@Zing
thanks for the guidance, resolved, it wasn't as described in the forum but I had a light as I couldn't see the video output by xrandr, and somewhere in a post they mentioned that they modified the .xinitrc, I decided to do it and it worked, disabling the output LVDS1

to disable a video output (multi-screen setup) and prevent ES to be stretcht on all screens,

uncomment the line below, and replace output_name by the output that you want to disable on ES startup (ex: HDMI-0)

xrandr --output LVDS1 --off

Force Display Output 1280x720

xrandr -s 1280x720

I enter the terminal to execute the command and I encounter this error

xrandr

Can't open display

and I cannot proceed with the described process

I did the test, restarting the pc without the monitor connected and after the recalbox started I connected the cable again and to my surprise the screen was filled, but when restarting again with the cable connected the screen is cut again ...: (

would there be any solution to fill the screen? notebook with HDMI video output using VGA converter

@RESOLVIDO:

Primeiro ALT + F2

logon:
senha root : recalboxroot

mount -o remount, rw /
então
mv /etc/init.d/S03splash /etc/init.d/splash
após a
reinicialização

Após a reinicialização, ele deve começar normalmente.

Hello Companions
I'm migrating from batocera to recalbox (PC) but when finishing the installation and when I do the second boot on the pc to change the language the recalbox hangs at the beginning of the boot in the image where the description of the version and the characters of pac-man appear, ja tried on several pen-drives and hd's always the same problem ,,, is there any solution? my pc and an i3 2.7ghz 4gb Ram GPU intela HD 4000 integrated