.01] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
May 5 15:15:38 RECALBOX user.info kernel: [0.01] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
May 5 15:15:38 RECALBOX user.info kernel: [0.01] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
May 5 15:15:38 RECALBOX user.info kernel: [0.01] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
May 5 15:15:38 RECALBOX user.err kernel: [0.013] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
May 5 15:15:38 RECALBOX user.info kernel: [0.01] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
May 5 15:15:38 RECALBOX user.err kernel: [0.014] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
May 5 15:15:38 RECALBOX user.info kernel: [0.015] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
May 5 15:15:38 RECALBOX user.err kernel: [0.015] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
May 5 15:15:38 RECALBOX user.info kernel: [0.016] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
May 5 15:15:38 RECALBOX user.err kernel: [0.016] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
May 5 15:15:38 RECALBOX user.info kernel: [0.016] smp: Brought up 1 node, 8 CPUs
May 5 15:15:38 RECALBOX user.info kernel: [0.016] SMP: Total of 8 processors activated (384.00 BogoMIPS).
May 5 15:15:38 RECALBOX user.info kernel: [0.016] CPU: All CPU(s) started in HYP mode.
May 5 15:15:38 RECALBOX user.info kernel: [0.016] CPU: Virtualization extensions available.
May 5 15:15:38 RECALBOX user.info kernel: [0.017] devtmpfs: initialized
May 5 15:15:38 RECALBOX user.info kernel: [0.036] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
May 5 15:15:38 RECALBOX user.info kernel: [0.037] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
May 5 15:15:38 RECALBOX user.info kernel: [0.037] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
May 5 15:15:38 RECALBOX user.info kernel: [0.039] pinctrl core: initialized pinctrl subsystem
May 5 15:15:38 RECALBOX user.info kernel: [0.042] NET: Registered protocol family 16
May 5 15:15:38 RECALBOX user.info kernel: [0.045] DMA: preallocated 2048 KiB pool for atomic coherent allocations
May 5 15:15:38 RECALBOX user.info kernel: [0.046] audit: initializing netlink subsys (disabled)
May 5 15:15:38 RECALBOX user.notice kernel: [0.046] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
May 5 15:15:38 RECALBOX user.info kernel: [0.047] cpuidle: using governor menu
May 5 15:15:38 RECALBOX user.info kernel: [0.047] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
May 5 15:15:38 RECALBOX user.info kernel: [0.047] hw-breakpoint: maximum watchpoint size is 8 bytes.
May 5 15:15:38 RECALBOX user.info kernel: [0.112] EXYNOS5420 PMU initialized
May 5 15:15:38 RECALBOX user.info kernel: [0.226] iommu: Default domain type: Translated
May 5 15:15:38 RECALBOX user.info kernel: [0.227] usbcore: registered new interface driver usbfs
May 5 15:15:38 RECALBOX user.info kernel: [0.227] usbcore: registered new interface driver hub
May 5 15:15:38 RECALBOX user.info kernel: [0.227] usbcore: registered new device driver usb
May 5 15:15:38 RECALBOX user.info kernel: [0.228] s3c-i2c 12c80000.i2c: slave address 0x00
May 5 15:15:38 RECALBOX user.info kernel: [0.228] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
May 5 15:15:38 RECALBOX user.info kernel: [0.228] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
May 5 15:15:38 RECALBOX user.info kernel: [0.228] mc: Linux media interface: v0.10
May 5 15:15:38 RECALBOX user.info kernel: [0.228] videodev: Linux video capture interface: v2.00
May 5 15:15:38 RECALBOX user.info kernel: [0.229] pps_core: LinuxPPS API ver. 1 registered
May 5 15:15:38 RECALBOX user.info kernel: [0.229] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
May 5 15:15:38 RECALBOX user.info kernel: [0.229] Advanced Linux Sound Architecture Driver Initialized.
May 5 15:15:38 RECALBOX user.info kernel: [0.230] clocksource: Switched to clocksource mct-frc
May 5 15:15:38 RECALBOX user.notice kernel: [0.27] random: fast init done
May 5 15:15:38 RECALBOX user.notice kernel: [0.95] VFS: Disk quotas dquot_6.6.0
May 5 15:15:38 RECALBOX user.info kernel: [0.955] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May 5 15:15:38 RECALBOX user.info kernel: [0.966] thermal_sys: Registered thermal governor 'step_wise'
May 5 15:15:38 RECALBOX user.info kernel: [0.968] NET: Registered protocol family 2
May 5 15:15:38 RECALBOX user.info kernel: [0.969] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
May 5 15:15:38 RECALBOX user.info kernel: [0.969] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
May 5 15:15:38 RECALBOX user.info kernel: [0.969] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
May 5 15:15:38 RECALBOX user.info kernel: [0.969] TCP: Hash tables configured (established 8192 bind 8192)
May 5 15:15:38 RECALBOX user.info kernel: [0.969] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
May 5 15:15:38 RECALBOX user.info kernel: [0.969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
May 5 15:15:38 RECALBOX user.info kernel: [0.969] NET: Registered protocol family 1
May 5 15:15:38 RECALBOX user.info kernel: [0.970] RPC: Registered named UNIX socket transport module.
May 5 15:15:38 RECALBOX user.info kernel: [0.970] RPC: Registered udp transport module.
May 5 15:15:38 RECALBOX user.info kernel: [0.970] RPC: Registered tcp transport module.
May 5 15:15:38 RECALBOX user.info kernel: [0.970] RPC: Registered tcp NFSv4.1 backchannel transport module.
May 5 15:15:38 RECALBOX user.info kernel: [0.970] Trying to unpack rootfs image as initramfs...
May 5 15:15:38 RECALBOX user.info kernel: [0.979] Freeing initrd memory: 1264K
May 5 15:15:38 RECALBOX user.info kernel: [0.980] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
May 5 15:15:38 RECALBOX user.info kernel: [0.981] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
May 5 15:15:38 RECALBOX user.notice kernel: [0.98] Initialise system trusted keyrings
May 5 15:15:38 RECALBOX user.info kernel: [0.98] workingset: timestamp_bits=14 max_order=19 bucket_order=5
May 5 15:15:38 RECALBOX user.info kernel: [0.99] squashfs: version 4.0 (2009/01/31) Phillip Lougher
May 5 15:15:38 RECALBOX user.notice kernel: [0.99] NFS: Registering the id_resolver key type
May 5 15:15:38 RECALBOX user.notice kernel: [0.99] Key type id_resolver registered
May 5 15:15:38 RECALBOX user.notice kernel: [0.99] Key type id_legacy registered
May 5 15:15:38 RECALBOX user.info kernel: [0.99] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
May 5 15:15:38 RECALBOX user.info kernel: [0.99] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
May 5 15:15:38 RECALBOX user.notice kernel: [1.02] Key type asymmetric registered
May 5 15:15:38 RECALBOX user.notice kernel: [1.02] Asymmetric key pa**er 'x509' registered
May 5 15:15:38 RECALBOX user.info kernel: [1.02] bounce: pool size: 64 pages
May 5 15:15:38 RECALBOX user.info kernel: [1.02] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
May 5 15:15:38 RECALBOX user.info kernel: [1.02] io scheduler mq-deadline registered
May 5 15:15:38 RECALBOX user.info kernel: [1.02] io scheduler kyber registered
May 5 15:15:38 RECALBOX user.info kernel: [1.02] io scheduler bfq registered
May 5 15:15:38 RECALBOX user.warn kernel: [1.02] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
May 5 15:15:38 RECALBOX user.warn kernel: [1.03] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
May 5 15:15:38 RECALBOX user.warn kernel: [1.03] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
May 5 15:15:38 RECALBOX user.warn kernel: [1.03] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
May 5 15:15:38 RECALBOX user.warn kernel: [1.03] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
May 5 15:15:38 RECALBOX user.info kernel: [1.03] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
May 5 15:15:38 RECALBOX user.info kernel: [1.03] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
May 5 15:15:38 RECALBOX user.info kernel: [1.04] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
May 5 15:15:38 RECALBOX user.info kernel: [1.04] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
May 5 15:15:38 RECALBOX user.info kernel: [1.04] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
May 5 15:15:38 RECALBOX user.info kernel: [1.04] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
May 5 15:15:38 RECALBOX user.info kernel: [1.10] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
May 5 15:15:38 RECALBOX user.info kernel: [1.11] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 62, base_baud = 0) is a S3C6400/10
May 5 15:15:38 RECALBOX user.info kernel: [1.97] printk: console [ttySAC2] enabled
May 5 15:15:38 RECALBOX user.info kernel: [1.97] exynos-trng 10830600.rng: Exynos True Random Number Generator.
May 5 15:15:38 RECALBOX user.info kernel: [1.98] exynos-mixer 14450000.mixer: Adding to iommu group 0
May 5 15:15:38 RECALBOX user.debug kernel: [1.986] exynos-hdmi 14530000.hdmi: [drm:hdmi_probe] HDMI resource init
May 5 15:15:38 RECALBOX user.info kernel: [1.99] exynos-drm-g2d 10850000.g2d: Adding to iommu group 1
May 5 15:15:38 RECALBOX user.info kernel: [1.99] exynos-rotator 11c00000.rotator: Adding to iommu group 2
May 5 15:15:38 RECALBOX user.err kernel: [2.00] mali 11800000.gpu: Failed to get regulator
May 5 15:15:38 RECALBOX user.err kernel: [2.01] mali 11800000.gpu: Power control initialization failed
May 5 15:15:38 RECALBOX user.info kernel: [2.02] brd: module loaded
May 5 15:15:38 RECALBOX user.info kernel: [2.04] loop: module loaded
May 5 15:15:38 RECALBOX user.info kernel: [2.04] libphy: Fixed MDIO Bus: probed
May 5 15:15:38 RECALBOX user.info kernel: [2.05] usbcore: registered new interface driver r8152
May 5 15:15:38 RECALBOX user.info kernel: [2.05] usbcore: registered new interface driver cdc_ether
May 5 15:15:38 RECALBOX user.info kernel: [2.06] usbcore: registered new interface driver cdc_subset
May 5 15:15:38 RECALBOX user.info kernel: [2.06] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 5 15:15:38 RECALBOX user.info kernel: [2.07] ehci-exynos: EHCI EXYNOS driver
May 5 15:15:38 RECALBOX user.info kernel: [2.07] exynos-ehci 12110000.usb: EHCI Host Controller
May 5 15:15:38 RECALBOX user.info kernel: [2.08] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
May 5 15:15:38 RECALBOX user.info kernel: [2.09] exynos-ehci 12110000.usb: irq 79, io mem 0x12110000
May 5 15:15:38 RECALBOX user.info kernel: [2.11] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
May 5 15:15:38 RECALBOX user.info kernel: [2.11] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
May 5 15:15:38 RECALBOX user.info kernel: [2.12] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 5 15:15:38 RECALBOX user.info kernel: [2.13] usb usb1: Product: EHCI Host Controller
May 5 15:15:38 RECALBOX user.info kernel: [2.13] usb usb1: Manufacturer: Linux 5.4.77 ehci_hcd
May 5 15:15:38 RECALBOX user.info kernel: [2.14] usb usb1: SerialNumber: 12110000.usb
May 5 15:15:38 RECALBOX user.info kernel: [2.14] hub 1-0:1.0: USB hub found
May 5 15:15:38 RECALBOX user.info kernel: [2.14] hub 1-0:1.0: 3 ports detected
May 5 15:15:38 RECALBOX user.info kernel: [2.15] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 5 15:15:38 RECALBOX user.info kernel: [2.15] ohci-exynos: OHCI EXYNOS driver
May 5 15:15:38 RECALBOX user.info kernel: [2.16] exynos-ohci 12120000.usb: USB Host Controller
May 5 15:15:38 RECALBOX user.info kernel: [2.16] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
May 5 15:15:38 RECALBOX user.info kernel: [2.17] exynos-ohci 12120000.usb: irq 79, io mem 0x12120000
May 5 15:15:38 RECALBOX user.info kernel: [2.24] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
May 5 15:15:38 RECALBOX user.info kernel: [2.24] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 5 15:15:38 RECALBOX user.info kernel: [2.25] usb usb2: Product: USB Host Controller
May 5 15:15:38 RECALBOX user.info kernel: [2.26] usb usb2: Manufacturer: Linux 5.4.77 ohci_hcd
May 5 15:15:38 RECALBOX user.info kernel: [2.26] usb usb2: SerialNumber: 12120000.usb
May 5 15:15:38 RECALBOX user.info kernel: [2.27] hub 2-0:1.0: USB hub found
May 5 15:15:38 RECALBOX user.info kernel: [2.27] hub 2-0:1.0: 3 ports detected
May 5 15:15:38 RECALBOX user.info kernel: [2.28] mousedev: PS/2 mouse device common for all mice
May 5 15:15:38 RECALBOX user.info kernel: [2.28] i2c /dev entries driver
May 5 15:15:38 RECALBOX user.info kernel: [2.30] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
May 5 15:15:38 RECALBOX user.info kernel: [2.32] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
May 5 15:15:38 RECALBOX user.info kernel: [2.34] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
May 5 15:15:38 RECALBOX user.info kernel: [2.42] s5m-rtc s2mps14-rtc: registered as rtc0
May 5 15:15:38 RECALBOX user.warn kernel: [2.42] s2mps11-clk s2mps11-clk: DMA mask not set
May 5 15:15:38 RECALBOX user.info kernel: [2.43] s5p-jpeg 11f50000.jpeg: Adding to iommu group 3
May 5 15:15:38 RECALBOX user.info kernel: [2.44] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video20
May 5 15:15:38 RECALBOX user.info kernel: [2.44] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video21
May 5 15:15:38 RECALBOX user.info kernel: [2.45] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
May 5 15:15:38 RECALBOX user.info kernel: [2.46] s5p-jpeg 11f60000.jpeg: Adding to iommu group 4
May 5 15:15:38 RECALBOX user.info kernel: [2.46] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video22
May 5 15:15:38 RECALBOX user.info kernel: [2.47] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video23
May 5 15:15:38 RECALBOX user.info kernel: [2.47] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
May 5 15:15:38 RECALBOX user.info kernel: [2.48] s5p-mfc 11000000.codec: Adding to iommu group 5
May 5 15:15:38 RECALBOX user.info kernel: [2.50] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
May 5 15:15:38 RECALBOX user.warn kernel: [2.51] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
May 5 15:15:38 RECALBOX user.err kernel: [2.52] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel
May 5 15:15:38 RECALBOX user.info kernel: [2.53] s5p-mfc 11000000.codec: decoder registered as /dev/video10
May 5 15:15:38 RECALBOX user.info kernel: [2.54] s5p-mfc 11000000.codec: encoder registered as /dev/video11
May 5 15:15:38 RECALBOX user.info kernel: [2.55] exynos-gsc 13e00000.video-scaler: Adding to iommu group 6
May 5 15:15:38 RECALBOX user.info kernel: [2.55] exynos-gsc 13e10000.video-scaler: Adding to iommu group 7
May 5 15:15:38 RECALBOX user.info kernel: [2.57] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
May 5 15:15:38 RECALBOX user.info kernel: [2.57] device-mapper: uevent: version 1.0.3
May 5 15:15:38 RECALBOX user.info kernel: [2.58] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
May 5 15:15:38 RECALBOX user.info kernel: [2.60] sdhci: Secure Digital Host Controller Interface driver
May 5 15:15:38 RECALBOX user.info kernel: [2.61] sdhci: Copyright(c) Pierre Ossman
May 5 15:15:38 RECALBOX user.info kernel: [2.61] Synopsys Designware Multimedia Card Interface Driver
May 5 15:15:38 RECALBOX user.info kernel: [2.62] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
May 5 15:15:38 RECALBOX user.info kernel: [2.63] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
May 5 15:15:38 RECALBOX user.info kernel: [2.63] dwmmc_exynos 12200000.mmc: Version ID is 250a
May 5 15:15:38 RECALBOX user.info kernel: [2.64] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 81,64 bit host data width,64 deep fifo
May 5 15:15:38 RECALBOX user.info kernel: [2.65] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
May 5 15:15:38 RECALBOX user.info kernel: [2.65] mmc_host mmc0: card is non-removable.
May 5 15:15:38 RECALBOX user.info kernel: [2.67] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
May 5 15:15:38 RECALBOX user.info kernel: [2.70] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
May 5 15:15:38 RECALBOX user.info kernel: [2.70] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
May 5 15:15:38 RECALBOX user.info kernel: [2.71] dwmmc_exynos 12220000.mmc: Version ID is 250a
May 5 15:15:38 RECALBOX user.info kernel: [2.71] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 82,64 bit host data width,64 deep fifo
May 5 15:15:38 RECALBOX user.info kernel: [2.74] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
May 5 15:15:38 RECALBOX user.info kernel: [2.75] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
May 5 15:15:38 RECALBOX user.info kernel: [2.76] ledtrig-cpu: registered to indicate activity on CPUs
May 5 15:15:38 RECALBOX user.info kernel: [2.77] s5p-secss 10830000.sss: s5p-sss driver registered
May 5 15:15:38 RECALBOX user.info kernel: [2.77] hidraw: raw HID events driver (C) Jiri Kosina
May 5 15:15:38 RECALBOX user.info kernel: [2.79] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
May 5 15:15:38 RECALBOX user.info kernel: [2.79] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
May 5 15:15:38 RECALBOX user.info kernel: [2.80] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
May 5 15:15:38 RECALBOX user.info kernel: [2.80] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
May 5 15:15:38 RECALBOX user.info kernel: [2.81] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0_0)
May 5 15:15:38 RECALBOX user.info kernel: [2.82] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
May 5 15:15:38 RECALBOX user.info kernel: [2.82] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
May 5 15:15:38 RECALBOX user.info kernel: [2.82] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0_1)
May 5 15:15:38 RECALBOX user.info kernel: [2.83] mmc1: new ultra high speed SDR104 SDHC card at address 0007
May 5 15:15:38 RECALBOX user.info kernel: [2.84] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1_0)
May 5 15:15:38 RECALBOX user.info kernel: [2.85] mmcblk1: mmc1:0007 SD32G 29.0 GiB
May 5 15:15:38 RECALBOX user.info kernel: [2.85] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1_1)
May 5 15:15:38 RECALBOX user.info kernel: [2.87] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0
May 5 15:15:38 RECALBOX user.info kernel: [2.88] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
May 5 15:15:38 RECALBOX user.warn kernel: [2.88] dwmmc_exynos 12220000.mmc: Unexpected command timeout, state 3
May 5 15:15:38 RECALBOX user.err kernel: [2.90] exynos-adc 12d10000.adc: IRQ index 1 not found
May 5 15:15:38 RECALBOX user.info kernel: [2.91] NET: Registered protocol family 17
May 5 15:15:38 RECALBOX user.info kernel: [2.91] NET: Registered protocol family 15
May 5 15:15:38 RECALBOX user.notice kernel: [2.91] Key type dns_resolver registered
May 5 15:15:38 RECALBOX user.notice kernel: [2.92] Registering SWP/SWPB emulation handler
May 5 15:15:38 RECALBOX user.info kernel: [2.92] registered taskstats version 1
May 5 15:15:38 RECALBOX user.notice kernel: [2.93] Loading compiled-in X.509 certificates
May 5 15:15:38 RECALBOX user.notice kernel: [2.93] Key type ._fscrypt registered
May 5 15:15:38 RECALBOX user.notice kernel: [2.94] Key type .fscrypt registered
May 5 15:15:38 RECALBOX user.notice kernel: [2.94] Key type encrypted registered
May 5 15:15:38 RECALBOX user.info kernel: [2.98] exynos-asv 10000000.chipid: cpu0 opp0, freq: 1500 missing
May 5 15:15:38 RECALBOX user.info kernel: [2.98] exynos-asv 10000000.chipid: cpu4 opp0, freq: 2100 missing
May 5 15:15:38 RECALBOX user.debug kernel: [2.99] exynos-hdmi 14530000.hdmi: [drm:hdmi_probe] HDMI resource init
May 5 15:15:38 RECALBOX user.err kernel: [2.99] OF: graph: no port node found in /soc/hdmi@14530000
May 5 15:15:38 RECALBOX user.info kernel: [3.00] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
May 5 15:15:38 RECALBOX user.info kernel: [3.00] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0b6da68)
May 5 15:15:38 RECALBOX user.debug kernel: [3.01] [drm:drm_connector_init] cmdline mode for connector HDMI-A-1 1920x1080@60Hz
May 5 15:15:38 RECALBOX user.info kernel: [3.01] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0b6e0ec)
May 5 15:15:38 RECALBOX user.info kernel: [3.02] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered.
May 5 15:15:38 RECALBOX user.info kernel: [3.02] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0b6f034)
May 5 15:15:38 RECALBOX user.info kernel: [3.03] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully
May 5 15:15:38 RECALBOX user.info kernel: [3.04] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0b6f8c0)
May 5 15:15:38 RECALBOX user.info kernel: [3.05] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
May 5 15:15:38 RECALBOX user.info kernel: [3.05] [drm] No driver support for vblank timestamp query.
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_client_modeset_probe]
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1] status updated from unknown to connected
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] exynos-hdmi 14530000.hdmi: [drm:hdmi_mode_valid] xres=1920, yres=1080, refresh=0, intl=0 clock=172780000
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] exynos-hdmi 14530000.hdmi: [drm:hdmi_mode_valid] Could not find phy config for 172780000
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 0 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x20 0x6
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: BAD
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_client_modeset_probe] No connectors reported connected with modes
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_client_modeset_probe] connector 43 enabled? yes
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_client_modeset_probe] Not using firmware configuration
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 43
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_client_modeset_probe] found mode 1920x1080
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] [drm:drm_client_modeset_probe] desired mode 1920x1080 set on crtc 41 (0,0)
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] exynos-drm exynos-drm: [drm:exynos_drm_fbdev_create] surface width(1920), height(1080) and bpp(32
May 5 15:15:38 RECALBOX user.debug kernel: [3.06] exynos-drm exynos-drm: [drm:exynos_drm_gem_init] created file object = (ptrval)
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] exynos-mixer 14450000.mixer: [drm:exynos_drm_gem_create] dma_addr(0x20100000), size(0x7e9000)
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_fb_helper_hotplug_event.part.0]
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_client_modeset_probe]
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] exynos-hdmi 14530000.hdmi: [drm:hdmi_mode_valid] xres=1920, yres=1080, refresh=0, intl=0 clock=172780000
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] exynos-hdmi 14530000.hdmi: [drm:hdmi_mode_valid] Could not find phy config for 172780000
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 0 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x20 0x6
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: BAD
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_client_modeset_probe] No connectors reported connected with modes
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_client_modeset_probe] connector 43 enabled? yes
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_client_modeset_probe] Not using firmware configuration
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 43
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_client_modeset_probe] found mode 1920x1080
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_client_modeset_probe] picking CRTCs for 1920x1080 config
May 5 15:15:38 RECALBOX user.debug kernel: [3.07] [drm:drm_client_modeset_probe] desired mode 1920x1080 set on crtc 41 (0,0)

@davidb2111 Hi there,

as requested:

dmesg

[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 5.4.77 (root@3f470502ff33) (gcc version 10.2.0 (Buildroot 2020.11-dirty)) #1 SMP PREEMPT Fri Apr 23 02:11:35 CEST 2021
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 128 MiB at 0xb6800000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] On node 0 totalpages: 518656
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 322048 pages, LIFO batch:63
[ 0.000000] Running under secure firmware.
[ 0.000000] percpu: Embedded 20 pages/cpu s52428 r8192 d21300 u81920
[ 0.000000] pcpu-alloc: s52428 r8192 d21300 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516928
[ 0.000000] Kernel command line: label=RECALBOX console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0 governor=performance drm_kms_helper.edid_firmware=edid/1920x1080.bin HPD=false vout=hdmi drm.debug=0x04 s5p_mfc.mem=16M
[ 0.000000] [drm] drm_kms_helper.edid_firmware is deprecated, please use drm.edid_firmware instead.
[ 0.000000] hdmi: using HDMI mode
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1906832K/2074624K available (10240K kernel code, 781K rwdata, 2748K rodata, 1024K init, 323K bss, 36720K reserved, 131072K cma-reserved, 1157120K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x330/0x50c with crng_init=0
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000031] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[ 0.001638] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.001658] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.001678] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001692] Ignoring duplicate/late registration of read_current_timer delay
[ 0.002226] Console: colour dummy device 80x30
[ 0.002269] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.002284] pid_max: default: 32768 minimum: 301
[ 0.002485] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002508] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.003589] CPU: Testing write buffer coherency: ok
[ 0.004163] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.005049] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.005337] ARM CCI driver probed
[ 0.005910] Exynos MCPM support installed
[ 0.006190] rcu: Hierarchical SRCU implementation.
[ 0.008642] soc soc0: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422001] REV[0x1] Detected
[ 0.009139] smp: Bringing up secondary CPUs ...
[ 0.010096] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.011172] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.012249] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.013312] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.013322] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.014465] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.014473] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.015565] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.015573] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.016715] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.016723] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.016914] smp: Brought up 1 node, 8 CPUs
[ 0.016932] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.016941] CPU: All CPU(s) started in HYP mode.
[ 0.016948] CPU: Virtualization extensions available.
[ 0.018058] devtmpfs: initialized
[ 0.037039] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.037492] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.037513] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.039966] pinctrl core: initialized pinctrl subsystem
[ 0.042267] NET: Registered protocol family 16
[ 0.045348] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.046728] audit: initializing netlink subsys (disabled)
[ 0.046937] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
[ 0.047638] cpuidle: using governor menu
[ 0.048007] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.048020] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.112718] EXYNOS5420 PMU initialized
[ 0.226942] iommu: Default domain type: Translated
[ 0.227394] usbcore: registered new interface driver usbfs
[ 0.227451] usbcore: registered new interface driver hub
[ 0.227591] usbcore: registered new device driver usb
[ 0.228195] s3c-i2c 12c80000.i2c: slave address 0x00
[ 0.228213] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[ 0.228468] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[ 0.229006] mc: Linux media interface: v0.10
[ 0.229052] videodev: Linux video capture interface: v2.00
[ 0.229162] pps_core: LinuxPPS API ver. 1 registered
[ 0.229173] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.229595] Advanced Linux Sound Architecture Driver Initialized.
[ 0.230367] clocksource: Switched to clocksource mct-frc
[ 0.270393] random: fast init done
[ 0.954834] VFS: Disk quotas dquot_6.6.0
[ 0.954909] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.965931] thermal_sys: Registered thermal governor 'step_wise'
[ 0.968246] NET: Registered protocol family 2
[ 0.968911] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.968946] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.969025] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.969182] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.969291] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.969336] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.969562] NET: Registered protocol family 1
[ 0.970200] RPC: Registered named UNIX socket transport module.
[ 0.970213] RPC: Registered udp transport module.
[ 0.970223] RPC: Registered tcp transport module.
[ 0.970234] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.970511] Trying to unpack rootfs image as initramfs...
[ 0.978899] Freeing initrd memory: 1264K
[ 0.980329] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.981074] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.984949] Initialise system trusted keyrings
[ 0.985176] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.994067] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.995072] NFS: Registering the id_resolver key type
[ 0.995099] Key type id_resolver registered
[ 0.995111] Key type id_legacy registered
[ 0.995132] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.995178] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.025247] Key type asymmetric registered
[ 1.025262] Asymmetric key pa**er 'x509' registered
[ 1.025322] bounce: pool size: 64 pages
[ 1.025368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.025625] io scheduler mq-deadline registered
[ 1.025638] io scheduler kyber registered
[ 1.025782] io scheduler bfq registered
[ 1.028293] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[ 1.029280] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[ 1.029365] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[ 1.029720] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[ 1.029807] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[ 1.038172] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[ 1.038189] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.040768] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[ 1.040784] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.041634] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[ 1.041650] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 1.109871] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.112098] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 62, base_baud = 0) is a S3C6400/10
[ 1.981263] printk: console [ttySAC2] enabled
[ 1.987240] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[ 1.993542] exynos-mixer 14450000.mixer: Adding to iommu group 0
[ 2.000383] exynos-hdmi 14530000.hdmi: [drm:hdmi_probe] HDMI resource init
[ 2.001247] exynos-drm-g2d 10850000.g2d: Adding to iommu group 1
[ 2.007320] exynos-rotator 11c00000.rotator: Adding to iommu group 2
[ 2.019548] mali 11800000.gpu: Failed to get regulator
[ 2.023247] mali 11800000.gpu: Power control initialization failed
[ 2.039912] brd: module loaded
[ 2.055586] loop: module loaded
[ 2.058022] libphy: Fixed MDIO Bus: probed
[ 2.061676] usbcore: registered new interface driver r8152
[ 2.066856] usbcore: registered new interface driver cdc_ether
[ 2.072662] usbcore: registered new interface driver cdc_subset
[ 2.080666] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.085766] ehci-exynos: EHCI EXYNOS driver
[ 2.090245] exynos-ehci 12110000.usb: EHCI Host Controller
[ 2.095394] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[ 2.103266] exynos-ehci 12110000.usb: irq 79, io mem 0x12110000
[ 2.122424] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 2.127244] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 2.135222] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.142407] usb usb1: Product: EHCI Host Controller
[ 2.147258] usb usb1: Manufacturer: Linux 5.4.77 ehci_hcd
[ 2.152630] usb usb1: SerialNumber: 12110000.usb
[ 2.157803] hub 1-0:1.0: USB hub found
[ 2.160991] hub 1-0:1.0: 3 ports detected
[ 2.165846] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.171101] ohci-exynos: OHCI EXYNOS driver
[ 2.175438] exynos-ohci 12120000.usb: USB Host Controller
[ 2.180640] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[ 2.188365] exynos-ohci 12120000.usb: irq 79, io mem 0x12120000
[ 2.254637] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 2.261451] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.268916] usb usb2: Product: USB Host Controller
[ 2.273402] usb usb2: Manufacturer: Linux 5.4.77 ohci_hcd
[ 2.278772] usb usb2: SerialNumber: 12120000.usb
[ 2.283892] hub 2-0:1.0: USB hub found
[ 2.287132] hub 2-0:1.0: 3 ports detected
[ 2.293179] mousedev: PS/2 mouse device common for all mice
[ 2.298498] i2c /dev entries driver
[ 2.321939] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[ 2.338672] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[ 2.359397] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[ 2.436346] s5m-rtc s2mps14-rtc: registered as rtc0
[ 2.440325] s2mps11-clk s2mps11-clk: DMA mask not set
[ 2.447762] s5p-jpeg 11f50000.jpeg: Adding to iommu group 3
[ 2.452250] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video20
[ 2.459155] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video21
[ 2.466098] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[ 2.471752] s5p-jpeg 11f60000.jpeg: Adding to iommu group 4
[ 2.477426] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video22
[ 2.484370] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video23
[ 2.491314] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[ 2.497449] s5p-mfc 11000000.codec: Adding to iommu group 5
[ 2.520055] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[ 2.527736] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[ 2.536352] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ 2.546878] s5p-mfc 11000000.codec: decoder registered as /dev/video10
[ 2.553364] s5p-mfc 11000000.codec: encoder registered as /dev/video11
[ 2.561718] exynos-gsc 13e00000.video-scaler: Adding to iommu group 6
[ 2.567881] exynos-gsc 13e10000.video-scaler: Adding to iommu group 7
[ 2.583569] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[ 2.591006] device-mapper: uevent: version 1.0.3
[ 2.595290] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 2.619843] sdhci: Secure Digital Host Controller Interface driver
[ 2.624554] sdhci: Copyright(c) Pierre Ossman
[ 2.629064] Synopsys Designware Multimedia Card Interface Driver
[ 2.635414] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[ 2.641800] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 2.648135] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 2.653524] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 81,64 bit host data width,64 deep fifo
[ 2.662946] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[ 2.668315] mmc_host mmc0: card is non-removable.
[ 2.690305] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.711395] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[ 2.716844] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 2.723234] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 2.728616] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 82,64 bit host data width,64 deep fifo
[ 2.753131] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.768811] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
[ 2.777411] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.783780] s5p-secss 10830000.sss: s5p-sss driver registered
[ 2.788743] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.801559] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[ 2.806836] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[ 2.813421] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[ 2.820003] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[ 2.826787] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0_0)
[ 2.829256] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[ 2.833092] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[ 2.835710] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0_1)
[ 2.861879] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1_0)
[ 2.869752] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1_1)
[ 2.879218] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0
[ 2.885868] exynos-adc 12d10000.adc: IRQ index 1 not found
[ 2.896429] NET: Registered protocol family 17
[ 2.899417] NET: Registered protocol family 15
[ 2.902852] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
[ 2.904012] Key type dns_resolver registered
[ 2.917987] Registering SWP/SWPB emulation handler
[ 2.922503] registered taskstats version 1
[ 2.926443] Loading compiled-in X.509 certificates
[ 2.931351] Key type ._fscrypt registered
[ 2.932969] mmc1: new ultra high speed SDR104 SDHC card at address 0007
[ 2.935191] Key type .fscrypt registered
[ 2.942740] Key type encrypted registered
[ 2.947295] mmcblk1: mmc1:0007 SD32G 29.0 GiB
[ 2.956571] mmcblk1: p1 p2 p3
[ 2.999021] exynos-asv 10000000.chipid: cpu0 opp0, freq: 1500 missing
[ 3.004184] exynos-asv 10000000.chipid: cpu4 opp0, freq: 2100 missing
[ 3.011463] exynos-hdmi 14530000.hdmi: [drm:hdmi_probe] HDMI resource init
[ 3.013748] OF: graph: no port node found in /soc/hdmi@14530000
[ 3.020574] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[ 3.027042] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0b6da68)
[ 3.033585] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0b6e0ec)
[ 3.040471] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered.
[ 3.048380] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0b6f034)
[ 3.054890] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully
[ 3.063274] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0b6f8c0)
[ 3.070118] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.076703] [drm] No driver support for vblank timestamp query.
[ 3.082637] [drm:drm_client_modeset_probe]
[ 3.082664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[ 3.082682] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1] status updated from unknown to connected
[ 3.082948] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
[ 3.083017] [drm:drm_client_modeset_probe] No connectors reported connected with modes
[ 3.083027] [drm:drm_client_modeset_probe] connector 43 enabled? yes
[ 3.083041] [drm:drm_client_modeset_probe] Not using firmware configuration
[ 3.083053] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 43
[ 3.083062] [drm:drm_client_modeset_probe] looking for preferred mode on connector 43 0
[ 3.083071] [drm:drm_client_modeset_probe] found mode none
[ 3.083079] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config
[ 3.083096] [drm] Cannot find any crtc or sizes
[ 3.087197] [drm:drm_client_modeset_probe]
[ 3.087211] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[ 3.087441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
[ 3.087451] [drm:drm_client_modeset_probe] No connectors reported connected with modes
[ 3.087459] [drm:drm_client_modeset_probe] connector 43 enabled? yes
[ 3.087469] [drm:drm_client_modeset_probe] Not using firmware configuration
[ 3.087478] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 43
[ 3.087486] [drm:drm_client_modeset_probe] looking for preferred mode on connector 43 0
[ 3.087494] [drm:drm_client_modeset_probe] found mode none
[ 3.087502] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config
[ 3.087514] [drm] Cannot find any crtc or sizes
[ 3.092419] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
[ 3.101800] mali 11800000.gpu: GPU identified as 0x0620 r0p1 status 0
[ 3.107816] mali 11800000.gpu: Protected mode not available
[ 3.114053] mali 11800000.gpu: Probed as mali0
[ 3.119386] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
[ 3.124419] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 3.129009] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
[ 3.137060] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[ 3.146074] xhci-hcd xhci-hcd.8.auto: irq 159, io mem 0x12000000
[ 3.152628] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 3.160173] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.167363] usb usb3: Product: xHCI Host Controller
[ 3.172206] usb usb3: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.177586] usb usb3: SerialNumber: xhci-hcd.8.auto
[ 3.183128] hub 3-0:1.0: USB hub found
[ 3.186168] hub 3-0:1.0: 1 port detected
[ 3.190542] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 3.195537] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[ 3.203156] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed
[ 3.209745] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.217928] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 3.220852] devfreq 11800000.gpu: Couldn't update frequency transition information.
[ 3.225951] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.225957] usb usb4: Product: xHCI Host Controller
[ 3.225963] usb usb4: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.225968] usb usb4: SerialNumber: xhci-hcd.8.auto
[ 3.242680] hub 4-0:1.0: USB hub found
[ 3.259632] hub 4-0:1.0: 1 port detected
[ 3.266222] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
[ 3.271064] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[ 3.275829] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[ 3.283846] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[ 3.292907] xhci-hcd xhci-hcd.9.auto: irq 160, io mem 0x12400000
[ 3.299404] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 3.307014] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.314196] usb usb5: Product: xHCI Host Controller
[ 3.319047] usb usb5: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.324420] usb usb5: SerialNumber: xhci-hcd.9.auto
[ 3.329932] hub 5-0:1.0: USB hub found
[ 3.333036] hub 5-0:1.0: 1 port detected
[ 3.337294] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[ 3.342441] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[ 3.349990] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
[ 3.356574] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.364725] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 3.372786] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.379979] usb usb6: Product: xHCI Host Controller
[ 3.384819] usb usb6: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.390191] usb usb6: SerialNumber: xhci-hcd.9.auto
[ 3.395680] hub 6-0:1.0: USB hub found
[ 3.398808] hub 6-0:1.0: 1 port detected
[ 3.404344] rtc rtc1: invalid alarm value: 1900-01-01T00:00:00
[ 3.408992] s3c-rtc 101e0000.rtc: registered as rtc1
[ 3.417035] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[ 3.424996] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[ 3.432732] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
[ 3.440913] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz)
[ 3.449504] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[ 3.457997] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[ 3.465934] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[ 3.473879] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~ 67000 KHz)
[ 3.482299] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[ 3.490197] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[ 3.498653] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[ 3.506765] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[ 3.515020] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[ 3.523771] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[ 3.531984] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[ 3.541014] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[ 3.554663] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:13:20 UTC (946685600)
[ 3.610098] ALSA device list:
[ 3.611671] No soundcards found.
[ 3.618021] Freeing unused kernel memory: 1024K
[ 3.621762] Run /init as init process
[ 3.682546] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 3.707862] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3.799251] EXT4-fs (mmcblk1p3): recovery complete
[ 3.803231] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.839084] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.22
[ 3.845823] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.852918] usb 3-1: Product: USB2.0 Hub
[ 3.856816] usb 3-1: Manufacturer: GenesysLogic
[ 3.869572] /dev/loop0: Can't open blockdev
[ 3.873541] /dev/loop0: Can't open blockdev
[ 3.914868] hub 3-1:1.0: USB hub found
[ 3.917490] hub 3-1:1.0: 2 ports detected
[ 4.042631] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.069708] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=92.22
[ 4.076448] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.083543] usb 4-1: Product: USB3.0 Hub
[ 4.087446] usb 4-1: Manufacturer: GenesysLogic
[ 4.122508] hub 4-1:1.0: USB hub found
[ 4.125113] hub 4-1:1.0: 2 ports detected
[ 4.126686] [drm:drm_helper_hpd_irq_event] [CONNECTOR:43:HDMI-A-1] status updated from connected to connected
[ 4.274425] usb 3-1.1: new full-speed USB device number 3 using xhci-hcd
[ 4.380983] usb 3-1.1: New USB device found, idVendor=1915, idProduct=1047, bcdDevice= 1.78
[ 4.387894] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.395161] usb 3-1.1: Product: ZY Control
[ 4.399240] usb 3-1.1: Manufacturer: ZY.Ltd
[ 4.538610] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.564280] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 4.571097] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 4.578189] usb 6-1: Product: USB 10/100/1000 LAN
[ 4.582867] usb 6-1: Manufacturer: Realtek
[ 4.586939] usb 6-1: SerialNumber: 000001000000
[ 4.797178] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.863385] r8152 6-1:1.0 eth0: v1.10.11
[ 5.290647] udevd[227]: starting version 3.2.9
[ 5.312806] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.317910] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.324387] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.343784] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[ 5.348933] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[ 5.357700] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s
[ 5.364095] udevd[228]: starting eudev-3.2.9
[ 5.369648] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s mapping ok
[ 5.376209] odroid-audio sound: i2s-hifi <-> snd-soc-dummy-dai mapping ok
[ 5.383189] dma-pl330 3880000.adma: PM domain MAU will not be powered off
[ 5.390545] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s-sec mapping ok
[ 5.545097] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 2
[ 5.554028] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000
[ 5.560283] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000
[ 5.573099] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 5.755124] input: ZY.Ltd ZY Control as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.0/0003:1915:1047.0001/input/input1
[ 5.826838] hid-generic 0003:1915:1047.0001: input,hidraw0: USB HID v1.01 Keyboard [ZY.Ltd ZY Control] on usb-xhci-hcd.8.auto-1.1/input0
[ 5.840811] input: ZY.Ltd ZY Control Mouse as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.1/0003:1915:1047.0002/input/input2
[ 5.854572] input: ZY.Ltd ZY Control Consumer Control as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.1/0003:1915:1047.0002/input/input3
[ 5.927044] input: ZY.Ltd ZY Control System Control as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.1/3-1.1:1.1/0003:1915:1047.0002/input/input4
[ 5.941956] hid-generic 0003:1915:1047.0002: input,hiddev96,hidraw1: USB HID v1.01 Mouse [ZY.Ltd ZY Control] on usb-xhci-hcd.8.auto-1.1/input1
[ 5.954248] usbcore: registered new interface driver usbhid
[ 5.959520] usbhid: USB HID core driver
[ 6.178466] random: crng init done
[ 6.180392] random: 5 urandom warning(s) missed due to ratelimiting
[ 6.666344] Bluetooth: Core ver 2.22
[ 6.668571] NET: Registered protocol family 31
[ 6.672986] Bluetooth: HCI device and connection manager initialized
[ 6.679255] Bluetooth: HCI socket layer initialized
[ 6.684093] Bluetooth: L2CAP socket layer initialized
[ 6.689124] Bluetooth: SCO socket layer initialized
[ 6.724248] 8021q: 802.1Q VLAN Support v1.8
[ 6.750169] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.754061] Bluetooth: BNEP filters: protocol multicast
[ 6.759295] Bluetooth: BNEP socket layer initialized
[ 6.785183] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.822321] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.050576] fuse: init (API version 7.31)
[ 8.017655] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[ 8.017876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c
[ 8.541792] r8152 6-1:1.0 eth0: carrier on
[ 9.930021] NET: Registered protocol family 10
[ 9.934225] Segment Routing with IPv6
[ 10.349580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:HDMI-A-1]
[ 10.349790] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter s3c2410-i2c

@davidb2111 Hi David,

I have ordered this new PSU

https://www.amazon.co.uk/gp/product/B07P8KR2FJ/ref=ox_sc_act_title_1?smid=AMLSPJ1RPLV4S&psc=1

5V 6A Power Supply,AC100-240V to DC5V 30W Adapter

This PSU is two more amps than original PSU I have (which is the official HK 5V 4A PSU).

Once the new PSU arrives I will action the same testing and update you shortly.

Thank you for being patient

@ianmcc1 Hi there,

I tried your method but it failed, can you show me with screenshots, how to test your method please?

Thank you

@ianmcc1 ok,

Ill try this method and update you shortly.

@davidb2111 ok great.

I'm happy to do any testing for you and give log data and reports needed.

@davidb2111 OK,

I will ttry that as well, below is the output from your first request

Fresh install of 7.2
setenv videoconfig "video=HDMI-A-1:1920x1080@60"

• HTTP(s) access
• SSH access
• No image on monitor
  https://transfer.sh/D0np5/recalbox-support-8622f3eb-cfd3-b88f-97c6-e15a03732d37.tar.gz

after reboot with the resolution helper
setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"

• HTTP(s) access
• SSH access
• No image on monitor
  https://transfer.sh/zpEU2/recalbox-support-46347b43-111e-07db-6ab3-a19fa07eb1ce.tar.gz

dmesg

[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 5.4.77 (root@3f470502ff33) (gcc version 10.2.0 (Buildroot 2020.11-dirty)) #1 SMP PREEMPT Fri Apr 23 02:11:35 CEST 2021
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 128 MiB at 0xb6800000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] On node 0 totalpages: 518656
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 322048 pages, LIFO batch:63
[ 0.000000] Running under secure firmware.
[ 0.000000] percpu: Embedded 20 pages/cpu s52428 r8192 d21300 u81920
[ 0.000000] pcpu-alloc: s52428 r8192 d21300 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516928
[ 0.000000] Kernel command line: label=RECALBOX console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0 governor=performance drm_kms_helper.edid_firmware=edid/1920x1080.bin HPD=false vout=hdmi s5p_mfc.mem=16M
[ 0.000000] [drm] drm_kms_helper.edid_firmware is deprecated, please use drm.edid_firmware instead.
[ 0.000000] hdmi: using HDMI mode
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1906832K/2074624K available (10240K kernel code, 781K rwdata, 2748K rodata, 1024K init, 323K bss, 36720K reserved, 131072K cma-reserved, 1157120K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x330/0x50c with crng_init=0
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000030] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[ 0.001639] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.001658] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.001679] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001692] Ignoring duplicate/late registration of read_current_timer delay
[ 0.002228] Console: colour dummy device 80x30
[ 0.002270] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.002286] pid_max: default: 32768 minimum: 301
[ 0.002486] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002510] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.003583] CPU: Testing write buffer coherency: ok
[ 0.004157] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.005046] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.005335] ARM CCI driver probed
[ 0.005900] Exynos MCPM support installed
[ 0.006177] rcu: Hierarchical SRCU implementation.
[ 0.008627] soc soc0: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422001] REV[0x1] Detected
[ 0.009123] smp: Bringing up secondary CPUs ...
[ 0.010079] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.011146] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.012157] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.013207] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.013216] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.014349] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.014357] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.015460] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.015468] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.016590] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.016598] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.016788] smp: Brought up 1 node, 8 CPUs
[ 0.016806] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.016814] CPU: All CPU(s) started in HYP mode.
[ 0.016821] CPU: Virtualization extensions available.
[ 0.017918] devtmpfs: initialized
[ 0.036871] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.037324] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.037345] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.039789] pinctrl core: initialized pinctrl subsystem
[ 0.042119] NET: Registered protocol family 16
[ 0.045203] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.046590] audit: initializing netlink subsys (disabled)
[ 0.046800] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
[ 0.047500] cpuidle: using governor menu
[ 0.047870] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.047882] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.112593] EXYNOS5420 PMU initialized
[ 0.226834] iommu: Default domain type: Translated
[ 0.227286] usbcore: registered new interface driver usbfs
[ 0.227343] usbcore: registered new interface driver hub
[ 0.227484] usbcore: registered new device driver usb
[ 0.228083] s3c-i2c 12c80000.i2c: slave address 0x00
[ 0.228101] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[ 0.228353] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[ 0.228887] mc: Linux media interface: v0.10
[ 0.228934] videodev: Linux video capture interface: v2.00
[ 0.229045] pps_core: LinuxPPS API ver. 1 registered
[ 0.229055] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.229477] Advanced Linux Sound Architecture Driver Initialized.
[ 0.230286] clocksource: Switched to clocksource mct-frc
[ 0.270317] random: fast init done
[ 0.955355] VFS: Disk quotas dquot_6.6.0
[ 0.955429] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.966387] thermal_sys: Registered thermal governor 'step_wise'
[ 0.968641] NET: Registered protocol family 2
[ 0.969305] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.969339] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.969419] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.969577] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.969683] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.969729] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.969954] NET: Registered protocol family 1
[ 0.970795] RPC: Registered named UNIX socket transport module.
[ 0.970808] RPC: Registered udp transport module.
[ 0.970819] RPC: Registered tcp transport module.
[ 0.970830] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.971051] Trying to unpack rootfs image as initramfs...
[ 0.979471] Freeing initrd memory: 1264K
[ 0.980905] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.981652] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.985528] Initialise system trusted keyrings
[ 0.985767] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.994726] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.995527] NFS: Registering the id_resolver key type
[ 0.995557] Key type id_resolver registered
[ 0.995568] Key type id_legacy registered
[ 0.995590] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.995632] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.026557] Key type asymmetric registered
[ 1.026572] Asymmetric key pa**er 'x509' registered
[ 1.026631] bounce: pool size: 64 pages
[ 1.026670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.026922] io scheduler mq-deadline registered
[ 1.026935] io scheduler kyber registered
[ 1.027070] io scheduler bfq registered
[ 1.029522] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[ 1.030538] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[ 1.030636] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[ 1.030999] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[ 1.031087] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[ 1.039415] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[ 1.039433] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.041958] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[ 1.041975] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.042854] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[ 1.042870] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 1.111065] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.113283] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 62, base_baud = 0) is a S3C6400/10
[ 1.981048] printk: console [ttySAC2] enabled
[ 1.987027] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[ 1.993344] exynos-mixer 14450000.mixer: Adding to iommu group 0
[ 2.001017] exynos-drm-g2d 10850000.g2d: Adding to iommu group 1
[ 2.007069] exynos-rotator 11c00000.rotator: Adding to iommu group 2
[ 2.019308] mali 11800000.gpu: Failed to get regulator
[ 2.023002] mali 11800000.gpu: Power control initialization failed
[ 2.039674] brd: module loaded
[ 2.055525] loop: module loaded
[ 2.057959] libphy: Fixed MDIO Bus: probed
[ 2.061615] usbcore: registered new interface driver r8152
[ 2.066797] usbcore: registered new interface driver cdc_ether
[ 2.072594] usbcore: registered new interface driver cdc_subset
[ 2.080613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.085702] ehci-exynos: EHCI EXYNOS driver
[ 2.090207] exynos-ehci 12110000.usb: EHCI Host Controller
[ 2.095334] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[ 2.103254] exynos-ehci 12110000.usb: irq 79, io mem 0x12110000
[ 2.122337] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 2.127155] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 2.135134] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.142319] usb usb1: Product: EHCI Host Controller
[ 2.147170] usb usb1: Manufacturer: Linux 5.4.77 ehci_hcd
[ 2.152541] usb usb1: SerialNumber: 12110000.usb
[ 2.157699] hub 1-0:1.0: USB hub found
[ 2.160902] hub 1-0:1.0: 3 ports detected
[ 2.165746] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.171013] ohci-exynos: OHCI EXYNOS driver
[ 2.175345] exynos-ohci 12120000.usb: USB Host Controller
[ 2.180546] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[ 2.188279] exynos-ohci 12120000.usb: irq 79, io mem 0x12120000
[ 2.254565] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 2.261380] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.268865] usb usb2: Product: USB Host Controller
[ 2.273332] usb usb2: Manufacturer: Linux 5.4.77 ohci_hcd
[ 2.278702] usb usb2: SerialNumber: 12120000.usb
[ 2.283839] hub 2-0:1.0: USB hub found
[ 2.287061] hub 2-0:1.0: 3 ports detected
[ 2.293127] mousedev: PS/2 mouse device common for all mice
[ 2.298435] i2c /dev entries driver
[ 2.323521] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[ 2.340909] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[ 2.361617] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[ 2.440971] s5m-rtc s2mps14-rtc: registered as rtc0
[ 2.444953] s2mps11-clk s2mps11-clk: DMA mask not set
[ 2.452354] s5p-jpeg 11f50000.jpeg: Adding to iommu group 3
[ 2.456845] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video20
[ 2.463758] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video21
[ 2.470690] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[ 2.476333] s5p-jpeg 11f60000.jpeg: Adding to iommu group 4
[ 2.482020] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video22
[ 2.488968] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video23
[ 2.495906] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[ 2.502049] s5p-mfc 11000000.codec: Adding to iommu group 5
[ 2.524600] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[ 2.532284] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[ 2.540892] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ 2.551431] s5p-mfc 11000000.codec: decoder registered as /dev/video10
[ 2.557899] s5p-mfc 11000000.codec: encoder registered as /dev/video11
[ 2.566254] exynos-gsc 13e00000.video-scaler: Adding to iommu group 6
[ 2.572417] exynos-gsc 13e10000.video-scaler: Adding to iommu group 7
[ 2.588159] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[ 2.595597] device-mapper: uevent: version 1.0.3
[ 2.599875] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 2.624357] sdhci: Secure Digital Host Controller Interface driver
[ 2.629068] sdhci: Copyright(c) Pierre Ossman
[ 2.633579] Synopsys Designware Multimedia Card Interface Driver
[ 2.639936] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[ 2.646349] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 2.652642] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 2.658036] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 81,64 bit host data width,64 deep fifo
[ 2.667459] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[ 2.672831] mmc_host mmc0: card is non-removable.
[ 2.694060] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.715159] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[ 2.720610] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 2.727003] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 2.732383] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 82,64 bit host data width,64 deep fifo
[ 2.756895] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.772418] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
[ 2.780983] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.787530] s5p-secss 10830000.sss: s5p-sss driver registered
[ 2.792562] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.805127] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[ 2.810466] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[ 2.816974] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[ 2.823562] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[ 2.830390] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0_0)
[ 2.832253] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[ 2.835797] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[ 2.839192] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0_1)
[ 2.849862] mmc1: new ultra high speed SDR104 SDHC card at address 0007
[ 2.858161] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1_0)
[ 2.866832] mmcblk1: mmc1:0007 SD32G 29.0 GiB
[ 2.872704] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1_1)
[ 2.883925] mmcblk1: p1 p2 p3
[ 2.894735] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0
[ 2.895560] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
[ 2.906212] exynos-adc 12d10000.adc: IRQ index 1 not found
[ 2.923342] NET: Registered protocol family 17
[ 2.926355] NET: Registered protocol family 15
[ 2.930783] Key type dns_resolver registered
[ 2.935367] Registering SWP/SWPB emulation handler
[ 2.939874] registered taskstats version 1
[ 2.943821] Loading compiled-in X.509 certificates
[ 2.948687] Key type ._fscrypt registered
[ 2.952571] Key type .fscrypt registered
[ 2.957250] Key type encrypted registered
[ 2.993458] exynos-asv 10000000.chipid: cpu0 opp0, freq: 1500 missing
[ 2.998480] exynos-asv 10000000.chipid: cpu4 opp0, freq: 2100 missing
[ 3.008082] OF: graph: no port node found in /soc/hdmi@14530000
[ 3.014806] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[ 3.021268] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0b6da68)
[ 3.027818] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0b6e0ec)
[ 3.034697] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered.
[ 3.042599] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0b6f034)
[ 3.049110] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully
[ 3.057496] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0b6f8c0)
[ 3.064341] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.070925] [drm] No driver support for vblank timestamp query.
[ 3.077186] [drm] Cannot find any crtc or sizes
[ 3.082089] [drm] Cannot find any crtc or sizes
[ 3.086394] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
[ 3.096066] mali 11800000.gpu: GPU identified as 0x0620 r0p1 status 0
[ 3.102025] mali 11800000.gpu: Protected mode not available
[ 3.108147] mali 11800000.gpu: Probed as mali0
[ 3.113237] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
[ 3.118138] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 3.122860] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
[ 3.130850] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[ 3.139904] xhci-hcd xhci-hcd.8.auto: irq 159, io mem 0x12000000
[ 3.146411] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 3.154020] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.161210] usb usb3: Product: xHCI Host Controller
[ 3.166061] usb usb3: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.171434] usb usb3: SerialNumber: xhci-hcd.8.auto
[ 3.176870] hub 3-0:1.0: USB hub found
[ 3.180052] hub 3-0:1.0: 1 port detected
[ 3.184277] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 3.189379] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[ 3.197005] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed
[ 3.203610] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.211740] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 3.214554] devfreq 11800000.gpu: Couldn't update frequency transition information.
[ 3.219806] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.219812] usb usb4: Product: xHCI Host Controller
[ 3.219817] usb usb4: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.219822] usb usb4: SerialNumber: xhci-hcd.8.auto
[ 3.234553] hub 4-0:1.0: USB hub found
[ 3.253474] hub 4-0:1.0: 1 port detected
[ 3.259807] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
[ 3.264517] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[ 3.269406] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[ 3.277387] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[ 3.286468] xhci-hcd xhci-hcd.9.auto: irq 160, io mem 0x12400000
[ 3.292895] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 3.300587] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.307787] usb usb5: Product: xHCI Host Controller
[ 3.312628] usb usb5: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.318000] usb usb5: SerialNumber: xhci-hcd.9.auto
[ 3.323394] hub 5-0:1.0: USB hub found
[ 3.326608] hub 5-0:1.0: 1 port detected
[ 3.330821] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[ 3.335946] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[ 3.343569] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
[ 3.350165] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.358331] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 3.366355] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.373546] usb usb6: Product: xHCI Host Controller
[ 3.378414] usb usb6: Manufacturer: Linux 5.4.77 xhci-hcd
[ 3.383770] usb usb6: SerialNumber: xhci-hcd.9.auto
[ 3.389158] hub 6-0:1.0: USB hub found
[ 3.392378] hub 6-0:1.0: 1 port detected
[ 3.397598] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[ 3.401969] rtc rtc1: invalid alarm value: 1900-01-15T00:00:00
[ 3.407793] s3c-rtc 101e0000.rtc: registered as rtc1
[ 3.415430] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[ 3.423239] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[ 3.430993] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
[ 3.439247] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz)
[ 3.447726] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[ 3.456197] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[ 3.464144] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[ 3.471877] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~ 67000 KHz)
[ 3.480484] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[ 3.488415] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[ 3.496818] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[ 3.504959] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[ 3.513222] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[ 3.521987] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[ 3.530254] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[ 3.539274] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[ 3.552579] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:00:08 UTC (946684808)
[ 3.608139] ALSA device list:
[ 3.609644] No soundcards found.
[ 3.616315] Freeing unused kernel memory: 1024K
[ 3.622979] Run /init as init process
[ 3.674674] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 3.704941] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=92.22
[ 3.711692] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.719757] usb 4-1: Product: USB3.0 Hub
[ 3.722712] usb 4-1: Manufacturer: GenesysLogic
[ 3.728146] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3.748524] hub 4-1:1.0: USB hub found
[ 3.751248] hub 4-1:1.0: 2 ports detected
[ 3.817580] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.826335] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 3.869025] /dev/loop0: Can't open blockdev
[ 3.872319] /dev/loop0: Can't open blockdev
[ 3.982751] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.22
[ 3.989463] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.996596] usb 3-1: Product: USB2.0 Hub
[ 4.000471] usb 3-1: Manufacturer: GenesysLogic
[ 4.068143] hub 3-1:1.0: USB hub found
[ 4.070731] hub 3-1:1.0: 2 ports detected
[ 4.538424] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.563286] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 4.570003] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 4.577103] usb 6-1: Product: USB 10/100/1000 LAN
[ 4.581777] usb 6-1: Manufacturer: Realtek
[ 4.585850] usb 6-1: SerialNumber: 000001000000
[ 4.662299] dwmmc_exynos 12220000.mmc: Unexpected command timeout, state 3
[ 4.806937] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.880599] r8152 6-1:1.0 eth0: v1.10.11
[ 5.244407] udevd[230]: starting version 3.2.9
[ 5.268181] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.273276] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.279783] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.303894] udevd[231]: starting eudev-3.2.9
[ 5.344451] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[ 5.349620] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[ 5.358681] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s
[ 5.369874] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s mapping ok
[ 5.375586] odroid-audio sound: i2s-hifi <-> snd-soc-dummy-dai mapping ok
[ 5.383428] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s-sec mapping ok
[ 5.389778] dma-pl330 3880000.adma: PM domain MAU will not be powered off
[ 5.543130] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 2
[ 5.549424] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000
[ 5.557055] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000
[ 5.564437] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 5.858339] random: crng init done
[ 5.860259] random: 3 urandom warning(s) missed due to ratelimiting
[ 6.476816] Bluetooth: Core ver 2.22
[ 6.479503] NET: Registered protocol family 31
[ 6.483510] Bluetooth: HCI device and connection manager initialized
[ 6.489711] Bluetooth: HCI socket layer initialized
[ 6.494540] Bluetooth: L2CAP socket layer initialized
[ 6.499591] Bluetooth: SCO socket layer initialized
[ 6.520896] 8021q: 802.1Q VLAN Support v1.8
[ 6.558511] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.562380] Bluetooth: BNEP filters: protocol multicast
[ 6.567585] Bluetooth: BNEP socket layer initialized
[ 6.592365] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.645281] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.743287] r8152 6-1:1.0 eth0: carrier on
[ 6.877096] fuse: init (API version 7.31)
[ 9.812400] usbcore: registered new interface driver usbhid
[ 9.816572] usbhid: USB HID core driver
[ 10.231599] NET: Registered protocol family 10
[ 10.235721] Segment Routing with IPv6
[ 33.759599] vdd_ldo12: disabling

@davidb2111 Ok,

https://www.mediafire.com/file/rx3eq90mfkpcgqx/boot.ini/file

Boot.ini in plain text
//////////////////////////////////////////////////////////////////////////
ODROIDXU-UBOOT-CONFIG

U-Boot Parameters (DO NOT MODIFY)

setenv version 4.14
setenv zimage boot/linux
setenv fdtbin boot/exynos5422-odroidxu4.dtb
setenv uInitrd boot/uInitrd

--- Screen Configuration for HDMI ---

---------------------------------------

Uncomment only ONE line! Leave all commented for automatic selection.

Uncomment only the setenv line!

---------------------------------------

ODROID-VU forced resolution

setenv videoconfig "video=HDMI-A-1:1280x800@60"

-----------------------------------------------

ODROID-VU forced EDID

setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin"

-----------------------------------------------

1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)

#############################setenv videoconfig "video=HDMI-A-1:1920x1080@60"

-----------------------------------------------

1920x1080 (1080P) without monitor data using generic information (1080p-noedid)

#############################setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"

-----------------------------------------------

1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)

#############################setenv videoconfig "video=HDMI-A-1:1920x1080@50"

-----------------------------------------------

1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)

#############################setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"

-----------------------------------------------

1440x900 with monitor provided EDID information.

setenv videoconfig "video=HDMI-A-1:1440x900@60"

-----------------------------------------------

1440x900 without monitor data using generic information

setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin"

-----------------------------------------------

1280x1024 without monitor data using generic information

#############################setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin"

-----------------------------------------------

1280x720 (720P) with monitor provided EDID information. (720p-edid)

#############################setenv videoconfig "video=HDMI-A-1:1280x720@60"

-----------------------------------------------

1280x720 (720P) without monitor data using generic information (720p-noedid)

#############################setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"

-----------------------------------------------

1024x768 without monitor data using generic information

setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"

-----------------------------------------------

1024x600 without monitor data using generic information (ODROID VU7+)

setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin"

-----------------------------------------------

800x600 without monitor data using generic information

setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin"

-----------------------------------------------

800x480 without monitor data using generic information (ODROID 7")

setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin"

-----------------------------------------------

720x576 without monitor data using generic information

#############################setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"

-----------------------------------------------

720x480 without monitor data using generic information

#############################setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"

-----------------------------------------------

640x480 without monitor data using generic information

setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"

--- HDMI / DVI Mode Selection ---

------------------------------------------

- HDMI Mode

setenv vout "hdmi"

- DVI Mode (disables sound over HDMI as per DVI compat)

setenv vout "dvi"

--- CPU Governor Setup ---

Uncomment only one line. New governor is set after 90secs after boot.

------------------------------------------

- Performance (Keep all the CPU's at Maximum frequency)

setenv governor "performance"

------------------------------------------

- Ondemand

setenv governor "ondemand"

------------------------------------------

- Interactive (Pretty much just like ondemand with more possible customization via sysfs.)

setenv governor "interactive"

------------------------------------------

- Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications)

setenv governor "conservative"

------------------------------------------

- Powersave (Keeps the CPU's to the lowest possible temps)

setenv governor "powersave"

--- HDMI CEC Configuration ---

------------------------------------------

setenv cecenable "false" # false or true

set to true to enable HDMI CEC

#------------------------------------------------------------------------------

HDMI Hot Plug detection

#------------------------------------------------------------------------------

Forces the HDMI subsystem to ignore the check if the cable is connected or

not.

false : disable the detection and force it as connected.

true : let cable, board and monitor decide the connection status.

default: true

#------------------------------------------------------------------------------
setenv HPD "false"
setenv hdmi_phy_control "HPD=${HPD} vout=${vout}"

setenv zimage_addr_r 0x40008000
setenv uInitrd_addr_r 0x42000000
setenv fdtbin_addr_r 0x44000000

setenv fdt_high "0xffffffff"

DRAM Frequency (lpddr3 available frequency list - 933/825/728/633)

setenv ddr_freq 933

set DDR frequency

dmc ${ddr_freq}

Default boot arguments

setenv bootrootfs "label=RECALBOX"
setenv console "console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0"

boot commands

fatload mmc 0:1 ${zimage_addr_r} ${zimage}
fatload mmc 0:1 ${uInitrd_addr_r} ${uInitrd}
fatload mmc 0:1 ${fdtbin_addr_r} ${fdtbin}

fdt addr 0x44000000
if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi

setenv bootargs "${bootrootfs} ${console} governor=${governor} ${videoconfig} ${hdmi_phy_control}"

bootz ${zimage_addr_r} ${uInitrd_addr_r} ${fdtbin_addr_r}
//////////////////////////////////////////////////////////////////////////

@davidb2111 Hi there,

sorry I took too much time to reply here's my testing

• New sandisk 64GB SD Card
• New Belkin 4K HDMI Cable (Model 4320F3 - 7100-00567 Rev A00)
• Flashed recalbox 7.2 (No upgrade, just 7.2 flash/install directly)
• Using 20" Acer 1920x1080p 60Hz Monitor
• Set each resolution tested with Log

setenv videoconfig "video=HDMI-A-1:1920x1080@60"

• SSH access works
• HTTP(s) access works
• No image on screen, nothing displayed
  https://transfer.sh/kGHcM/recalbox-support-cb95ef47-1c57-d2d7-2cc8-b59ea907511c.tar.gz

setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"

• SSH access works
• HTTP(s) access works
• No image on screen, nothing displayed
  https://transfer.sh/TJVFT/recalbox-support-ac24381f-1111-8a8a-5dd7-5b3f5737be9a.tar.gz

setenv videoconfig "video=HDMI-A-1:1920x1080@50"

• SSH access works
• HTTP(s) access works
• No image on screen, nothing displayed
  https://transfer.sh/10fRfR/recalbox-support-b11f7322-78ae-f044-e4e3-66c5ca683328.tar.gz

setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"

• SSH access works
• HTTP(s) access works
• No image on screen, nothing displayed
  https://transfer.sh/TWIux/recalbox-support-bd374e79-da9e-042d-b3a3-de5c928fc23b.tar.gz

setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin"

• SSH access works
• HTTP(s) access works
• No image on screen, nothing displayed
  https://transfer.sh/8LBdu/recalbox-support-72515c92-f911-2933-28a8-4d9f735900db.tar.gz

setenv videoconfig "video=HDMI-A-1:1280x720@60"

• SSH access works
• HTTP(s) access works
• No image on screen, nothing displayed
  https://transfer.sh/SXNCU/recalbox-support-1be7e3e6-d023-059b-dde7-e37efc280ed5.tar.gz

setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"

• SSH access works
• HTTP(s) access works
• No image on screen, nothing displayed
  https://transfer.sh/CL5Gk/recalbox-support-75af2efb-d81b-cd53-78d9-257bc9f117c1.tar.gz

setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"

• SSH access works
• HTTP(s) access works
• No image on screen, nothing displayed
  https://transfer.sh/10k8RV/recalbox-support-a2129376-9f98-6c3e-ac13-d7d41b7db75f.tar.gz

setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"

• SSH access works
• HTTP(s) access works
• No image on screen, nothing displayed
  https://transfer.sh/V9jvM/recalbox-support-915f5e68-1a37-b597-543a-dcab2c14ad42.tar.gz

setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"

• SSH access works
• HTTP(s) access works
• No image on screen, nothing displayed
  https://transfer.sh/jGwkG/recalbox-support-e1b6d979-b576-ab0e-2e4b-f9166456fed4.tar.gz

setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"

• SSH access works
• HTTP(s) access works
• No image on screen, nothing displayed
  https://transfer.sh/c3Llo/recalbox-support-4641427e-ef07-57cc-251a-ba0c24be052d.tar.gz

@davidb2111 Standby, I will test now and update you.

@davidb2111 Hi there,

So I went to the supermarket and bought two new HDMI cables and below is the updates/findings

7.1.1 - support log
https://transfer.sh/XueTC/recalbox-support-ba4a9e52-aaa1-2854-2b91-0758f2c8c3cc.tar.gz

• New Belkin 4K HDMI Cable (Model 4320F3 - 7100-00567 Rev A00)
• Working with no issue
• Set resolution to 720x480

7.2 - support log
After offline upgrade
https://transfer.sh/K6D3A/recalbox-support-97776b2d-3f33-2d18-173c-79d86d43d92d.tar.gz

• Same new Belkin 4K HDMI Cable (Model 4320F3 - 7100-00567 Rev A00)

• No screen

• Set resolution to 640x480, 720x480, 720x576, 1920x1080
  setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
  setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"
  setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"
  setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"

• Tried a second HDMI cable

• Tried on Samsung 55" TV

• Tried on Scer 20" monitor with new HDMI cable

• Still no image on all screens I tried.
  BUT

• Can access recalbox via network (using web browser to access recalbox manager)

Proof of setup (just a testing monitor)
[img]https://i.imgur.com/Y5umnch.jpg[/img]

Proof of boot up working on 7.1.1
[img]https://i.imgur.com/naEdCVr.jpg[/img]

Proof of update
[img]https://i.imgur.com/MyKKhb0.jpg[/img]

Proof of update running
[img]https://i.imgur.com/tY05tPf.jpg[/img]

Failure when on 7.2
[img]https://i.imgur.com/BwJNSKR.jpg[/img]

@davidb2111 Hi there!

I have the xU4 with the heatsink and Fan; the boot.ini file, I edited to this setting

I hashed out that line you have and the below is configured

#setenv videoconfig "video=HDMI-A-1:1920x1080@60"
setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"

Thank you

I upgraded again just to make sure and the there's no ouput

here's ythe support log.

https://transfer.sh/1lJkT/recalbox-support-507e3721-dcba-248a-c279-6fae310fee53.tar.gz

After upgrading to to 7.2 on the Odroid XU4, there's no output to the monitor via HDMI, I have web GUI and SSH access but I cannot get any image outpt to the screen.

I went back to 7.1.1 and screen output is back.

Please let me know what I can do to help diagnose the problem,

I also have teh support log data if you need me to upload it as well.

https://file.io/F6ca1VgLCmLm

Thank you