@zing I'm a little confused as the RPi1 and Pi zero still appear to currently be supported at 8.1.1 but with much lesser hardware? But not RPi2 ?

I don't understand?

@zing I'm a little confused as the RPi1 and Pi zero still appear to currently be supported at 8.1.1 but with much lesser hardware? But not RPi2 ?

I don't understand?

@zing OK thanks I suspected that was the case.

Is there a reason Rpi2 does not support the current version Recalbox 8.1?

Will the Rpi2 also not support future versions of Recalbox? Thanks

@alvin OK thanks

After many reboots it seems the issue has finally cleared itself and the system now seems stable.

I have now noticed another issue that the system shows no updates available. Why is the 8.0.2 update not showing?

Hi, RPi2 running RB8.0.1 was working ok until I decided to try overclocking to see the difference. Set to the first OC level I think 1050Mhz to see. Since then the system is completely unstable (sometimes does not complete boot). I am unable to access the system menu to revert back to standard (it crashes). Can I edit the config file via ssh etc to correct the issue or what else do I do? Thanks.

Hi, Recalbox 7.2.2 installed.

I'm trying to set Static IP following instructions here for v6.1 https://recalbox.gitbook.io/documentation/tutorials/network/ip/manual-ip-settings

I edited the recalbox.conf file but the IP remains dhcp and also breaks the hostname which reverts to RECALBOX.

Any ideas? Thanks.

The fan speed is Pulse Width Modulation (PWM) controlled on GPIO14. This is software controlled by the system so the software will need to support this.

I'll order one to test and will report back.

@zing Hi Thanks.

My understanding is that the fan speed is controlled by output on GPIO 14. Is it possible that this will work?

HI,
Does the current version of Recalbox support temperature control with the official Raspberry case fan?

https://www.raspberrypi.org/products/raspberry-pi-4-case-fan/