[Solution][Résolu]Manette PS3 chinoise CECHZC2H
-
La je passe direct par le terminal comme me l'a conseillé Rockaddicted.
-
Toujours dans l'impasse, je ne trouve pas la solution au problème. Mes manettes ne seraient pas reconnues par recalbox par manque de pilotes, je ne vois que ça. D'autres idées ?
-
Et en 3.2.11 de recalbox, sont elles reconnues ?
-
Non, c'est pareil.
-
Je suis toujours dans l'impasse...Personne pour m'aider please
-
up ! ou plutôt help
-
Bonjour il faudrait que tes dmesg soient plus complet il y a surement d autres messages il faut le faire pour ton dongle et pour ta manette PS3 as tu vérifié si ton dongle et manette ps3 fonctionnaient sur un autre périphérique ? si oui il me semble qu il faut réinitialiser la manette pour que la désynchronisation soit effective d apres d autres sujets.
-
Bonjour, Ayant acheter par erreur cette meme manette,auriez vous le fichier sixad-sixasis ,car il n'est plus disponible. Merci à vous.
-
De mon coté c'est toujours pareil, je ne parviens pas à connecter ma manette PS3 version SHENGHIC. Voilà mon dmeg complet : [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.3-v7 (matthieu@pechuga) (gcc version 4.9.3 (Buildroot 2015.08-git-g085f8d2-dirty) ) #1 SMP PREEMPT Wed Nov 18 20:14:03 CET 2015 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: BCM2709 [ 0.000000] cma: Reserved 8 MiB at 0x1e800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 126976 [ 0.000000] free_area_init_node: node 0, pgdat 80ac6400, node_mem_map 9e396000 [ 0.000000] Normal zone: 1116 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] [bcm2709_smp_init_cpus] enter (8640->f3003010) [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 [ 0.000000] PERCPU: Embedded 11 pages/cpu @9e366000 s12672 r8192 d24192 u45056 [ 0.000000] pcpu-alloc: s12672 r8192 d24192 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125860 [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1776 bcm2708_fb.fbheight=952 bcm2709.boardrev=0xa01041 bcm2709.serial=0x1108991a smsc95xx.macaddr=B8:27:EB:08:99:1A bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p6 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 482768K/507904K available (7920K kernel code, 451K rwdata, 2192K rodata, 484K init, 777K bss, 16944K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0x9f800000 - 0xff000000 (1528 MB) [ 0.000000] lowmem : 0x80000000 - 0x9f000000 ( 496 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x809e84f0 (10114 kB) [ 0.000000] .init : 0x809e9000 - 0x80a62000 ( 484 kB) [ 0.000000] .data : 0x80a62000 - 0x80ad2df4 ( 452 kB) [ 0.000000] .bss : 0x80ad2df4 - 0x80b952e4 ( 778 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:608 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt). [ 0.000015] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns [ 0.000039] Switching to timer-based delay loop, resolution 52ns [ 0.000328] Console: colour dummy device 80x30 [ 0.000551] console [tty3] enabled [ 0.000581] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000609] pid_max: default: 32768 minimum: 301 [ 0.001049] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001072] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002377] Initializing cgroup subsys memory [ 0.002429] Initializing cgroup subsys devices [ 0.002458] Initializing cgroup subsys freezer [ 0.002500] Initializing cgroup subsys blkio [ 0.002592] CPU: Testing write buffer coherency: ok [ 0.002681] ftrace: allocating 25272 entries in 75 pages [ 0.065367] missing device node for CPU 0 [ 0.065408] missing device node for CPU 1 [ 0.065421] missing device node for CPU 2 [ 0.065432] missing device node for CPU 3 [ 0.065453] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.065470] [bcm2709_smp_prepare_cpus] enter [ 0.065618] Setting up static identity map for 0x72e9c0 - 0x72ea18 [ 0.125389] [bcm2709_boot_secondary] cpu:1 started (0) 18 [ 0.125773] [bcm2709_secondary_init] enter cpu:1 [ 0.125834] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.145338] [bcm2709_boot_secondary] cpu:2 started (0) 17 [ 0.145665] [bcm2709_secondary_init] enter cpu:2 [ 0.145702] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.165428] [bcm2709_boot_secondary] cpu:3 started (0) 18 [ 0.165672] [bcm2709_secondary_init] enter cpu:3 [ 0.165708] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.165814] Brought up 4 CPUs [ 0.165842] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.165854] CPU: All CPU(s) started in SVC mode. [ 0.166884] devtmpfs: initialized [ 0.186933] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.188407] pinctrl core: initialized pinctrl subsystem [ 0.188954] regulator-dummy: no parameters [ 0.189641] NET: Registered protocol family 16 [ 0.195540] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.225201] cpuidle: using governor ladder [ 0.255231] cpuidle: using governor menu [ 0.255810] bcm2709.uart_clock = 3000000 [ 0.255854] of_platform_populate failed: -22 [ 0.258435] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.258453] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.258494] mailbox: Broadcom VideoCore Mailbox driver [ 0.258595] bcm2708_vcio: mailbox at f300b880 [ 0.258976] bcm_power: Broadcom power driver [ 0.258995] bcm_power_open() -> 0 [ 0.259007] bcm_power_request(0,
[ 0.759673] bcm_mailbox_read -> 00000080, 0 [ 0.759687] bcm_power_request -> 0 [ 0.759825] Serial: AMBA PL011 UART driver [ 0.759961] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3 [ 0.838352] SCSI subsystem initialized [ 0.838810] usbcore: registered new interface driver usbfs [ 0.838918] usbcore: registered new interface driver hub [ 0.839075] usbcore: registered new device driver usb [ 0.839767] Advanced Linux Sound Architecture Driver Initialized. [ 0.840704] Bluetooth: Core ver 2.20 [ 0.840773] NET: Registered protocol family 31 [ 0.840788] Bluetooth: HCI device and connection manager initialized [ 0.840813] Bluetooth: HCI socket layer initialized [ 0.840833] Bluetooth: L2CAP socket layer initialized [ 0.840926] Bluetooth: SCO socket layer initialized [ 0.841554] cfg80211: Calling CRDA to update world regulatory domain [ 0.842783] Switched to clocksource arch_sys_counter [ 0.883019] FS-Cache: Loaded [ 0.883400] CacheFiles: Loaded [ 0.898763] NET: Registered protocol family 2 [ 0.899927] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.900017] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.900123] TCP: Hash tables configured (established 4096 bind 4096) [ 0.900202] TCP: reno registered [ 0.900226] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.900267] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.900575] NET: Registered protocol family 1 [ 0.901176] RPC: Registered named UNIX socket transport module. [ 0.901195] RPC: Registered udp transport module. [ 0.901206] RPC: Registered tcp transport module. [ 0.901218] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.902151] bcm2708_dma: DMA manager at f3007000 [ 0.902296] bcm2708_gpio: bcm2708_gpio_probe 80a8e718 [ 0.903108] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 0.905301] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.905534] audit: initializing netlink subsys (disabled) [ 0.905600] audit: type=2000 audit(0.869:1): initialized [ 0.923506] DLM installed [ 0.926306] FS-Cache: Netfs 'nfs' registered for caching [ 0.927312] NFS: Registering the id_resolver key type [ 0.927385] Key type id_resolver registered [ 0.927398] Key type id_legacy registered [ 0.928452] ntfs: driver 2.1.31 [Flags: R/W]. [ 0.929366] fuse init (API version 7.23) [ 0.932984] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.933204] io scheduler noop registered [ 0.933232] io scheduler deadline registered (default) [ 0.933596] io scheduler cfq registered [ 0.935260] BCM2708FB: allocated DMA memory dec00000 [ 0.935311] BCM2708FB: allocated DMA channel 0 @ f3007000 [ 0.963213] Console: switching to colour frame buffer device 222x59 [ 0.981496] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver [ 0.982068] uart-pl011 dev:f1: no DMA platform data [ 0.982655] vc-cma: Videocore CMA driver [ 0.982671] vc-cma: vc_cma_base = 0x00000000 [ 0.982684] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 0.982695] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 0.996071] brd: module loaded [ 1.002841] loop: module loaded [ 1.003240] vchiq: vchiq_init_state: slot_zero = 0x9e800000, is_master = 0 [ 1.004097] Loading iSCSI transport class v2.0-870. [ 1.004913] usbcore: registered new interface driver cdc_ether [ 1.005060] usbcore: registered new interface driver smsc95xx [ 1.005132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.005154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.005209] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.205599] Core Release: 2.80a [ 1.205622] Setting default values for core params [ 1.205672] Finished setting default values for core params [ 1.406095] Using Buffer DMA mode [ 1.406112] Periodic Transfer Interrupt Enhancement - disabled [ 1.406124] Multiprocessor Interrupt Enhancement - disabled [ 1.406137] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 1.406154] Dedicated Tx FIFOs mode [ 1.406620] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0x9ec14000 dma = 0xdec14000 len=9024 [ 1.406660] FIQ FSM acceleration enabled for : [ 1.406660] Non-periodic Split Transactions [ 1.406660] Periodic Split Transactions [ 1.406660] High-Speed Isochronous Endpoints [ 1.406686] dwc_otg: Microframe scheduler enabled [ 1.406760] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80476bd4 [ 1.406781] WARN::hcd_init_fiq:413: FIQ ASM at 0x80476f44 length 36 [ 1.406802] WARN::hcd_init_fiq:438: MPHI regs_base at 0x9f80a000 [ 1.406832] dwc_otg bcm2708_usb: DWC OTG Controller [ 1.406885] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1 [ 1.406938] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000 [ 1.406994] Init: Port Power? op_state=1 [ 1.407005] Init: Power Port (0) [ 1.407317] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.407339] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.407357] usb usb1: Product: DWC OTG Controller [ 1.407373] usb usb1: Manufacturer: Linux 3.19.3-v7 dwc_otg_hcd [ 1.407389] usb usb1: SerialNumber: bcm2708_usb [ 1.408530] hub 1-0:1.0: USB hub found [ 1.408598] hub 1-0:1.0: 1 port detected [ 1.409301] dwc_otg: FIQ enabled [ 1.409316] dwc_otg: NAK holdoff enabled [ 1.409327] dwc_otg: FIQ split-transaction FSM enabled [ 1.409372] Module dwc_common_port init [ 1.409944] mousedev: PS/2 mouse device common for all mice [ 1.411139] Bluetooth: Virtual HCI driver ver 1.5 [ 1.411365] Bluetooth: HCI UART driver ver 2.2 [ 1.411382] Bluetooth: HCI H4 protocol initialized [ 1.411394] Bluetooth: HCI BCSP protocol initialized [ 1.411406] Bluetooth: HCILL protocol initialized [ 1.411417] Bluetooth: HCIATH3K protocol initialized [ 1.411428] Bluetooth: HCI Three-wire UART (H5) protocol initialized [ 1.411565] usbcore: registered new interface driver bcm203x [ 1.411691] usbcore: registered new interface driver bpa10x [ 1.411828] usbcore: registered new interface driver bfusb [ 1.411972] usbcore: registered new interface driver btusb [ 1.411996] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 1.412178] usbcore: registered new interface driver ath3k [ 1.412444] bcm2835-cpufreq: min=600000 max=900000 [ 1.425151] Driver 'mmcblk' needs updating - please use bus_type methods [ 1.425225] sdhci: Secure Digital Host Controller Interface driver [ 1.425234] sdhci: Copyright(c) Pierre Ossman [ 1.425386] mmc-bcm2835 mmc-bcm2835.0: mmc_debug:0 [ 1.425399] mmc-bcm2835 mmc-bcm2835.0: DMA channels allocated [ 1.463023] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.464423] ledtrig-cpu: registered to indicate activity on CPUs [ 1.464528] hidraw: raw HID events driver (C) Jiri Kosina [ 1.469157] usbcore: registered new interface driver usbhid [ 1.469168] usbhid: USB HID core driver [ 1.469642] TCP: cubic registered [ 1.469659] Initializing XFRM netlink socket [ 1.476004] NET: Registered protocol family 10 [ 1.480486] sit: IPv6 over IPv4 tunneling driver [ 1.481352] NET: Registered protocol family 17 [ 1.481543] Bluetooth: RFCOMM TTY layer initialized [ 1.481565] Bluetooth: RFCOMM socket layer initialized [ 1.481595] Bluetooth: RFCOMM ver 1.11 [ 1.481618] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.481633] Bluetooth: HIDP socket layer initialized [ 1.482219] sctp: Hash tables configured (established 16384 bind 16384) [ 1.482746] Key type dns_resolver registered [ 1.483253] Registering SWP/SWPB emulation handler [ 1.484033] registered taskstats version 1 [ 1.484243] vc-sm: Videocore shared memory driver [ 1.484260] [vc_sm_connected_init]: start [ 1.484847] [vc_sm_connected_init]: end - returning 0 [ 1.487133] ALSA device list: [ 1.487148] #0: bcm2835 ALSA [ 1.487789] Waiting for root device /dev/mmcblk0p6... [ 1.500227] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.502343] mmc0: new high speed SDHC card at address 59b4 [ 1.502985] mmcblk0: mmc0:59b4 USD 14.7 GiB [ 1.506250] mmcblk0: p1 p2 < p5 p6 p7 > p3 [ 1.593716] EXT4-fs (mmcblk0p6): couldn't mount as ext3 due to feature incompatibilities [ 1.594370] EXT4-fs (mmcblk0p6): couldn't mount as ext2 due to feature incompatibilities [ 1.602937] Indeed it is in host mode hprt0 = 00021501 [ 1.618523] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ 1.618580] VFS: Mounted root (ext4 filesystem) on device 179:6. [ 1.628834] devtmpfs: mounted [ 1.629425] Freeing unused kernel memory: 484K (809e9000 - 80a62000) [ 1.782884] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.783034] Indeed it is in host mode hprt0 = 00001101 [ 1.870516] EXT4-fs (mmcblk0p6): re-mounted. Opts: data=ordered [ 1.983161] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 1.983182] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.984018] hub 1-1:1.0: USB hub found [ 1.984121] hub 1-1:1.0: 5 ports detected [ 2.223278] udevd[91]: starting version 3.1.2 [ 2.240476] random: udevd urandom read with 69 bits of entropy available [ 2.262971] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.363370] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 2.363398] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.370226] smsc95xx v1.0.4 [ 2.426723] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:08:99:1a [ 2.503132] usb 1-1.2: new low-speed USB device number 4 using dwc_otg [ 2.617899] usb 1-1.2: New USB device found, idVendor=0c45, idProduct=7401 [ 2.617926] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.617938] usb 1-1.2: Product: USB Device [ 2.617949] usb 1-1.2: Manufacturer: SONiX [ 2.632450] input: SONiX USB Device as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0C45:7401.0001/input/input0 [ 2.633711] hid-generic 0003:0C45:7401.0001: input,hidraw0: USB HID v1.00 Mouse [SONiX USB Device] on usb-bcm2708_usb-1.2/input0 [ 2.712951] usb 1-1.3: new full-speed USB device number 5 using dwc_otg [ 2.820553] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b [ 2.820580] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.820592] usb 1-1.3: Product: USB Receiver [ 2.820602] usb 1-1.3: Manufacturer: Logitech [ 2.912947] usb 1-1.4: new full-speed USB device number 6 using dwc_otg [ 3.024566] usb 1-1.4: New USB device found, idVendor=054c, idProduct=0268 [ 3.024587] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.024599] usb 1-1.4: Product: PLAYSTATION(R)3Conteroller [ 3.024610] usb 1-1.4: Manufacturer: SHENGHIC 2009/0708ZXW-V1Inc. [ 3.272869] usb 1-1.5: new full-speed USB device number 7 using dwc_otg [ 3.386987] usb 1-1.5: New USB device found, idVendor=0a12, idProduct=0001 [ 3.387004] usb 1-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.387015] usb 1-1.5: Product: CSR8510 A10 [ 3.440496] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-bcm2708_usb-1.3/input2 [ 3.570077] input: Logitech K250 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/0003:046D:2015.0006/input/input1 [ 3.570778] logitech-hidpp-device 0003:046D:2015.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech K250] on usb-bcm2708_usb-1.3:2 [ 3.700462] random: nonblocking pool is initialized [ 13.174914] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 13.175124] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.690398] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.691407] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 20.137110] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 20.255156] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 21.866397] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 397.501649] usb 1-1.4: USB disconnect, device number 6 [ 425.903104] usb 1-1.4: new full-speed USB device number 8 using dwc_otg [ 426.017278] usb 1-1.4: New USB device found, idVendor=054c, idProduct=0268 [ 426.017335] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 426.017350] usb 1-1.4: Product: PLAYSTATION(R)3Conteroller [ 426.017362] usb 1-1.4: Manufacturer: SHENGHIC 2009/0708ZXW-V1Inc. [ 426.031637] input: SHENGHIC 2009/0708ZXW-V1Inc. PLAYSTATION(R)3Conteroller as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:054C:0268.0007/input/input2 [ 426.033061] sony 0003:054C:0268.0007: input,hiddev0,hidraw3: USB HID v1.11 Joystick [SHENGHIC 2009/0708ZXW-V1Inc. PLAYSTATION(R)3Conteroller] on usb-bcm2708_usb-1.4/input0 -
Je viens de mettre à jour le lien pour le fichier sixad-sixasis !! désolé pour le gros retard..
