Posts made by Asirome

Hello @scavy,

FB Neo runs slow if the ROM set is incorrect?

@zing ??

Hi,

I have installed Recalbox 8.1 on a Rasberry 3B+ and I have detected that some games like Golden Axe 1 and 2 doesn't run at full speed with the default settings for FB Neo.

The same games works fine with the same hardware with Batocera v34.

Hi @Schattenwesen

In the Vice documentation exists an option to autostart programs from the command-line

https://vice-emu.sourceforge.io/vice_3.html#SEC24

But I don't now if there is a way to do it from Recalbox.

Hi,

I have tried these cores:

• Libretro Vice_x64 (default)
• Libretro Vice_x64SC
• Libretro Vice_x128
• Libretro Vice_xscpu64

no one worked with compressed roms in 7z

@olivierdroid92 said in Commodore 64 and 7zip:

Hi
On my pi4
D64 CRT and T64 works correctly for me

Yes, like me.

The question is if the rom can be packed in 7zip, like zip.

sorry .trd -> .crt

I have tested the default core from a fresh installation of Recalbox 7.1.1 in a Rasp 4B. (Libretro - vice_x64)

I have tested .d64, .trd and .t64 extensions.

Hi!

In recalbox 6.x, as far I can remember, the roms packed with 7zip worked fine, but in Recalbox 7.1.1 don't work.

I have checked with zip packed files and rom files worked fine.

Regards!

Hi @garmadon,

I don't have tested these other systems, I will do in a few days.

Here is my "es_log.txt" file:

https://pastebin.com/yU2Lwhk4

Hi,

The Wonderswan emulator runs at full speed in a pc x64 system. I have tested the same emulator settings in a rp3b+ and works fine.

Hi,

The x68000 emulator doesn't work in the pc x64 version, I have tested zip, dim, 7z, and hdf files and the emulator fails to start.

I have the same Recalbox version in a rb3b+ and works fine with the same Bios files and roms.

Hi everyone,

I don't know if there is the correct place to post this...

I have created some bootable IMG hard disk images that can be attached to the ACSI port for hard drivers.

There is a way for Recalbox to pass these images to the hatari emulator through retroarch/libretro with the --acsi parameter to boot from hard disk?

Thanks!

@chris72 many thanks! I read in the documentation something like that, but I don't know the exact location and the name of the filename to do it.

@acris maybe in the next release will be support for 7z?

thanks!

Hi,

Thanks for your work in recalbox! it's a nice project.

I have some questions for the amiberry emulator in recalbox:

• How I can save a custom setting for a game or general change in the emulator? I have changed some configuration in the UAE config screen, clicked on all 'save' buttons that I have found, but the settings seems not permanetly.

• Another question is the .7z support, with .zip and whdload games, works fine, but with .7z and whdload a write protected disk message appears in the amiberry, and the game is not running.

system: Raspberry 3B+

maybe I'm doing something wrong?

thanks!

I have tested two USB joysticks:

	<inputConfig type="joystick" deviceName="BSGPAC02 Series" deviceGUID="03000000d81d00000e00000010010000" deviceNbAxes="4" deviceNbHats="1" deviceNbButtons="13">
		<input name="a" type="button" id="1" value="1" code="305" />
		<input name="b" type="button" id="0" value="1" code="304" />
		<input name="down" type="axis" id="1" value="1" code="1" />
		<input name="hotkey" type="button" id="8" value="1" code="312" />
		<input name="l2" type="button" id="7" value="1" code="311" />
		<input name="l3" type="button" id="10" value="1" code="314" />
		<input name="left" type="axis" id="0" value="-1" code="0" />
		<input name="pagedown" type="button" id="2" value="1" code="306" />
		<input name="pageup" type="button" id="6" value="1" code="310" />
		<input name="r2" type="button" id="3" value="1" code="307" />
		<input name="r3" type="button" id="11" value="1" code="315" />
		<input name="right" type="axis" id="0" value="1" code="0" />
		<input name="select" type="button" id="8" value="1" code="312" />
		<input name="start" type="button" id="9" value="1" code="313" />
		<input name="up" type="axis" id="1" value="-1" code="1" />
		<input name="x" type="button" id="5" value="1" code="309" />
		<input name="y" type="button" id="4" value="1" code="308" />
	</inputConfig>

<inputConfig type="joystick" deviceName="PS3/PC Gamepad" deviceGUID="03000000100800000300000010010000" deviceNbAxes="5" deviceNbHats="1" deviceNbButtons="12">
		<input name="a" type="button" id="2" value="1" code="290" />
		<input name="b" type="button" id="6" value="1" code="294" />
		<input name="down" type="axis" id="1" value="1" code="1" />
		<input name="hotkey" type="button" id="8" value="1" code="296" />
		<input name="l2" type="button" id="5" value="1" code="293" />
		<input name="left" type="axis" id="0" value="-1" code="0" />
		<input name="pagedown" type="button" id="1" value="1" code="289" />
		<input name="pageup" type="button" id="0" value="1" code="288" />
		<input name="r2" type="button" id="7" value="1" code="295" />
		<input name="right" type="axis" id="0" value="1" code="0" />
		<input name="select" type="button" id="8" value="1" code="296" />
		<input name="start" type="button" id="9" value="1" code="297" />
		<input name="up" type="axis" id="1" value="-1" code="1" />
		<input name="x" type="button" id="3" value="1" code="291" />
		<input name="y" type="button" id="4" value="1" code="292" />
	</inputConfig> 

with this last joystick, select + start doesn't exit on amiberry emulator.

Hi, the overlay or label png image is not showing in the amiga amiberry emulator, (Xmas versión worked fine)

file:
/SHARE/system/configs/retroarch/amiga1200.cfg
input_overlay = "/recalbox/share/system/configs/retroarch/overlays/amiga_overlay.cfg"
custom_viewport_width = "936"
custom_viewport_height = "707"
custom_viewport_x = "166"
custom_viewport_y = "7"
video_message_pos_x = "0.134645669291339"
video_message_pos_y = "0.0652777777777778"

file:
/SHARE/system/configs/retroarch/overlays/amiga_overlay.cfg
overlays = 1
overlay0_overlay = amiga.png
overlay0_full_screen = true
overlay0_descs = 0

Also SELECT+START or SELECT+B buttons don't exit or show the config from the emulator, maybe I have missed some configuration?

The background music enters in a loop when you exit from any emulator and you don't move from the current game selection screen. (Xmas version had the same problem)

Joystick: PS3/PC Gamepad
System: r3b+

Hi, Sorry, the bios file names are incorrect, the proper ones are:

CRC32
kick02019.AROS.rom 786D1739
kick02019.AROS.ext.rom 805FB428
kick33180.A500.rom A6CE1636
kick34005.A500.rom C4F0F55F
kick37175.A500.rom C3BDB240
kick39106.A1200.rom 6C9B07D2
kick40060.CD32.rom 1E62D4A5
kick40060.CD32.ext.rom 87746BE2
kick40063.A600.rom FC24AE0D
kick40068.A1200.rom 1483A091
kick40068.A4000.rom D6BAE334

I have fixed the bios file names and the emulator works fine again

Hi, I'm testing the amiga 1200, I have added these bios:

CRC32:
kick33180.A500 A6CE1636
kick34005.A500 C4F0F55F
kick37175.A500 C3BDB240
kick39106.A1200 6C9B07D2
kick40063.A600 FC24AE0D
kick40068.A1200 1483A091
kick40068.A4000 D6BAE334

MD5
85ad74194e87c08904327de1a9443b7a *kick33180.A500
82a21c1890cae844b3df741f2762d48d *kick34005.A500
dc10d7bdd1b6f450773dfb558477c230 *kick37175.A500
b7cc148386aa631136f510cd29e42fc3 *kick39106.A1200
e40a5dfb3d017ba8779faba30cbd1c8e *kick40063.A600
646773759326fbac3b2311fd8c8793ee *kick40068.A1200
9bdedde6a4f33555b4a270c8ca53297d *kick40068.A4000

but the emulator doesn't start

tested with: [GAME].uae and [GAME].zip in the amiga1200 rom folder (the Christmas version worked fine)

ES_log:
Traceback (most recent call last):
File "usr/lib/python2.7/site-packages/configgen/emulatorlauncher.py", line 249, in <module>
exitcode = main(args)
File "usr/lib/python2.7/site-packages/configgen/emulatorlauncher.py", line 174, in main
command = generators[system.config['emulator']].generate(system, args.rom, playersControllers)
File "/usr/lib/python2.7/site-packages/configgen/generators/amiberry/amiberryGenerator.py", line 228, in generate
configFile.saveConfigFile()
File "/usr/lib/python2.7/site-packages/configgen/generators/amiberry/amiberryConfig.py", line 23, in saveConfigFile
self.settings.saveFile()
File "/usr/lib/python2.7/site-packages/configgen/settings/keyValueSettings.py", line 45, in saveFile
sf.write(key + "=" + self.settings[key] + '\n')
TypeError: cannot concatenate 'str' and 'NoneType' objects

System: Raspberry 3b+