[Solution][Résolu]Manette PS3 chinoise CECHZC2H

[seiji]

voilà le resultat du dmesg : [   65.937436] usb 1-1.5: USB disconnect, device number 6 [  112.512881] usb 1-1.5: new full-speed USB device number 7 using dwc_otg [  112.626923] usb 1-1.5: New USB device found, idVendor=0a12, idProduct=0001 [  112.626950] usb 1-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [  112.626962] usb 1-1.5: Product: CSR8510 A10

[seiji]

Et voila le dmesg du ma manette PS3 : [   79.595927] usb 1-1.4: Product: PLAYSTATION(R)3Conteroller [   79.595939] usb 1-1.4: Manufacturer: SHENGHIC 2009/0708ZXW-V1Inc.

[kintaro-oe]

Yop! Juste pour confirmer! Mes modifications de configuration ne fonctionnait pas quand j'utilisais certains éditeur: depuis que j'utilise notepad++ ça fonctionne! https://notepad-plus-plus.org/fr/

[seiji]

La je passe direct par le terminal comme me l'a conseillé Rockaddicted.

[seiji]

Toujours dans l'impasse, je ne trouve pas la solution au problème. Mes manettes ne seraient pas reconnues par recalbox par manque de pilotes, je ne vois que ça. D'autres idées ?

[rockaddicted]

Et en 3.2.11 de recalbox, sont elles reconnues ?

[seiji]

Non, c'est pareil.

[seiji]

Je suis toujours dans l'impasse...Personne pour m'aider please

[seiji]

up ! ou plutôt help

[acris]

Bonjour il faudrait que tes dmesg soient plus complet il y a surement d autres messages il faut le faire pour ton dongle et pour ta manette PS3 as tu vérifié si ton dongle et manette ps3 fonctionnaient sur un autre périphérique ? si oui il me semble qu il faut réinitialiser la manette pour que la désynchronisation soit effective d apres d autres sujets.

[djgoliath]

Bonjour, Ayant acheter par erreur cette meme manette,auriez vous le fichier sixad-sixasis ,car il n'est plus disponible. Merci à vous.

[seiji]

De mon coté c'est toujours pareil, je ne parviens pas à connecter ma manette PS3 version SHENGHIC. Voilà mon dmeg complet : [    0.000000] Booting Linux on physical CPU 0xf00 [    0.000000] Initializing cgroup subsys cpu [    0.000000] Initializing cgroup subsys cpuacct [    0.000000] Linux version 3.19.3-v7 (matthieu@pechuga) (gcc version 4.9.3 (Buildroot 2015.08-git-g085f8d2-dirty) ) #1 SMP PREEMPT Wed Nov 18 20:14:03 CET 2015 [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [    0.000000] Machine: BCM2709 [    0.000000] cma: Reserved 8 MiB at 0x1e800000 [    0.000000] Memory policy: Data cache writealloc [    0.000000] On node 0 totalpages: 126976 [    0.000000] free_area_init_node: node 0, pgdat 80ac6400, node_mem_map 9e396000 [    0.000000]   Normal zone: 1116 pages used for memmap [    0.000000]   Normal zone: 0 pages reserved [    0.000000]   Normal zone: 126976 pages, LIFO batch:31 [    0.000000] [bcm2709_smp_init_cpus] enter (8640->f3003010) [    0.000000] [bcm2709_smp_init_cpus] ncores=4 [    0.000000] PERCPU: Embedded 11 pages/cpu @9e366000 s12672 r8192 d24192 u45056 [    0.000000] pcpu-alloc: s12672 r8192 d24192 u45056 alloc=11*4096 [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125860 [    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1776 bcm2708_fb.fbheight=952 bcm2709.boardrev=0xa01041 bcm2709.serial=0x1108991a smsc95xx.macaddr=B8:27:EB:08:99:1A bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p6 rootwait [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [    0.000000] Memory: 482768K/507904K available (7920K kernel code, 451K rwdata, 2192K rodata, 484K init, 777K bss, 16944K reserved, 8192K cma-reserved) [    0.000000] Virtual kernel memory layout: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB) [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB) [    0.000000]     vmalloc : 0x9f800000 - 0xff000000   (1528 MB) [    0.000000]     lowmem  : 0x80000000 - 0x9f000000   ( 496 MB) [    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB) [    0.000000]       .text : 0x80008000 - 0x809e84f0   (10114 kB) [    0.000000]       .init : 0x809e9000 - 0x80a62000   ( 484 kB) [    0.000000]       .data : 0x80a62000 - 0x80ad2df4   ( 452 kB) [    0.000000]        .bss : 0x80ad2df4 - 0x80b952e4   ( 778 kB) [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [    0.000000] Preemptible hierarchical RCU implementation. [    0.000000] NR_IRQS:608 [    0.000000] Architected cp15 timer(s) running at 19.20MHz (virt). [    0.000015] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns [    0.000039] Switching to timer-based delay loop, resolution 52ns [    0.000328] Console: colour dummy device 80x30 [    0.000551] console [tty3] enabled [    0.000581] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [    0.000609] pid_max: default: 32768 minimum: 301 [    0.001049] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [    0.001072] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [    0.002377] Initializing cgroup subsys memory [    0.002429] Initializing cgroup subsys devices [    0.002458] Initializing cgroup subsys freezer [    0.002500] Initializing cgroup subsys blkio [    0.002592] CPU: Testing write buffer coherency: ok [    0.002681] ftrace: allocating 25272 entries in 75 pages [    0.065367] missing device node for CPU 0 [    0.065408] missing device node for CPU 1 [    0.065421] missing device node for CPU 2 [    0.065432] missing device node for CPU 3 [    0.065453] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [    0.065470] [bcm2709_smp_prepare_cpus] enter [    0.065618] Setting up static identity map for 0x72e9c0 - 0x72ea18 [    0.125389] [bcm2709_boot_secondary] cpu:1 started (0) 18 [    0.125773] [bcm2709_secondary_init] enter cpu:1 [    0.125834] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [    0.145338] [bcm2709_boot_secondary] cpu:2 started (0) 17 [    0.145665] [bcm2709_secondary_init] enter cpu:2 [    0.145702] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [    0.165428] [bcm2709_boot_secondary] cpu:3 started (0) 18 [    0.165672] [bcm2709_secondary_init] enter cpu:3 [    0.165708] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [    0.165814] Brought up 4 CPUs [    0.165842] SMP: Total of 4 processors activated (153.60 BogoMIPS). [    0.165854] CPU: All CPU(s) started in SVC mode. [    0.166884] devtmpfs: initialized [    0.186933] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [    0.188407] pinctrl core: initialized pinctrl subsystem [    0.188954] regulator-dummy: no parameters [    0.189641] NET: Registered protocol family 16 [    0.195540] DMA: preallocated 4096 KiB pool for atomic coherent allocations [    0.225201] cpuidle: using governor ladder [    0.255231] cpuidle: using governor menu [    0.255810] bcm2709.uart_clock = 3000000 [    0.255854] of_platform_populate failed: -22 [    0.258435] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [    0.258453] hw-breakpoint: maximum watchpoint size is 8 bytes. [    0.258494] mailbox: Broadcom VideoCore Mailbox driver [    0.258595] bcm2708_vcio: mailbox at f300b880 [    0.258976] bcm_power: Broadcom power driver [    0.258995] bcm_power_open() -> 0 [    0.259007] bcm_power_request(0, [    0.759673] bcm_mailbox_read -> 00000080, 0 [    0.759687] bcm_power_request -> 0 [    0.759825] Serial: AMBA PL011 UART driver [    0.759961] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3 [    0.838352] SCSI subsystem initialized [    0.838810] usbcore: registered new interface driver usbfs [    0.838918] usbcore: registered new interface driver hub [    0.839075] usbcore: registered new device driver usb [    0.839767] Advanced Linux Sound Architecture Driver Initialized. [    0.840704] Bluetooth: Core ver 2.20 [    0.840773] NET: Registered protocol family 31 [    0.840788] Bluetooth: HCI device and connection manager initialized [    0.840813] Bluetooth: HCI socket layer initialized [    0.840833] Bluetooth: L2CAP socket layer initialized [    0.840926] Bluetooth: SCO socket layer initialized [    0.841554] cfg80211: Calling CRDA to update world regulatory domain [    0.842783] Switched to clocksource arch_sys_counter [    0.883019] FS-Cache: Loaded [    0.883400] CacheFiles: Loaded [    0.898763] NET: Registered protocol family 2 [    0.899927] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [    0.900017] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [    0.900123] TCP: Hash tables configured (established 4096 bind 4096) [    0.900202] TCP: reno registered [    0.900226] UDP hash table entries: 256 (order: 1, 8192 bytes) [    0.900267] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [    0.900575] NET: Registered protocol family 1 [    0.901176] RPC: Registered named UNIX socket transport module. [    0.901195] RPC: Registered udp transport module. [    0.901206] RPC: Registered tcp transport module. [    0.901218] RPC: Registered tcp NFSv4.1 backchannel transport module. [    0.902151] bcm2708_dma: DMA manager at f3007000 [    0.902296] bcm2708_gpio: bcm2708_gpio_probe 80a8e718 [    0.903108] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [    0.905301] futex hash table entries: 1024 (order: 4, 65536 bytes) [    0.905534] audit: initializing netlink subsys (disabled) [    0.905600] audit: type=2000 audit(0.869:1): initialized [    0.923506] DLM installed [    0.926306] FS-Cache: Netfs 'nfs' registered for caching [    0.927312] NFS: Registering the id_resolver key type [    0.927385] Key type id_resolver registered [    0.927398] Key type id_legacy registered [    0.928452] ntfs: driver 2.1.31 [Flags: R/W]. [    0.929366] fuse init (API version 7.23) [    0.932984] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [    0.933204] io scheduler noop registered [    0.933232] io scheduler deadline registered (default) [    0.933596] io scheduler cfq registered [    0.935260] BCM2708FB: allocated DMA memory dec00000 [    0.935311] BCM2708FB: allocated DMA channel 0 @ f3007000 [    0.963213] Console: switching to colour frame buffer device 222x59 [    0.981496] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver [    0.982068] uart-pl011 dev:f1: no DMA platform data [    0.982655] vc-cma: Videocore CMA driver [    0.982671] vc-cma: vc_cma_base      = 0x00000000 [    0.982684] vc-cma: vc_cma_size      = 0x00000000 (0 MiB) [    0.982695] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB) [    0.996071] brd: module loaded [    1.002841] loop: module loaded [    1.003240] vchiq: vchiq_init_state: slot_zero = 0x9e800000, is_master = 0 [    1.004097] Loading iSCSI transport class v2.0-870. [    1.004913] usbcore: registered new interface driver cdc_ether [    1.005060] usbcore: registered new interface driver smsc95xx [    1.005132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [    1.005154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [    1.005209] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [    1.205599] Core Release: 2.80a [    1.205622] Setting default values for core params [    1.205672] Finished setting default values for core params [    1.406095] Using Buffer DMA mode [    1.406112] Periodic Transfer Interrupt Enhancement - disabled [    1.406124] Multiprocessor Interrupt Enhancement - disabled [    1.406137] OTG VER PARAM: 0, OTG VER FLAG: 0 [    1.406154] Dedicated Tx FIFOs mode [    1.406620] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0x9ec14000 dma = 0xdec14000 len=9024 [    1.406660] FIQ FSM acceleration enabled for : [    1.406660] Non-periodic Split Transactions [    1.406660] Periodic Split Transactions [    1.406660] High-Speed Isochronous Endpoints [    1.406686] dwc_otg: Microframe scheduler enabled [    1.406760] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80476bd4 [    1.406781] WARN::hcd_init_fiq:413: FIQ ASM at 0x80476f44 length 36 [    1.406802] WARN::hcd_init_fiq:438: MPHI regs_base at 0x9f80a000 [    1.406832] dwc_otg bcm2708_usb: DWC OTG Controller [    1.406885] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1 [    1.406938] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000 [    1.406994] Init: Port Power? op_state=1 [    1.407005] Init: Power Port (0) [    1.407317] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [    1.407339] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [    1.407357] usb usb1: Product: DWC OTG Controller [    1.407373] usb usb1: Manufacturer: Linux 3.19.3-v7 dwc_otg_hcd [    1.407389] usb usb1: SerialNumber: bcm2708_usb [    1.408530] hub 1-0:1.0: USB hub found [    1.408598] hub 1-0:1.0: 1 port detected [    1.409301] dwc_otg: FIQ enabled [    1.409316] dwc_otg: NAK holdoff enabled [    1.409327] dwc_otg: FIQ split-transaction FSM enabled [    1.409372] Module dwc_common_port init [    1.409944] mousedev: PS/2 mouse device common for all mice [    1.411139] Bluetooth: Virtual HCI driver ver 1.5 [    1.411365] Bluetooth: HCI UART driver ver 2.2 [    1.411382] Bluetooth: HCI H4 protocol initialized [    1.411394] Bluetooth: HCI BCSP protocol initialized [    1.411406] Bluetooth: HCILL protocol initialized [    1.411417] Bluetooth: HCIATH3K protocol initialized [    1.411428] Bluetooth: HCI Three-wire UART (H5) protocol initialized [    1.411565] usbcore: registered new interface driver bcm203x [    1.411691] usbcore: registered new interface driver bpa10x [    1.411828] usbcore: registered new interface driver bfusb [    1.411972] usbcore: registered new interface driver btusb [    1.411996] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [    1.412178] usbcore: registered new interface driver ath3k [    1.412444] bcm2835-cpufreq: min=600000 max=900000 [    1.425151] Driver 'mmcblk' needs updating - please use bus_type methods [    1.425225] sdhci: Secure Digital Host Controller Interface driver [    1.425234] sdhci: Copyright(c) Pierre Ossman [    1.425386] mmc-bcm2835 mmc-bcm2835.0: mmc_debug:0 [    1.425399] mmc-bcm2835 mmc-bcm2835.0: DMA channels allocated [    1.463023] sdhci-pltfm: SDHCI platform and OF driver helper [    1.464423] ledtrig-cpu: registered to indicate activity on CPUs [    1.464528] hidraw: raw HID events driver (C) Jiri Kosina [    1.469157] usbcore: registered new interface driver usbhid [    1.469168] usbhid: USB HID core driver [    1.469642] TCP: cubic registered [    1.469659] Initializing XFRM netlink socket [    1.476004] NET: Registered protocol family 10 [    1.480486] sit: IPv6 over IPv4 tunneling driver [    1.481352] NET: Registered protocol family 17 [    1.481543] Bluetooth: RFCOMM TTY layer initialized [    1.481565] Bluetooth: RFCOMM socket layer initialized [    1.481595] Bluetooth: RFCOMM ver 1.11 [    1.481618] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [    1.481633] Bluetooth: HIDP socket layer initialized [    1.482219] sctp: Hash tables configured (established 16384 bind 16384) [    1.482746] Key type dns_resolver registered [    1.483253] Registering SWP/SWPB emulation handler [    1.484033] registered taskstats version 1 [    1.484243] vc-sm: Videocore shared memory driver [    1.484260] [vc_sm_connected_init]: start [    1.484847] [vc_sm_connected_init]: end - returning 0 [    1.487133] ALSA device list: [    1.487148]   #0: bcm2835 ALSA [    1.487789] Waiting for root device /dev/mmcblk0p6... [    1.500227] mmc0: host does not support reading read-only switch, assuming write-enable [    1.502343] mmc0: new high speed SDHC card at address 59b4 [    1.502985] mmcblk0: mmc0:59b4 USD   14.7 GiB [    1.506250]  mmcblk0: p1 p2 < p5 p6 p7 > p3 [    1.593716] EXT4-fs (mmcblk0p6): couldn't mount as ext3 due to feature incompatibilities [    1.594370] EXT4-fs (mmcblk0p6): couldn't mount as ext2 due to feature incompatibilities [    1.602937] Indeed it is in host mode hprt0 = 00021501 [    1.618523] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [    1.618580] VFS: Mounted root (ext4 filesystem) on device 179:6. [    1.628834] devtmpfs: mounted [    1.629425] Freeing unused kernel memory: 484K (809e9000 - 80a62000) [    1.782884] usb 1-1: new high-speed USB device number 2 using dwc_otg [    1.783034] Indeed it is in host mode hprt0 = 00001101 [    1.870516] EXT4-fs (mmcblk0p6): re-mounted. Opts: data=ordered [    1.983161] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [    1.983182] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [    1.984018] hub 1-1:1.0: USB hub found [    1.984121] hub 1-1:1.0: 5 ports detected [    2.223278] udevd[91]: starting version 3.1.2 [    2.240476] random: udevd urandom read with 69 bits of entropy available [    2.262971] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [    2.363370] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [    2.363398] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [    2.370226] smsc95xx v1.0.4 [    2.426723] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:08:99:1a [    2.503132] usb 1-1.2: new low-speed USB device number 4 using dwc_otg [    2.617899] usb 1-1.2: New USB device found, idVendor=0c45, idProduct=7401 [    2.617926] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [    2.617938] usb 1-1.2: Product: USB Device [    2.617949] usb 1-1.2: Manufacturer: SONiX [    2.632450] input: SONiX USB Device as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0C45:7401.0001/input/input0 [    2.633711] hid-generic 0003:0C45:7401.0001: input,hidraw0: USB HID v1.00 Mouse [SONiX USB Device] on usb-bcm2708_usb-1.2/input0 [    2.712951] usb 1-1.3: new full-speed USB device number 5 using dwc_otg [    2.820553] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b [    2.820580] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [    2.820592] usb 1-1.3: Product: USB Receiver [    2.820602] usb 1-1.3: Manufacturer: Logitech [    2.912947] usb 1-1.4: new full-speed USB device number 6 using dwc_otg [    3.024566] usb 1-1.4: New USB device found, idVendor=054c, idProduct=0268 [    3.024587] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [    3.024599] usb 1-1.4: Product: PLAYSTATION(R)3Conteroller [    3.024610] usb 1-1.4: Manufacturer: SHENGHIC 2009/0708ZXW-V1Inc. [    3.272869] usb 1-1.5: new full-speed USB device number 7 using dwc_otg [    3.386987] usb 1-1.5: New USB device found, idVendor=0a12, idProduct=0001 [    3.387004] usb 1-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [    3.387015] usb 1-1.5: Product: CSR8510 A10 [    3.440496] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-bcm2708_usb-1.3/input2 [    3.570077] input: Logitech K250 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/0003:046D:2015.0006/input/input1 [    3.570778] logitech-hidpp-device 0003:046D:2015.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech K250] on usb-bcm2708_usb-1.3:2 [    3.700462] random: nonblocking pool is initialized [   13.174914] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [   13.175124] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [   14.690398] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [   14.691407] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [   20.137110] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [   20.255156] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [   21.866397] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [  397.501649] usb 1-1.4: USB disconnect, device number 6 [  425.903104] usb 1-1.4: new full-speed USB device number 8 using dwc_otg [  426.017278] usb 1-1.4: New USB device found, idVendor=054c, idProduct=0268 [  426.017335] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [  426.017350] usb 1-1.4: Product: PLAYSTATION(R)3Conteroller [  426.017362] usb 1-1.4: Manufacturer: SHENGHIC 2009/0708ZXW-V1Inc. [  426.031637] input: SHENGHIC 2009/0708ZXW-V1Inc. PLAYSTATION(R)3Conteroller as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:054C:0268.0007/input/input2 [  426.033061] sony 0003:054C:0268.0007: input,hiddev0,hidraw3: USB HID v1.11 Joystick [SHENGHIC 2009/0708ZXW-V1Inc. PLAYSTATION(R)3Conteroller] on usb-bcm2708_usb-1.4/input0

[maouu]

Je viens de mettre à jour le lien pour le fichier sixad-sixasis !! désolé pour le gros retard..