slow, braking system



  • hello, why after the upgrade to 4.1 has become a strong brake system?
    In the spring, updated to 4.1 was the same, also slowed down.


  • Moderator
    Team

    Humm I don't understand



  • @rockaddicted music in the menu slowed and games began to work slower...
    if put the version below 4.1 then everything works well


  • Moderator
    Team

    @edvis hummm never add this kind of problem and you are the first one to report that.
    what is your configuration ? rpi version ? share on usb ? if usb, formated on which FS ?



  • @rockaddicted ok, a little later I will write





  • @rockaddicted RASPBERRY PI 3 model B v. 1.2



  • @rockaddicted

    '''

    System Variable

    You can configure your recalbox from here

    To set a variable, remove the first ; on the line

    ------------ A - System Options -----------

    Uncomment the system.power.switch you use

    ;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
    ;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
    ;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013
    ;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
    ;system.power.switch=WITTYPI # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi
    ;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
    ;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
    ;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)
    ;system.power.switch=PIN356PUSHRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN)

    fbcp FrameBuffer Copy Program

    For small TFT screen on GPIO and SPI

    See https://github.com/recalbox/recalbox-os/wiki/Utility---Use-of-fbcp-for-small-TFT-screen-%28EN%29 for details

    Needed for Waveshare 3.2" 3.5" TFT screen, 2.8" Adafruit screen

    See https://github.com/recalbox/recalbox-os/wiki/TFT-Screen-SPI-Bus-(EN)

    for support and configuration details needed by /boot/config.txt

    system.fbcp.enabled=0

    Recalbox Manager (http manager)

    system.manager.enabled=1

    1 or 2, depending on the manager version you wish

    system.manager.version=2

    Recalbox security

    enforce security

    samba password required

    disable virtual gamepads

    system.security.enabled=0

    Recalbox API (REST)

    system.api.enabled=1

    Allow a specific resolution for ES only from the command : tvservice -m [MODE]

    Leave commented for the default usual behaviour

    ;system.es.videomode=CEA 4 HDMI

    EmulationStation

    menu style

    default -> default all options menu

    none -> no menu except the game search menu

    bartop -> less menu, only needed for bartops

    emulationstation.menu=default

    Select a system to show on boot (use rom directory name) (string)

    emulationstation.selectedsystem=favorites

    Show the gamelist of the first or selected system on boot (0,1)

    emulationstation.bootongamelist=0

    Disable system view ES will boot and show ONLY the first or selected system (0,1)

    emulationstation.hidesystemview=0

    Parse Gamelists only. Show only games listed in gamelist.xml files (0,1)

    emulationstation.gamelistonly=0

    Force basicgameList view to be displayed, even if your game systems are scraped (0,1)

    emulationstation.forcebasicgamelistview=0

    Emulator special keys

    default -> default all special keys

    nomenu -> cannot popup the emulator menu

    none -> no special keys in emulators

    system.emulators.specialkeys=default

    Show or hide kodi in emulationstation (0,1)

    kodi.enabled=1

    Start kodi at launch (0,1)

    kodi.atstartup=0

    set x button shortcut (0,1)

    kodi.xbutton=1

    Kodi can wait for a network component before starting

    waithost is the ip or hostname that must answer to a ping to validate the availability

    waittime is the maximum time waited when kodi boots

    if waitmode is required, kodi will not start if the component is not available

    if waitmode is wish, kodi will start if the component is not available

    if waitmode is not set or has another value, kodi will start immediately

    ;kodi.network.waitmode=required
    ;kodi.network.waittime=10
    ;kodi.network.waithost=192.168.0.50

    ------------ B - Network ------------

    Set system hostname

    system.hostname=RECALBOX

    Activate wifi (0,1)

    wifi.enabled=0

    Wifi SSID (string)

    ;wifi.ssid=new ssid

    Wifi KEY (string)

    after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"

    you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot

    Escape your special chars (# ; $) with a backslash : $ => $

    ;wifi.key=new key

    secondary wifi (not configurable via the user interface)

    ;wifi2.ssid=new ssid
    ;wifi2.key=new key

    third wifi (not configurable via the user interface)

    ;wifi3.ssid=new ssid
    ;wifi3.key=new key

    Samba share

    system.samba.enabled=1

    Virtual Gamepads

    system.virtual-gamepads.enabled=1

    SSH

    system.ssh.enabled=1

    ------------ C - Audio ------------

    Set the audio device (auto, hdmi, jack)

    audio.device=jack

    Set system volume (0..100)

    audio.volume=79

    Enable or disable system sounds in ES (0,1)

    audio.bgmusic=1

    -------------- D - Controllers -----------------

    Enable support for standard bluetooth controllers

    controllers.bluetooth.enabled=1

    Please enable only one of these

    -------------- D1 - PS3 Controllers ------------

    ##Enable PS3 controllers support
    controllers.ps3.enabled=1

    Choose a driver between bluez, official and shanwan

    bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis

    official -> sixad drivers, support official and gasia sisaxis

    shanwan -> shanwan drivers, support official and shanwan sisaxis

    controllers.ps3.driver=bluez

    ------------ D2 - GPIO Controllers ------------

    GPIO Controllers

    enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)

    controllers.gpio.enabled=0

    mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)

    controllers.gpio.args=map=1,2

    DB9 Controllers

    Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)

    controllers.db9.enabled=0

    db9 arguments

    controllers.db9.args=map=1

    Gamecon controllers

    Enable gamecon controllers, for nes, snes psx (0,1)

    controllers.gamecon.enabled=0

    gamecon_args

    controllers.gamecon.args=map=1

    XGaming's XArcade Tankstik and other compatible devices

    controllers.xarcade.enabled=1

    ------------ F - Language and keyboard ------------

    Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)

    system.language=ru_RU

    set the keyboard layout (fr,en,de,us,es)

    ;system.kblayout=us

    Set you local time

    Select your timezone from : ls /usr/share/zoneinfo/ (string)

    ;system.timezone=Europe/Paris

    ------------ G - UPDATES ------------

    Automatically check for updates at start (0,1)

    updates.enabled=0

    Update type : default to stable

    updates.type=stable

    ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------

    The global value will be used for all emulators, except if the value

    is redefined in the emulator

    Set game resolution for emulators

    select your mode from the command : tvservice -m [MODE]

    CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced

    CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive

    use 'default' for using the default resolution

    (string)

    global.videomode=default

    Shader set

    Automatically select shaders for all systems

    ## (none, retro, scanlines)
    global.shaderset=none

    Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)

    global.integerscale=0

    Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)

    global.shaders=

    Set ratio for all emulators (auto,4/3,16/9,16/10,custom)

    global.ratio=4/3

    Set smooth for all emulators (0,1)

    global.smooth=0

    Set rewind for all emulators (0,1)

    global.rewind=0

    Set autosave/load savestate for all emulators (0,1)

    global.autosave=0

    Enable retroarchievements (0,1)

    Set your www.retroachievements.org username/password

    Escape your special chars (# ; $) with a backslash : $ => $

    global.retroachievements=0
    global.retroachievements.hardcore=0
    global.retroachievements.username=
    global.retroachievements.password=

    Set retroarch input driver (auto, udev, sdl2)

    If you don't have issues with your controllers, let auto

    global.inputdriver=auto

    If you do not want recalboxOS to generate the configuration for all emulators (string)

    ;global.configfile=/path/to/my/configfile.cfg

    ------------ I - EMULATORS CHOICES -----------

    You can override the global configuration here

    Here is the snes example

    ;snes.videomode=CEA 4 HDMI
    snes.core=snes9x_next
    ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
    ;snes.ratio=16/9
    snes.smooth=0
    ;snes.rewind=1
    ;snes.autosave=0
    ;snes.emulator=libretro
    ;snes.integerscale=0

    If you do not want recalboxOS to generate the configuration for the emulator :

    ;snes.configfile=/path/to/my/configfile.cfg

    Default cores for RPi3

    snes.core=snes9x_next
    gba.core=mgba
    mame.core=mame078
    nes.core=fceumm

    NeoGeo emulator

    You can use pifba or a libretro core (fba2x,libretro)

    neogeo.emulator=libretro

    If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)

    neogeo.core=fba

    N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)

    So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).

    If your screen is not compatible with one of these video modes, please check the recalbox's wiki.

    n64.videomode=default

    If you are using a CRT screen, please change the setting above with this one :

    n64.videomode=default

    Dreamcast emulator

    Like N64, such a CPU intensive emulator needs a small resolution

    Consider DMT 4 HDMI (640480) or DMT 9 HDMI (800600). If you have a black screen on dreamcast, try DMT 9 HDMI here

    dreamcast.videomode=DMT 4 HDMI

    Configurations generated by Recalbox

    system.es.menu=default
    controllers.xboxdrv.enabled=0
    controllers.xboxdrv.nbcontrols=2
    gba.ratio=4/3
    gba.smooth=0
    megadrive.ratio=4/3
    nes.emulator=libretro
    gbc.smooth=1
    n64.smooth=1
    n64.emulator=default
    psx.smooth=1



  • @rockaddicted I remember in the spring, the first update to 4.1 worked well, and then it was updated and began to slow down everything



  • @edvis as you're the only one having that problem, i believe the problem is just on your side. What class is your SD ? any overclock ? Does ithappen with a fresh install ?



  • @substring
    on any overclock, micro sd sandisk ultra 32gb 10 class, with the new installation also slows down0_1508075753408_Screenshot_26.png


  • Moderator
    Team

    do you have a yellow "flash" icone on the top right of your screen ?





  • @rockaddicted
    does this micro sd fit?


  • Moderator
    Team

    32gb ? nope it is ok.
    I really don't know.
    You roms are on USB or SD card ?

    The known issue about these kind of problems on a clean install are :

    • power supply issue (the yellow 'lightning" icone on top right of the screen)
    • bad sd card (chinese copy with bad transfer rate)
    • overclock unsupported on rpi

    I don't have any new ideas... @Substring and you ?



  • @rockaddicted
    without overclocking, the problem is the same.
    sd card is good. everything is on sd card.
    "overclock unsupported on rpi" what do you mean?


  • Moderator
    Team

    @edvis each rpi react differently to overclock. Sometimes once enabled system become slow, unstable etc...



  • @Edvis Hi you use crt tv? I have the same problem onli in crt tv, hdmi works great.



  • @jeevuz hello, yes I use the crt TV, tired already to solve this problem.
    Also today I wanted to go to a friend to check whether it works on hdmi



  • @rockaddicted

    @jeevuz said in slow, braking system:

    @Edvis Hi you use crt tv? I have the same problem onli in crt tv, hdmi works great.


Log in to reply
 

Want to support us ?

Join us on :

268
Online

31071
Users

15116
Topics

113740
Posts

Looks like your connection to Recalbox Forum was lost, please wait while we try to reconnect.